Waste Processing Applications

17 Results found
Only show results available in Virginia?
OK
  • Category: Waste & Recycling ×

  • Subcategory: Waste Processing ×

Biological wastewater processes for mining

by Biowater Technology     based in Cumberland, RHODE ISLAND (USA)

The mining industry has the potential to use large amounts of wastewater in its operations. Often times these waste streams contain contaminants that require treatment before the water can be re-used or discharged. Biowater has successfully installed highly efficient biofilm treatment processes including our complete mix fixed film (CMFF®) system to remove BOD/COD, and nitrogen from mining waste streams. Biowater’s technologies, such as our CFIC® process, can produce effluent water quality that is acceptable for re-use, reducing the stress on ecosystems in water stressed areas.

Waste processing for the waste industry

by Trislot N.V.     based in Waregem, BELGIUM

Trislot manufactures screens for dewatering, classifying, sizing and other applications for waste processing. All applications are based on the numerous advantages the Trislot screen provides: very precise slots for exact sizing, high strength, all welded structure, non clogging slots, low maintenance, long service life, custom made.

Waste shredding for municipal waste plants

by Lindner-Recyclingtech GmbH     based in Spittal/Drau, AUSTRIA

There are valuable resources in waste that have to be extracted. Being specialists in the processing of waste of all kinds – first and foremost in the area of refuse derived fuels – we constantly work on the advancement of our solutions for customer-oriented and cost-effective shredding.

Shredding of metals with Mercodor shredding systems

by MERCODOR GmbH Sondermaschinenbau KG     based in Frankfurt am Main, GERMANY

The shredding of metals is a very difficult process because, due to their very different characteristics, the metals, such as wire, steel pack binding, stamping waste, titanium sheets, zinc sprues, zinc casting waste, zinc oxide or magnetic bands, have very different requirements to the shredding machines. The Mercodor shredders are best suitable for the shredding of metals and metal composites of any kind and composition.

Recycling Equipment for De-Inking Waste

by Bollegraaf Recycling Machinery BV     based in Appingedam, NETHERLANDS

Optimizing output in terms of economic value against the lowest possible costs per tonne. This is the short-term goal for every installation that Bollegraaf provides. The long-term goal is to ensure permanently low operating costs and achieve an optimal return on investment.  The better the separation, the higher the value of the output. This is the very essence of our paper & cardboard processing equipment: to increase the quality of the end product. At Bollegraaf, we build and provide high-end turnkey installations that combine a range of effective separation technologies that will improve the quality of the output and its intrinsic value. This will substantially reduce de-inking costs for your clients, the paper mills.

Treatment and dewatering of rejects for pulp and paper industry

by BELLMER KUFFERATH Machinery GmbH     based in Düren, GERMANY

Dewatering rejects to maximum dry contents represents an essential process step both from an economical and ecological viewpoint, especially in waste paper based paper mills but also in pulp mills. The following goals shall be achieved: high heating value for stable and ecological incineration without co-firing, reduction of landfill and transport charges.

Acid Regeneration Process

by Insheng Engineering Co., Ltd     based in Pingtung, TAIWAN

Acid Regeneration Process The commercially most relevant field of application for HCl regeneration processes is the recovery of HCl from waste pickle liquors from carbon steel pickling lines. Other applications include the production of metal oxides such as, but not limited, to Al2O3 and MgO as well as rare earth oxides by pyrohydrolysis of aqueous metal chloride or rare earth chloride solutions. A number of different process routes are available. The most widely used is based on pyrohydrolysis and adiabatic absorption of hydrogen chloride in water, a process invented in the 1960s. However tightening environmental standards and stringent air permit policies render it increasingly difficult to establish new pyrohydrolysis based acid regeneration plants.

Industrial Weighing - Statistical Process and Quality Control

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

Under-filling is illegal! Overfilling does not pay. The quality of industrial filling processes varies from `stable and easy to control` to `high scatter and difficult to control`. METTLER TOLEDO has a suitable SPC or SQC system to ensure systematic monitoring and control of your filling processes, regardless of the difficulty, helping you to maintain process compliance and to control waste through overfilling.

Reliable Shredding Technology for Waste Processing

by UNTHA Shredding Technology     based in Kuchl, AUSTRIA

Our shredders are well suited for a 1-step or 2-step waste recycling. A mechanical-biological waste recycling is usually performed when processing household or commercial waste similar to household waste. The goal of this treatment is to generate a landfill-suited waste material by separating waste fractions with a high calorific value, valuable resources as well as foreign objects. We understand the tough requirements that the shredding technology of a mechanical-biological waste recycling system faces. With our newly engineered XR series we are able to offer the ideal product that meets these tough requirements for both low operating costs and high availability.

Crushing of minerals with Mercodor crushing systems

by MERCODOR GmbH Sondermaschinenbau KG     based in Frankfurt am Main, GERMANY

Due to their hard material structure, the crushing of minerals is a great challenge for the crushing machine. However, the crushing is important for the further processing of the minerals.  The Mercodor crushers are best suitable for the crushing of mudstones and clay bricks, graphite segments, magnesium clinker, but also mineral wool.

Need help finding the right suppliers?

Let the XPRTs do the work for you