Waste Removal Equipment For Waste And Recycling Near Marshall Islands
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
Hydroflux HySmart Sequencing Batch Reactor. SBR’s are renowned as being one of the most robust and reliable biological systems available for Industrial wastewater treatment including: Minimal Footprint. No Clarifier Required. Ability to Cope with Shock Loadings. No Sludge Recycling Necessary. Biological Nutrient Removal (BN.R) ...
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
The HeadMax hydraulic suction system is designed for sludge removal in activated sludge treatment with partial or complete nitrification processes. It allows for the construction of a flat floor which saves on civil costs associated with the clarifier ...
-
Manufactured by Filquip Pty Limitedbased in AUSTRALIA
ilquip can design, specify and provide vacuum conveying systems to move product from trucks, bulk bags, hoppers or silos to any location. Filquip can also provide industrial vacuum systems to move product from suction heads to bins or bags for simple waste ...
-
Manufactured by SnowPure Water Technologiesbased in USA
Electrodialysis (ED) & Electrodialysis Reversal (EDR) are used around the globe in many industrial, laboratory and recycling environments. ED is an industrial membrane separation process in which ions are transported through ion-permeable membranes, from one stream to another, under the influence of a voltage potential gradient. The electrical charges on the ions allow them to be driven ...
-
Manufactured by Delitek ASbased in NORWAY
The choice of disposer size is determined based upon type and the volume of food waste or number of persons per meal. A higher motor power and larger grinding unit allows for, besides increased grinding power, also increased pumping and transport capacity of the grounded food waste through the water trap and into draining pipe. A larger model should be chosen if the disposer is expected to run ...
-
Manufactured by Novozymes A/Sbased in DENMARK
BioRemove™ FOG Boost is a blend of microbes with enzymes added to accelerate reaction times. The result is extra-fast degradation of fats, oil and grease (FOG). It's designed for municipal waste treatment systems and suitable for use from system start-up. By improving FOG degradation, BioRemove™ FOG Boost can also improve FOG capacity. If your plant charges tipping fees, this can ...
-
Manufactured by Novozymes A/Sbased in DENMARK
BioRemove™ FOG degrades fats, oils and grease (FOG) quickly and completely. The robust microorganisms in this blend thrive in a wide range of plants and applications including system start-up. With BioRemove™ FOG, you can cut the time, effort and costs associated with FOG and their ...
-
Distributed by Taylor Purificationbased in NEW ZEALAND
The nature of distilled water in the human body is a solvent, which dissolves solid food. It helps the body to digest food and carry the nourishment to each cell. The distilled water also dissolves the cell's waste. Therefore, it removes the poisonous substance and inorganic mineral matter from the human ...
-
Manufactured by VoR Environmentalbased in AUSTRALIA
Rotoscreen is a fine-bar screening device for fully-automated removal of coarse solids from municipal and industrial waste water. The working principle is ingeniously simple, using rows of self cleaning screening bars in a staircase configuration. Every other bar is fixed and the remaining ones are part of a movable fixture which revolves upward to deposit screenings on the next 'step' up, ...
-
Manufactured by Onslow Engineering Pty Ltd.based in AUSTRALIA
Container only removed for emptying . 8.5 cubic metre to 25 cubic metre. Suitable for non liquid products. Option of 240 or 660 cart lifters. Complete with safety guarding and safety ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The Enviroquip rapid sludge removal clarifier is unlike any other clarifier. Sludge is drawn from the floor using straight tubes, going directly into SludgeViewr troughs, which display the amount of sludge return from each tube. Furthermore, Ovivo's ScumTrappR influent well captures 95% of the floatables, eliminating the need for scum to travel the full surface of the clarifier, and our exclusive ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The Ovivo suction header clarifier is designed mainly for municipal wastewater treatment applications. It features rapid sludge removal by suction. Maximizing sludge concentration, providing low effluent suspended solids and efficient scum removal, this clarifier model is well adapted for primary and secondary clarification process. It can be offered as a bridge or column supported clarifier ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The Ovivo suction pipe clarifier is designed for municipal wastewater treatment applications. It features rapid sludge removal by suction, using 'organ' pipes instead of a suction duct as in the Ovivo suction header clarifier model. Maximizing sludge concentration, providing low effluent suspended solids and efficient scum removal, this clarifier model is well adapted for primary and secondary ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The Ovivo spiral blade scraper clarifier is designed for municipal wastewater, municipal drinking water and industrial wastewater treatment applications. It features rapid sludge removal by the action of spiral raking blades. Maximizing sludge concentration, providing low effluent suspended solids and efficient scum removal, this clarifier model is well adapted for primary and secondary ...
-
based in SOUTH KOREA
DAF uses dissolved air for producing micro and/or nano bubbles. Air and water are compressed into a confined container at the same time, of which name is ADT, Air Dissolving Tank, or Air saturator in 4~6Kg/cm2. Generated micro bubbles separate SS, oil, surfactants, flocs, and algae from water by flotation. ...
-
Manufactured by Hankook Matics Co.,Ltd (HKM)based in SOUTH KOREA
A superconducting magnet is a future model of the magnet of the copper and aluminum coil in ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This pollution control system was built to capture and clean the gases generated from burning a mixture of medical waste (primarily soiled bandages). Suitable solution for most most medical processes (dependent on waste stream and ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This is one of the largest PCS systems we have developed. Capable of handling in excess of 1000kg per hour (FLOW RATE INSTEAD???), this unit features a large filter array and additional heat exchanger to reduce gas temperatures to the required levels for ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
This pollution control system was designed to capture all the gases, soot and entrained solids emitted by the incinerator while burning a low plastic content RDF mix and process it to meet the European regulations, which are set out in directive 2000/76/EC, dated 4th Dec 2000. Suitable for most small scale industrial ...
-
Manufactured by Ansco Engineering Ltd.based in NEW ZEALAND
Mechanical filter system for solids removal in waste water. Moving plates create filter grid which traps solids. Stepping system moves solids up & out of water flow. Virtually no blocking or clogging- self cleaning. Made to suit different water flow requirements. Stainless steel construction. Electric motor drive- 0.75kw 3ph ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you