Waste Packaging Equipment For Waste And Recycling Available In North Carolina
-
PremiumManufactured by Enerpat Groupbased in CHINA
four shaft shredders, or name it quad shredders, are perfectly suitable for scrap size reduction applications such as e-waste, rubber tire recycling, RDF production, and contaminated materials where uniformed medium particle size is desired. The four shaft shredders are very robust and built to sustain tough operating conditions without problem. ENERPAT four shaft shredders are available in ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Compact equipment that performs several functions in the process of eliminating solids from urban and industrial wastewater treatment plants, minimising their moisture content and volume. Special application in the treatment of solids from screening and roughing processes, helping to achieve greater dryness in the output waste. ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The GS and GL line of high-powered shredders meet the high standards of quality and performance through processing of municipal solid waste, plastics, wood, rubber, paper, cardboard and bulky industrial waste. These machines guarantee high productivity, performance and reliability. The screen allows for various output sizes and preparing material for subsequent ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
These shorter Stationary Compactors are required when a job-site has limited space and high volumes of waste or recyclable material. Overall convenience and bottom-line savings will occur when a roll-off compaction container is utilized. These Stationary Compactors can be easily installed with security chutes, total enclosures, drive-on decks and side load hoppers, just like our larger ...
-
PremiumManufactured by Enerpat Groupbased in CHINA
MSB-E Series Two Shafts Shredders are small to large size reduction machines suitable for processing a wide range of materials to a smaller size. The products can often be sold as is, or be sent for further processing through additional equipment. Throughout typically range between 300kg/hr – 20,000kg/hr+ depending on the model, material type and application. MSB-E Series Two Shafts ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
This unique unit offers a reliable full reading for waste streams that can have memory or spring back tendencies. For corrugated cardboard, resilient packaging, padding, or recyclable materials, this is a great advantage and will save money by eliminating unnecessary trips to the landfill or transfer station. Easily replaces our competitors basic 2 yard compactors with a similar ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
The Stationary Compactor model 3860 was designed for tight spaces requirements, measuring 92.5” from the mating surface to the rear of the unit and a 32” x 60” charge chamber opening and time-tested durable straight-ahead 6” bore cylinder. Like all Sebright compactors, machines will feature premium components, and a proven design, with the performance and long life ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
This high-powered single shaft shredder with a 620mm rotor, hydraulic drive and low rpm can be equipped with a radial pusher or drawer pusher depending on the material being processed. The GL620 is a high-powered single shaft shredder with a 620mm rotor, and equipped with two-90, 110 or 160 kW ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
Rotary air separator is one of sorting products that are developed by JONO's independent research. By this separator, material is separated into heavy fraction and light fraction. With the reasonable structure, high separation efficiency, low noise, small vibration, free- block. It is widely applied in various waste treatment, especially in packaging waste ...
-
PremiumManufactured by Enerpat Groupbased in CHINA
MSB-E Series Two Shafts Shredders are small to large size reduction machines suitable for processing a wide range of materials to a smaller size. The products can often be sold as is, or be sent for further processing through additional equipment. Throughout typically range between 300kg/hr – 20,000kg/hr+ depending on the model, material type and application. MSB-E Series Two Shafts ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
Rotary air separator is one of sorting products that are developed by JONO's independent research.By this separator,material is separated into heavy fraction and light fraction.With the reasonable structure,high separation efficiency, low noise, small vibration,free- block.It is widely applied in various waste treatment, especially in packaging waste ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The GS480 features an enhanced 480 mm single rotor with a drawer pusher and electric motor. The GS and GL line of high-powered shredders meet the high standards of quality and performance through processing of municipal solid waste, plastics, wood, rubber, paper, cardboard and bulky industrial waste. These machines guarantee high productivity, performance and reliability. The screen allows for ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
This high-powered single shaft shredder with a 620mm rotor, hydraulic drive and low rpm can be equipped with a radial pusher or drawer pusher depending on the material being processed. The GL620 is a high-powered single shaft shredder with a 620mm rotor, and equipped with two-90, 110 or 160 kW ...
-
Manufactured by Genox Recycling Tech Co. Ltdbased in CHINA
BEHEMOTH Series Single Shaft Shredders are heavy duty size reduction machines suitable for processing a wide range of materials. These shredders are ideal for especially hard and voluminous products. The large shredding chamber and loading hopper capacity, combined with the PLC controlled horizontal ram pusher ensures optimum feeding of material to the rotor therefore achieving the most ...
-
based in USA
Bethlehem Apparatus has developed several shipping containers to facilitate safe, convenient recycling of mercury waste. By using our DOT and U.N. approved containers, you can be assured that your waste packaging is in full compliance with government ...
-
Manufactured by Shuliy Machinery Co. Ltd.based in CHINA
Plastic bottle recycling line or PET bottle recycling line is a recycling equipment for de-labeling, crushing, washing, drying, and packaging waste PET bottles. Shuliy Machinery has various types of PET bottle crushing washing machines and the whole line can be customized, welcome to visit our factory. ...
-
Manufactured by Mavitec Green Energybased in NETHERLANDS
The Paddle Depacker Model S is the small version of the Paddle Depacker and is designed to separate the packaging from the organic material and produces a clean organic output that is extremely suitable for biogas installations. With its simplicity and low maintenance design the Paddle Depacker Model S distinguishes itself from other ...
-
Manufactured by IDEAL Technologiesbased in FRANCE
The revolution ™ 200 wringer is an industrial wringer for emptying the contents of hollow bodies for recycling. The revolution ™ 200 is designed to manage waste deposits incurred from restaurants, hotels, hot spots, airports and also from industrial production lines including soft drinks, and to empty packaging: cartons, PET / HDPE bottles, yoghurts in PS Aluminium ...
-
Manufactured by PacTec, Inc.based in USA
PacTec's LiftPac is the only self-standing zipper-top hazardous waste bag on the market. This cubic yard bag is the perfect solution for the disposal of household hazardous waste, contaminated PPE, and various other applications. The LiftPac walls are constructed of rigid corrugated fiberboard allowing the bag to be self-standing, while the glued-in 6 mil PE liner provides ultimate leak ...
-
Manufactured by Abellon Clean Energy Limitedbased in INDIA
The concept of EPR or Extended Producer Responsibility, introduced in the Plastic Waste Management (PWM) Rules 2016 as amended 2018, obligates entities - Producers, Importers, Brand Owners (PIBOs) - to ensure that 100% of plastic waste generated during the end of life-cycle of their product is sustainably processed. PIBOs are responsible to take back post-consumer plastic waste from ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you