waste production Articles

  • Wood waste product

    A landfill needed a way to reduce their waste stream volume, increase the life of their landfill, and recover a recyclable, marketable product. Wood and yard waste material comprise up to 20% of their entire waste stream volume. Processing and recycling this material will extend the life of the landfill by 20 years. They chose WSM's Model 4864BH Horizontal Hogging System with a customized feed ...

  • Well suited for dust and waste products from airlaid production

    Less dust, easier handling and reduced transport costs. The RUNI Screw Compactor represents a great advance in airlaid production waste management. Dan-Web in Aarhus produces machinery and equipment for the manufacture of airlaid products such as nappies, sanitary towels, bed sheets and meat pads – primarily as turn-key production systems. The company has its own pilot system for client ...


    By Runi A/S

  • Automotive Shredder Residue (ASR) - From Waste to Products

    The paper will explain WESA-SLF, a dry-mechanical process to treat ASR with the aim to achieve usable products, mainly organic materials, metals, and minerals. Detail information will be given about the first plant for processing 4 tons per hour ASR which had its start up end of 1999. The experience with the first months in operation as well as with the quality of the products and the influence ...

  • Composite construction products from waste tyres

    The construction industry consumes approximately 420 million tonnes of products per year, and therefore utilises large quantities of raw materials. Alternatives to primary materials in construction products are already widely used; examples include the use of construction and demolition wastes as aggregates, timber wastes in composite board products and by-products from steel-making in the ...

  • Taking advantage of production waste - Case Study

    Recycling areas: Various scrap Company name: KME (Serravalle Copper Tubes) Located: Serravalle Scrivia (Alessandria), Italy Founded: 1886 Employees: 5700 KME is a leading global fabricator of copper and copper alloy semi-finished products. Each year 405.000 tons of copper and copper alloy semi-finished products (excluding copper wire) are produced. ...


    By Eldan Recycling A/S

  • Turn Waste Materials Into Useful Products With Briquetting Machines

    In today’s world, any approach that aims towards reducing pollution through renewable energy must be appreciated. The use of Briquetting machines is such an approach. The fate of fossil fuel is well known, and their resources are fast getting depleted from all corners of the world. Thus, ways to exploit alternative energy resources that are renewable and lessen our dependence on fossil ...


    By Jay Khodiyar Machine Tools

  • Garbage to Gold: Breakthrough Technology Uses Plasma to Convert Waste to Useable Products

    A breakthrough technology that uses high-temperature thermal plasma to turn household garbage into a renewable energy source, scrap metal and mineral wool is attracting worldwide attention for Huntsville-based Plasma Waste Recycling. […]  The PWR process doesn"t involve combustion, but a gasification process that is ...


  • Oceans apart: Comparative liability standards on when a product becomes a waste

    In the last year the highest courts in Europe and the United States have reached divergent results on the scope of liability of a producer whose product ends up becoming a “waste” by the actions of a third-party. One court held that a producer is not responsible for the third-party actions resulting in contamination unless the disposal was part of the arrangement between them. The other held that ...


  • Biotechnological Production of 2,3-Butaneidol From Agroindustrial Food Wastes

    As a part of a research program on the exploitation of common agroindustrial wastes to obtain products of high added value by microbial processes, this study investigates 2,3-butanediol production by Enterobacter aerogenes in a stirred batch reactor under micro-aerobic conditions. After the optimal operating conditions have been selected (pH, temperature, starting sugar concentration) using a ...


  • On the pre–treatment of municipal organic waste towards fuel production: a review

    Lignocelluloses are the main constituents of municipal organic waste (MOW). In order to increase the production of fuels, via fermentations, the enzymatic hydrolysis is the first step towards a valorisation process. It is well–known that the hydrolysis of lignocelluloses is not very effective because of the high stability of the constituents. In this respect the pre–treatment of MOW is necessary ...


    By Inderscience Publishers

  • Recycling and use of wastes/co-products from the iron/steel and alumina industries

    The current and potential uses for Blast Furnace (BF) slag, steel slag and red mud, and their environmental implications, are outlined and discussed as are the difficulties associated with red mud disposal and subsequent rehabilitation of the disposal sites. Whilst practicable bulk uses for the large amounts of slags that are produced have been found, the uses for red mud are limited and only ...


    By Inderscience Publishers

  • Anaerobic fermentation of organic solid wastes: volatile fatty acid production and separation

    Anaerobic fermentation of organic municipal solid waste was investigated using a leach-bed reactor (LBR) to assess the volatile fatty acid (VFA) production efficiency. The leachate recycle rate in the LBR affected the VFA composition of the leachate. A six-fold increase in the recycle rate resulted in an increase of the acetic acid fraction of leachate from 24.7 to 43.0%. The separation ...


    By IWA Publishing

  • Reverse logistics in effective recovery of products from waste materials

    Technical solutions for the recovery of products from waste materials become more and more available. To have these new technologies implemented in a real world, a feasibility study is indispensable. For this purpose, it is often imperative to adopt the viewpoint of an individual firm and ask whether it would be wise to engage in product recovery activities or not. Aspects of economics and ...


    By Springer

  • Lean product development - enabling management factors for waste elimination

    Lean development is a promising approach in new product development (NPD). However, despite the successful application of lean thinking and its principles to manufacturing, the adoption of the lean approach to product development is a quite novel undertaking. In this paper, we develop and test hypotheses pertaining to the elimination of waste, which is one of the major objectives of lean ...


    By Inderscience Publishers

  • Utilization of kaolin processing waste for the production of porous ceramic bodies

    The kaolin processing industry generates large amounts of waste in producing countries such as Brazil. The aim of this study was to characterize kaolin processing waste and evaluate its suitability as an alternative ceramic raw material for the production of porous technical ceramic bodies. The waste material was physically and chemically characterized and its thermal behaviour is described. ...


    By SAGE Publications

  • Potential of hydrogen production from organic Urban Solid Waste fermentation in Mexico

    Mexico generated 35.4 million tons of urban solid wastes in 2005 of which 51% were organic ones. This biomass can be fermented into H2 when H2-based technologies increase their market penetration for the year 2020. The purpose of this work was to review studies that have utilised organic solid wastes for fermentative H2 production and to evaluate the potential for Mexico. The experimental H2 ...


    By Inderscience Publishers

  • From Waste in Anodising Plant to New Chemical Product in Sewage Treatment Plants

    Aluminium containing caustic soda used as a pickling agent in the pre-treatment of aluminium before anodising and aluminium containing sulphuric acids used as electrolytes for the formation of oxide layers in anodising plants can be utilised in municipal sewage treatment plants to reduce phosphates and improve precipitation. From the anodiser's point of view, these products are spent once they ...


  • MPPE Systems for waste water (Resin production) USA case study

    Akzo Nobel, Total plants Waste water treatment 5 m3/hr (20 gpm) Aromatics (BTEX) 200,000 --> 20 ppb 99.99% removal Performance guaranteed Vs. steamstripper lower costs 50%, trouble free, higher capacity (4x), less space (1/3) ...

  • Quality means money in shredding C&D and Industrial waste for RDF production

    A typical challenge in turning Construction and Demolition waste (C&D) and Industrial waste into high grade Refuse-Derived Fuel (RDF) is that elastic and stringy materials wrap around the rotor of the shredder. This causes hours of maintenance downtime weekly and has immediate effect on productivity. When using TANA Shark this has not been an issue for our customer Ekokem-TSJ Yrityspalvelut ...


    By Tana Oy

  • Optimization of VFAs and ethanol production with waste sludge used as the denitrification carbon source

    An acidification metabolite such as volatile fatty acids (VFAs) and ethanol could be used as denitrification carbon sources for solving the difficult problem of carbon source shortages and low nitrogen removal efficiency. A proper control of environmental factors could be essential for obtaining the optimal contents of VFAs and ethanol. In this study, suspended solids (SS), oxidation reduction ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you