Waste Recovery Equipment For Waste And Recycling Available In Palau
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
Complete Turnkey Systems, custom designed and manufactured by Shred-Tech, destroy, recover and separate a wide variety of off-spec, mis-packaged and out-dated ...
-
PremiumManufactured by Bosch Industriekessel GmbH - Industrial Boilersbased in GERMANY
The highly efficient UT-M is a three-pass boiler designed for 750 to 19,200 kW of heating at up to 16 bar. Its various output sizes and temperature ranges up to 190 °C enable flexible operation for countless process heat and heating ...
-
PremiumManufactured by AMS, Inc.based in USA
The PowerCoreTM 9410 allows you to limit the number of employees needed on site. Each model is set up with our standard direct push capability by using a 200 ft-lb. hydraulic hammer along with a 2400 ft-lb. hydraulic core motor that can core through concrete and asphalt to allow access for the collection of intact continuous soil cores. The PowerCoreTM 9410 model has all the same features and ...
-
PremiumManufactured by Presona ABbased in SWEDEN
Presona offers the total solution for rational and effective handling of production waste from the graphic industry, from paper and cardboard manufacturers and from the packaging industry. The Presona waste extraction plant always builds on the same principle. Each specific plant is customized with respect to required air and material flow capacity, number of suction points etc. We offer the ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The APU Acid Purification Unit is used to continuously remove dissolved metals from process acids to maintain a consistently low level of contaminants. The APU is employed in aluminum anodizing and copper refining operations to purify hydrochloric, acetic, nitric, phosphoric, and sulfuric acids, reducing acid purchase frequency and costs and improving overall process ...
-
PremiumManufactured by AMS, Inc.based in USA
The PowerCoreTM 9400 allows you to limit the number of employees needed on site. This asphalt & concrete coring system provides a convenient, cost-effective method for retrieving a sample of concrete or asphalt for materials tests, or to collect soil samples from below the pavement. Rather than having to remove large sections of the concrete or asphalt, simply core a small-diameter hole. Then ...
-
Manufactured by UNIHA Wasser Technologie GmbHbased in AUSTRIA
Waste water treatment involves removal or recovery of waste water constituents harmful to any specific point of disposal and to the environment in general. Domestic, community and many sorts of industrial waste water are treated by biological purification processes, whereas many other industrial wastes need to be purified by physical/chemical treatment methods. For biological treatment processes, ...
-
Manufactured by Suny Group | Zhengzhou Zhengyang Machinery Equipment Co., Ltd.based in CHINA
"me means of recycling waste tire is that separate the inner steel wire and fibre from waste tire through all kinds of technology and granulate the rubber block into powder. Tyre Recycling Machine is suitable to international development and management way. It merit on that can recovery the waste tire to rubber reaching to the availability 100% and use the rubber in ...
-
Manufactured by Oil Skimmers, Inc.based in USA
The Oil Skimmers Model 5H is designed for efficient oil removal in areas where the unit can be located within 3 feet of the water level. The “H” stand for “horizontal” in that the tube operates horizontally. This unit is used for above-ground tanks, parts washers, and other applications where the skimmer can remain within 3 feet of the skimming area. Also similar to our ...
-
Manufactured by Orbinoxbased in SPAIN
Regulating or isolating round butterfly damper. Normally with one single disc on a central shaft and optionally with multiple interconnected blades. Available with pneumatic, electric, hydraulic or manual ...
-
Manufactured by Orbinoxbased in SPAIN
3 way damper with one inlet and 2 outlets. Each outlet port has a butterfly or louvre damper, normally mechanically interlocked, so that as one port opens the other closes.The 3 way damper can control, distribute or isolate gas flow.Available with pneumatic, electric, hydraulic or manual actuator.Depending on the sealing system, varying levels of tightness can be obtained (95% -100 %).Suitable ...
-
Manufactured by Harris Waste Management Group, Incbased in USA
The Gorilla Doesn’t Monkey Around: The Harris Gorilla is designed specifically for all ranges of customers from small to large production facilities. The Gorilla’s flexibility makes it an ideal two ram baler for anyone looking to move to a two ...
-
Manufactured by Walle Industrybased in CHINA
Eddy current separation is an effective non-ferrous metal recovery method. It has the advantages of excellent separation effect, strong adaptability, reliable mechanical structure, light structural weight, strong repulsion (adjustable), high separation efficiency and large treatment capacity. It can separate some non-ferrous metals from electronic waste. It is mainly used to separate copper, ...
-
Manufactured by FGM Srlbased in ITALY
The vertical scrubber with triple separate counter-current washing stage was created to reconcile in a single device the need to purify streams of air polluted by both dust and malodorous gases (deodorization). In fact, this equipment is equivalent to the sum of a Venturi Jet Scrubber, a separate two-stage Scrubber, all concentrated in a single equipment which will take up considerably less ...
-
Manufactured by Shijiazhuang Jiarun Technology Co., Ltdbased in CHINA
We mainly manufacture Eddy Current Separator, Metal crusher machine. All the accessories are available. Jiarun has established a set of manufacturing to service from the perfect system. Each machine has protected by our own patent application. We have also open up a branch company. The facility have been exported to many countries ...
-
Manufactured by Barradas GmbHbased in GERMANY
SUSTAINABLE, ENERGY-SAVING AND INDIVIDUAL SOLUTIONS IN REFRIGERATOR RECYCLING: In the field of ELF recycling, we focus on a sustainable, individually adaptable shredding concept, with which the shredding of refrigeration equipment can be realized in an energy-saving ...
-
Manufactured by Jiangsu Dongfang Hydraulic Co., Ltdbased in CHINA
Horizontal cardboard balers bale and belt of loose materials like waste paper (cardboard, newspaper), plastic scraps (PET bottle, plastic film or crates) & straw, etc.Horizontal structure; Feeding can be manual or automatic with conveyor.PLC control, push-button operation, safe & ...
-
Manufactured by Next Advance, Inc.based in USA
The BlotBot® 248V is a new Freedom Rocker™ automated blot processor. Using your same protocols, it automates the handling of blots and gels. With microprocessor control, it provides consistent processing conditions. The BlotBot will incubate/stain and wash your blots/gels during meetings, overnight, or even over a weekend, so your blots will be ready sooner for downstream analysis. ...
-
Manufactured by Gemco Energybased in CHINA
GEMCO provides a complete turnkey solution for tyre pyrolysis projects, achieving resource utilization, harmless treatment, and reduced disposal of waste tyres in a safe, environmentally friendly, and continuous way. Tyre pyrolysis involves subjecting waste tyres to a process where their organic components are cracked in anaerobic or oxygen-deficient conditions at an appropriate temperature. This ...
-
Manufactured by Shijiazhuang Jiarun Technology Co., Ltdbased in CHINA
An Scrap Metal Recycling Equipment(also called ECS, Non-ferrous Metal separator) is a machine that’s use powerful rare earth magnets to sort and separate non-ferrous metals(such as Copper, Aluminum, Zinc, Gold, Silver, etc) from mixed wasted and other product stream automatically. This newly researched machine can sort out various of different size waste material. You can reduce labor ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you