Waste Recovery Equipment For Waste And Recycling Available In Nova Scotia
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
Complete Turnkey Systems, custom designed and manufactured by Shred-Tech, destroy, recover and separate a wide variety of off-spec, mis-packaged and out-dated ...
-
PremiumManufactured by AMS, Inc.based in USA
The PowerCoreTM 9400 allows you to limit the number of employees needed on site. This asphalt & concrete coring system provides a convenient, cost-effective method for retrieving a sample of concrete or asphalt for materials tests, or to collect soil samples from below the pavement. Rather than having to remove large sections of the concrete or asphalt, simply core a small-diameter hole. Then ...
-
PremiumManufactured by AMS, Inc.based in USA
The PowerCoreTM 9410 allows you to limit the number of employees needed on site. Each model is set up with our standard direct push capability by using a 200 ft-lb. hydraulic hammer along with a 2400 ft-lb. hydraulic core motor that can core through concrete and asphalt to allow access for the collection of intact continuous soil cores. The PowerCoreTM 9410 model has all the same features and ...
-
PremiumManufactured by Presona ABbased in SWEDEN
Presona offers the total solution for rational and effective handling of production waste from the graphic industry, from paper and cardboard manufacturers and from the packaging industry. The Presona waste extraction plant always builds on the same principle. Each specific plant is customized with respect to required air and material flow capacity, number of suction points etc. We offer the ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
The highly efficient UT-M is a three-pass boiler designed for 750 to 19,200 kW of heating at up to 16 bar. Its various output sizes and temperature ranges up to 190 °C enable flexible operation for countless process heat and heating ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The APU Acid Purification Unit is used to continuously remove dissolved metals from process acids to maintain a consistently low level of contaminants. The APU is employed in aluminum anodizing and copper refining operations to purify hydrochloric, acetic, nitric, phosphoric, and sulfuric acids, reducing acid purchase frequency and costs and improving overall process ...
-
Manufactured by Jiangsu Dongfang Hydraulic Co., Ltdbased in CHINA
Horizontal cardboard balers bale and belt of loose materials like waste paper (cardboard, newspaper), plastic scraps (PET bottle, plastic film or crates) & straw, etc.Horizontal structure; Feeding can be manual or automatic with conveyor.PLC control, push-button operation, safe & ...
-
Manufactured by Next Advance, Inc.based in USA
The BlotBot® 248V is a new Freedom Rocker™ automated blot processor. Using your same protocols, it automates the handling of blots and gels. With microprocessor control, it provides consistent processing conditions. The BlotBot will incubate/stain and wash your blots/gels during meetings, overnight, or even over a weekend, so your blots will be ready sooner for downstream analysis. ...
-
Manufactured by Barradas GmbHbased in GERMANY
SUSTAINABLE, ENERGY-SAVING AND INDIVIDUAL SOLUTIONS IN REFRIGERATOR RECYCLING: In the field of ELF recycling, we focus on a sustainable, individually adaptable shredding concept, with which the shredding of refrigeration equipment can be realized in an energy-saving ...
-
Manufactured by Zhejiang Tuna Environmental Science & Technology Co., Ltd.based in CHINA
I Flue gas waste-heat recovery low-low temperature saving coal ESP technology. It is the technology to place the heat exchanger (MGGH) after boiler air pre-heater and before the inlet of electric precipitator. By leading condensate water to MGGH, we can make it heat exchanging with hot flue gas from boiler. By doing this, the running temperature can be dropped to around 90 ~ 100℃. It can ...
-
Manufactured by Oil Skimmers, Inc.based in USA
The Oil Skimmers Model 5H is designed for efficient oil removal in areas where the unit can be located within 3 feet of the water level. The “H” stand for “horizontal” in that the tube operates horizontally. This unit is used for above-ground tanks, parts washers, and other applications where the skimmer can remain within 3 feet of the skimming area. Also similar to our ...
-
Manufactured by Suny Group | Zhengzhou Zhengyang Machinery Equipment Co., Ltd.based in CHINA
"me means of recycling waste tire is that separate the inner steel wire and fibre from waste tire through all kinds of technology and granulate the rubber block into powder. Tyre Recycling Machine is suitable to international development and management way. It merit on that can recovery the waste tire to rubber reaching to the availability 100% and use the rubber in ...
-
Manufactured by Harris Waste Management Group, Incbased in USA
The Gorilla Doesn’t Monkey Around: The Harris Gorilla is designed specifically for all ranges of customers from small to large production facilities. The Gorilla’s flexibility makes it an ideal two ram baler for anyone looking to move to a two ...
-
Manufactured by Shijiazhuang Jiarun Technology Co., Ltdbased in CHINA
We mainly manufacture Eddy Current Separator, Metal crusher machine. All the accessories are available. Jiarun has established a set of manufacturing to service from the perfect system. Each machine has protected by our own patent application. We have also open up a branch company. The facility have been exported to many countries ...
-
Manufactured by Chomp Incbased in USA
Waste recovery: 185-4,500 tons/year. Our Core system is an ideal solution for food manufacturers, utilities, and larger scale organizations that want to reduce emissions while generating a return on investment. Starting at $600,000 (before tax ...
-
Manufactured by FGM Srlbased in ITALY
The vertical scrubber with triple separate counter-current washing stage was created to reconcile in a single device the need to purify streams of air polluted by both dust and malodorous gases (deodorization). In fact, this equipment is equivalent to the sum of a Venturi Jet Scrubber, a separate two-stage Scrubber, all concentrated in a single equipment which will take up considerably less ...
-
Manufactured by Industrial Magnetics, Inc. (IMI)based in USA
Our comprehensive line of powerful permanent Magnetic Separation Pulleys are typically installed as head pulleys in conveyor system applications to improve product purity and protect equipment from metal damage. They provide effective, automatic and continuous removal of tramp metal from a material ...
-
Manufactured by Walle Industrybased in CHINA
Eddy current separation is an effective non-ferrous metal recovery method. It has the advantages of excellent separation effect, strong adaptability, reliable mechanical structure, light structural weight, strong repulsion (adjustable), high separation efficiency and large treatment capacity. It can separate some non-ferrous metals from electronic waste. It is mainly used to separate copper, ...
-
Manufactured by Hangzhou Dry Air Treatment Equipment Co., Ltdbased in CHINA
After pretreatment of filtering and cooling, the organic waste gas with middle and high concentration enters the first-stage rotor and the second-stage rotor for adsorption and concentration. By now we will get clean gas which can be discharged by standard through the chimney. The high-concentration desorbed gas generated by the rotor enters the drying tank to completely remove the moisture after ...
-
Manufactured by Cire Technologies, Inc.based in USA
Cire Technologies can supply a range of RTOs to match your process requirements. From two bed, to the three bed design in the adjacent picture, up to multiple ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you