waste processing industry Articles

  • Plasma Methods for Technology Processing of Toxical Industrial Wastes

    Experimental study of thermal neutralization of some toxic chlorine and bromine industrial wastes, as well as of pesticides with a expired term of validity was carried out in the three-jet plasma reactor . Different physical-chemical methods were used for analysis of products of waste processing. It was shown that plasma technology provides effective processing of toxic ...


  • Waste to energy – processing waste with a high thermal value to substitute combustibles

    With the taking effect of the TASi (Technical Regulations on Estate Waste) in 2005, non-treated waste must no longer be disposed of and deposited. Commercial and industrial residues with a high thermal value such as rejects from paper industry, punchings from rubber and plastics, and other mono-fractions which are characterized by homogeneity and constant combustible properties through mechanical ...


  • Utilization of kaolin processing waste for the production of porous ceramic bodies

    The kaolin processing industry generates large amounts of waste in producing countries such as Brazil. The aim of this study was to characterize kaolin processing waste and evaluate its suitability as an alternative ceramic raw material for the production of porous technical ceramic bodies. The waste material was physically and chemically characterized and its thermal behaviour is described. ...


    By SAGE Publications

  • Assessment of industrial by–product synergies from process engineering and sustainability principles

    Industrial synergy has long been one of the applications of industrial ecology; popularised in the 1980's. Industrial synergy increases the interaction between industries through the utilisation of wastes/by–products, thereby offering a closed–loop system. A target application for industrial synergy is Primary industry which generates a huge amount of waste. Historically however, most existing ...


    By Inderscience Publishers

  • Automatic waste wood processing in the production of kitchen worktops case study

    Nolte Küchen GmbH & Co.KG, an established kitchen manufacturer with its registered office in Löhne has commissioned a new production plant for the manufacture of kitchen worktops at their location in Melle early in 2008.The company uses shredders from WEIMA Maschinenbau GmbH in Ilsfeld for processing waste wood accumulating from the manufacturing process in the highly-automated ...


    By WEIMA

  • Waste in the Netherlands

    Household waste More than 10% of waste arisings in the Netherlands consists of household waste. The local authorities are responsible for collecting this category of waste. A set of rules compels the local authorities to collect separately organic household waste, glass, paper and board, textiles and small chemical waste. The policy aims at giving producers more responsibility for their products ...


  • Quality means money in shredding C&D and Industrial waste for RDF production

    A typical challenge in turning Construction and Demolition waste (C&D) and Industrial waste into high grade Refuse-Derived Fuel (RDF) is that elastic and stringy materials wrap around the rotor of the shredder. This causes hours of maintenance downtime weekly and has immediate effect on productivity. When using TANA Shark this has not been an issue for our customer Ekokem-TSJ Yrityspalvelut ...


    By Tana Oy

  • Wood waste product

    A landfill needed a way to reduce their waste stream volume, increase the life of their landfill, and recover a recyclable, marketable product. Wood and yard waste material comprise up to 20% of their entire waste stream volume. Processing and recycling this material will extend the life of the landfill by 20 years. They chose WSM's Model 4864BH Horizontal Hogging System with a customized feed ...

  • All Waste is not created equal

    If you live in a house, apartment or similar abode, you produce waste. Right? You probably can't go a week without producing waste. All kinds of waste. Call it trash if you want. It's still waste. And if you don't live where recycling is mandatory or there is no outlet for your voluntary environmental tendencies, everything goes into the trash - bottles, cans, cardboard, plastics, bottle caps, ...


  • How to Recycle Waste Pallets?

    In one or the other form, almost everyone has pallets. These are highly important in logistics and warehousing industry. Pallets make transportation and storage of good safe. But the problem comes when these pallets break or are out of use. All of sudden the effective material turns into a problem. What if you can turn this waste into a saleable product and can earn profits? Yes it is possible. ...


    By Jay Khodiyar Machine Tools

  • Principles of Waste Avoidance and Utilization

    The minimization of wastes requiring disposal is increasingly important as available disposal options become more and more constrained, and particularly as more substances enter everyday use which are not readily decomposed in the natural environment and which can present long term hazards. This note sets out some basic principles for waste minimization in industrial processes, where ...


    By The World Bank

  • Designed for a Challenge – New Dow Product Line Helps Maximize Industrial Water Recovery, Minimize Waste

    Cost of water on the front end and discharge fees on the other end are squeezing industrial water users. Increasing water efficiency is a clear solution but facilities reusing and recycling must now treat water that is more fouled and more expensive to treat. To help alleviate these challenges in the market, Dow Water & Process Solutions, a business unit of The Dow Chemical Company (NYSE: ...

  • E-waste problem: beyond CSR

    A lot has been talked about the problems associated with the end of life electrical & electronic equipment or (e-waste). Now, the time has come to aggressively implement effective and environment friendly solution to address this ever growing problem. As we all know, that e-waste has unique combination of hazardous substances and reusable commodities and therefore it is important from ...


    By Eco Recycling Ltd

  • Denmark’s Near-Zero-Waste Wonder

    Has this Danish community found the formula for environmentally friendly industry? When we look closely at systems in nature — coral reefs or rainforests, for instance — we see something we don’t often see in human systems: mutually beneficial relationships and energy flows among the various elements, such as air, water, rocks, soil, and plant and animal life. If we ...


    By Ensia

  • Solidification / Immobilisation of sludge from physical-chemical WWT process

    In 2003 econ received an inquiry from a service company operating an industrial waste water treatment plant. At the end of the physical-chemical WWT process this client generated metal-hydroxide sludge from his chamber filter presses. Originally he discharged the sludge into skips and brought it to a hazardous waste landfill. At this landfill, a solidification process was used to stabilise ...


    By econ industries GmbH

  • Processing Wastewater through Reed Beds: BHP Steel Long Products Division

     In the semi-arid region surrounding Whyalla in South Australia, BHP is creating an artificial wetland that promises to make its effluent cleaner than its input water. The wetland is projected to cost around 40% of a conventional treatment works, with significantly less operating costs. The project will conserve one of the most precious resources in the world’s driest country - water - and ...


  • The current situation of solid waste management in China

    With economic development, the quantity of solid waste is increasing rapidly in China; the total quantities of municipal solid waste (MSW), industrial solid waste (ISW), and hazardous waste (HW) in 2002 were 136.5 million tons, 945 million tons, and 10 million tons, respectively. In 2002, the quantity of MSW disposed of was 74.04 million tons, 89.30% of which was landfilled, 3.72% was ...


    By Springer

  • Closing the Waste Loops: Australian Newsprint Mills

     The manufacture of newsprint is a process which generates both solid and liquid wastes. Australian Newsprint Mills Ltd Albury has given increasing attention to waste issues in recent years and has succeeded in closing or partially closing some of the ëwaste loopsí, especially in the areas of waste paper recycling, waste water, and solid waste. Background Australian ...


  • Minimising Waste in Metal Galvanising: Korvest Galvanisers

     The implementation of a waste minimisation strategy at Korvest Galvanisers has immediately improved the company's 'bottom line', and made it more competitive. Employee training on waste minimisation has led to an improvement in processing and product quality. Cost savings from changes to work practices are estimated at around $100,000 per annum. Background Korvest ...


  • Turn Waste Materials Into Useful Products With Briquetting Machines

    In today’s world, any approach that aims towards reducing pollution through renewable energy must be appreciated. The use of Briquetting machines is such an approach. The fate of fossil fuel is well known, and their resources are fast getting depleted from all corners of the world. Thus, ways to exploit alternative energy resources that are renewable and lessen our dependence on fossil ...


    By Jay Khodiyar Machine Tools

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you