Only show results available in Virginia? Ok

Waste Separation Applications

  • Oil Water Separation / Water Treatment - Chemical Reduction

    Adding Wilsa ElectroWaveTM technology to existing separation or water treatment can help reduce or eliminate chemical use. The Wilsa Effect can often take the place of surfactants, demulsifiers, sacle inhibitors and biocides to enhance separation and clarification.

    By Hudson Industries based in Vienna, OHIO (USA).

  • High performance separation system for sour water

    Hydrocarbons in the sour water system are typically present on a continuous basis at up to 10,000 ppm and during upsets to levels greater than 50,000 ppm. As little as 5,000 ppm Cat Naphtha lost to the sour water system from an FCC main fractionator overhead accumulator operating at 100 gpm water represents 262,800 gallons of potential product gasoline lost per year, with a recoverable product value greater than $500,000.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Industrial water Uranium recovery & purification

    The type of Uranium mineralization and the nature of its association within a particular deposit will have a major impact on process route selection. Uranium minerals are classified according to their influence on extractive metallurgy. The presence of impurities such as Vanadium, Molybdenum, and others may dictate that ion exchange is to be employed.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Environmental technology for droplet seperation industry

    As component of the gas scrubbing plants or as single apparatus Körting swirl droplet separators for seperating droplets and recondensates make an essential contribution towards the observation of emission codes and therefore towards the protection of the environment. They are used in gas scrubbing and vacuum plants, for condensate separation in chimney stacks, in evaporating plants as well as for the separation of difficult products (e. g. those with a tendency to polymerisation).

    By Körting Hannover AG based in Hannover, GERMANY.

  • Environmental technology for droplet seperation industry

    As component of the gas scrubbing plants or as single apparatus Körting swirl droplet separators for seperating droplets and recondensates make an essential contribution towards the observation of emission codes and therefore towards the protection of the environment. They are used in gas scrubbing and vacuum plants, for condensate separation in chimney stacks, in evaporating plants as well as for the separation of difficult products (e. g. those with a tendency to polymerisation).

    By Körting Hannover AG based in Hannover, GERMANY.

  • Removal of Non-Ferrous Metals in the Recycling Industry

    Non magnetic metals such aluminum + copper can be separated using eriez eddy current separators or meta sorters. Eriez equipment, either as individual units or complete systems, is designed for efficient + economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Handling hospital waste and laundry

    Large amounts of hazardous waste, contaminated waste and dirty laundry are handled in modern hospitals, and so hygiene and staff safety are important. This is why it is important to find sustainable waste solutions which do not require waste to be physically touched. This is achieved with the Envac vacuum system.

    By Envac AB based in Stockholm, SWEDEN.

  • Slurry treatment from mineral and metallurgical processes

    Bilfinger Water Technologies has designed and realized complete filtration plants in important mineral and metallurgical complexes.

    By Bilfinger Water Technologies GmbH based in Aarbergen, GERMANY.

  • High performance separation system for lube oil industry

    Many lube oil recovery processes create aqueous and hydrocarbon emulsions that are difficult to separate by means of conventional liquid/liquid separations technology. Accomplishing the desired separation requires that these emulsified droplets be captured. Conventional coalescers are unable to provide the degree of brightness and clarity associated with good separation due to the inability to capture and remove the most penetrating droplets that indicate carry-over. Pentair Porous Media technologies have been developed to address the inherent deficiencies of the conventional coalescers.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • High performance filtration & separation system for frac fluid

    Proper fluid and proppant placement are critical to a successful propped fracture stimulation treatment. Despite effective placement of the treatment, well performance is often detrimentally affected by incomplete gel breaking and fluid recovery.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Oil Water Separator for Hydrocarbon Recovery from Flowback, Produced Brinewater

    Hudson Oil Water Separators can be used to reclaim more oil and hydrocarbons from flowback, produced water, brine water or waste water before sending this value stream to disposal/injection sites. To enhance recovery even further package a Hudson Separator with a Wilsa ElectroWaveTM Conditioner for ultimate results. Up to 99.999% of oil and hydrocarbons recovered, including emulsified oils. Please call us today to evaluate your recovery potential.

    By Hudson Industries based in Warren, OHIO (USA).

  • Recirculation systems for filtration

    The appropriate quality of water supplied to a process with a re-circulating system allows for the following:

    • Savings as a result of the amount of water used.
    • Increases the amount of water available.
    • Decreases costs of waste water disposal (and unwanted spills).
    • Maintains a high quality of product.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Alternative Fuel Production for Energy / Substitute Fuel Production for Energy

    Being driven by new legislation, the production of substitute fuel/alternative fuel will be gain momentum in the next few years, as well as the expected increase of recycling rate in municipalities. This means a lot of waste streams can be turned into alternative fuel for the coal fired power plant, cement and lime industry, biomass power plant, or other industrial boiler systems that still burning fossil fuels.

    By eFACTOR3 LLC based in Pineville, NORTH CAROLINA (USA).

  • Recycling of Paper / Recycling of Cardboard

    The recycling of paper and cardboard often requires a shredding process to improve the pulping process or to put more weight into the bale. The M&J Shredder line is very effective for reducing the amount of fines in the shredded product. For small volume applications we also offer the WEIMA Single shaft shredder. In many cases these units are used in smaller paper recycling applications were the material is baled. The benefit of shredding before baling is an increased bale weight, and we also offer separation technology to separate contaminates from the paper stream.

    By eFACTOR3 LLC based in Pineville, NORTH CAROLINA (USA).

  • Industrial Meshes for Fluidization

    Pneumatic conveyors lines for conveying media in powder form are equipped with fluidization media made of GEKUPLATE wire mesh laminates. SolidWEAVE stainless steel media satisfy all the requirements which are critical for fluidization.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Waste recycling systems for refuse derived fuel (RDF)

    Kiverco can design, manufacture and install bespoke Refuse Derived Fuel recycling systems, which will be unique to your own waste recycling specifications. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your RDF recycling plant and its maximum productivity potential.

    By Kiverco Recycling Systems Ltd. based in Dungannon, NORTHERN IRELAND.

  • Waste recycling systems for composting

    Kiverco specialise in the design, manufacture, and installation of compost recycling systems that will be unique to your compost recycling requirements. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your Composting recycling plant and its maximum productivity potential.

    By Kiverco Recycling Systems Ltd. based in Dungannon, NORTHERN IRELAND.

  • Solutions for recovering metals

    The mining industry relies on Calgon Carbon’s Granular Activated Carbon (GAC) to recover gold and other precious metals. Calgon Carbon’s ISEP® Technology is used to recover precious, rare earth and base metals, uranium, copper, nickel and zinc from ore, waste and reclaim streams. Our high-quality activated carbons have been developed and successfully proven to maximize efficiency by reducing the loss of precious metals and the consumption of carbon in three precious metal extraction techniques: Carbon-in-Leach (CIL), Carbon-in-Pulp (CIP) and Carbon-in-Column (CIC). When Ion Exchange is employed for metal recovery in leach and waste streams, Calgon Carbon’s ISEP ® system provides a continuous, consistent and high purity concentrated product while minimizing the use of chemicals, resin and wastes. Calgon Carbon’s continuous ion exchange systems are the most flexible, robust, and accepted in the industry.

    By Calgon Carbon Corporation based in Pittsburgh, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you