oil-containing waste Articles

  • Taking advantage of production waste - Case Study

    Recycling areas: Various scrap Company name: KME (Serravalle Copper Tubes) Located: Serravalle Scrivia (Alessandria), Italy Founded: 1886 Employees: 5700 KME is a leading global fabricator of copper and copper alloy semi-finished products. Each year 405.000 tons of copper and copper alloy semi-finished products (excluding copper wire) are produced. ...


    By Eldan Recycling A/S

  • Waste not, want not

    New CDE sand washing plant produces high-quality building materials from 50-year-old waste in Estonia’s capital,Talinn Estonian company Paekivitoodete Tehase (Limestone Products) have recently purchased a CDE sand washing plant to process a material that had previously been stockpiled as waste because of its high clay content. As a result, this same material is now being sold to the ...


    By CDEnviro

  • Overbands supplied to SB Waste

    Master Magnets Ltd has recently supplied a permanent and an electro Overband Magnet to a major waste recycling company in Wolverhampton known as SB Waste Management & Recycling Ltd. SB Waste Management & Recycling Limited is one of a largest independent skip hire and recycling companies and was established in 1984. They have vast experience in the recycling industry collecting construction and ...


    By Master Magnets Ltd

  • All Waste is not created equal

    If you live in a house, apartment or similar abode, you produce waste. Right? You probably can't go a week without producing waste. All kinds of waste. Call it trash if you want. It's still waste. And if you don't live where recycling is mandatory or there is no outlet for your voluntary environmental tendencies, everything goes into the trash - bottles, cans, cardboard, plastics, bottle caps, ...


  • Waste Generation and Management

    Abstract Reported total waste generation within the EU and the European Free Trade Area increased by nearly 10% between 1990 and 1995, while economic growth was about 6.5% in constant prices. Half the waste comes from the manufacturing industry and construction and demolition activities, while municipal waste, mining waste and waste from other sources each contribute about one sixth of the ...


  • Assessment of major solid wastes generated in palm oil mills

    Two multivariate statistical techniques, viz. Discriminant Analysis (DA) and Principal Components Analysis (PCA) were used for the analysis of amount of solid wastes generated, such as Empty Fruit Bunches (EFB), potash ash, fibre and shell, in five different palm oil mills. DA identified two functions responsible for discriminating the mills on the basis of solid waste generated in these mills. ...


    By Inderscience Publishers

  • High efficiency waste tyre to oil pyrolysis plant, xinxiang huayin

    Company Profile: Waste tyre to oil  pyrolysis plant use the pyrolysis technology which is a recycling technique converting rubber or tyre waste into fuels, monomers, or other valuable materials by thermal and catalytic cracking processes. Huayin renewable energy equipment company has been leading China oil pyrolysis plant field since 1993. Huayin company offers a wide range of ...


  • Toxins Found in E-Waste

    One of the worst effects of a skyrocketing, global e-waste crisis is the risk of toxic contamination for the environment and communities. In fact, delving into the many chemical and heavy metal materials that make up most electronic devices, it seems that toxins and electronics go hand in hand. Though many manufacturers of electronic devices are finding innovative ways to work around toxins found ...

  • Waste Management Overview

    Introduction Our Nation has entered an era in which, as a result of changing world conditions, nuclear weapons production is receiving less attention while the public is expressing increasing concern about protecting human health and preserving the quality of our environment. In response to this national concern, the Department of Energy (DOE) has made waste cleanup and environmental restoration ...

  • Principles of Waste Avoidance and Utilization

    The minimization of wastes requiring disposal is increasingly important as available disposal options become more and more constrained, and particularly as more substances enter everyday use which are not readily decomposed in the natural environment and which can present long term hazards. This note sets out some basic principles for waste minimization in industrial processes, where ...


    By The World Bank

  • Estimation of HAP Emissions from Oil and Gas E&P Operation Wastes

    Wastes generated from oil and gas Exploration and Production (E&P) operations contain chemicals that are considered as toxic air pollutants for the purpose of toxic release inventories (TRI) reports or hazardous air pollutants (HAP) under Title III of the 1990 Clean Air Act Amendments. A study was conducted to estimate HAP emissions from E&P waste management operations on a per-event basis. The ...


    By Trinity Consultants

  • Waste Minimisation Strategy: Monroe Australia

     The company has implemented a major waste minimisation strategy that has enabled it to process liquid waste, reduce water usage, reduce chemical and waste disposal costs, and eliminate pollution. It installed new equipment which treats wastewater to remove emulsified fats and oils, grease, heavy metals and all forms of suspended, colloidal and some dissolved solids. Mains water usage has ...


  • E-waste revolves around 2R

    Electronic equipments are no longer a signature statement of a select few; these are integral part of every one’s life and over a period of time will replace Pen Stand & Writing Pads from the desks of almost all. I wouldn’t be surprised if the pens & pads will be collectors’ items & sold for higher the price then the communication & computation equipments. And ...


    By Eco Recycling Ltd

  • Combustion Of Heavy Fuels And Liquid Wastes

    This paper describes the design and operating conditions of liquid and gas combustors for heavy fuels and liquid wastes. Lower fuel prices can be achieved by switching from light oil to heavy ones, or combining with unconventional waste fuels. Unconventional waste fuels such as energetic off gases and organic liquid waste require especially designed combustion equipment like a special combustor ...

  • Waste Minimisation Strategies: Halls of Residence

     The University of Wollongong (UOW) has six accommodation sites - four Halls of Residence and two Colleges. Waste minimisation strategies have been introduced by the Four Halls of Residence to comply with their commitment to the aims and outcomes of the NSW Waste Minimisation and Management Act 1995 to reduce waste to landfill to 60% by the year 2000. By focusing on the kitchen waste stream, ...


  • Denmark’s Near-Zero-Waste Wonder

    Has this Danish community found the formula for environmentally friendly industry? When we look closely at systems in nature — coral reefs or rainforests, for instance — we see something we don’t often see in human systems: mutually beneficial relationships and energy flows among the various elements, such as air, water, rocks, soil, and plant and animal life. If we ...


    By Ensia

  • Case study - Olive mill waste water treatment

    The production of olive oil generates two kind of waste waters: RINSING WATERS: the quantity is subject to change. It can be re-circulated, after the settling to remove the solids, or discharged directly. SLUDGE: vegetation water with additional water, whose quantity is subject to change. In case of traditional oil mills, the hot additional water flows to the inlet of the centrifuge. Part ...


    By EVALED-Evaporator

  • How Food Waste Costs Our Cities Millions

    It would take farm land the size of Mexico just to grow the amount of food that humans produce, but do not eat, every year. More food goes uneaten at the consumption phase of the supply chain—in places like homes, restaurants and cafeterias—than at any other stage. Almost all urban areas experience high levels of food waste—food that is fit for consumption when it reaches ...


    By GLOBE SERIES

  • Closing the Waste Loops: Australian Newsprint Mills

     The manufacture of newsprint is a process which generates both solid and liquid wastes. Australian Newsprint Mills Ltd Albury has given increasing attention to waste issues in recent years and has succeeded in closing or partially closing some of the ëwaste loopsí, especially in the areas of waste paper recycling, waste water, and solid waste. Background Australian ...


  • Investigation of benefit of using coal wastes in cement production

    Waste disposal in coal preparation plants leads to serious environmental problems. These wastes usually contain about 20% carbon, and the composition of the remaining ash is similar to clay. Addition of these wastes to cement clinker raw material utilises carbon as a source of energy. In this investigation, the effect of addition of these waste materials to the raw materials used in cement ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you