Waste Separation Articles

  • Explaining magnetic separators

    What is Magnetic Separation? Magnetic Separation is one of the most common and important physical separation techniques.  The basic concept of a Magnetic Separator is that magnetically susceptible particles or bodies are separated from non-magnetic particles.  However, the simplicity stops there.  To enable different levels of separation from a wide range materials, there ...


    By Master Magnets Ltd

  • Bandar Abbas Project Iran - Case Study

    Customer: Aria Electronics (IRAN) Project Name: Bandar Abbas Pumping Stations Manufacturing year: 2009 Scope of supply 2 pcs. Chain Operated Linear Mechanical Screens for Channels with Dimensions (WxH): 1.300 x ...


    By ASTIM A.S.

  • Montello S.p.A. and TOMRA: when excellence chooses excellence - Case Study

    Montello S.p.A., based near Bergamo, Italy, uses the latest sensor-based technology of 40 TOMRA machines to give a new lease of life to tonnes of post-consumer plastic arriving from Lombardy. Montello S.p.A. Bergamo. A success story. An example of industrial conversion towards a green economy. Back in 1996, at the time of the steel crisis, the company's management decided to discontinue ...


    By TOMRA Sorting GmbH.

  • Sepacore for the Separation of Plant Extracts - Case Study

    Customer: University of Basel, Switzerland The Division of Pharmaceutical Biology at the University of Basel in Switzerland is a center of excellence for natural product and medicinal plant research. It belongs to the Departement of Pharmaceutical Sciences, a leading research and teaching center in drug discovery & development, drug therapy and drug safety. Research groups ...


    By BÜCHI Labortechnik AG

  • Delivering the Promise of Continued Customer Success

    Since TOMRA was founded in 1972, we have continuously redefined what it means to be innovative in the sectors in which we operate. Through our ongoing commitment to providing the world’s most advanced sensor-based sorting systems, we deliver TOMRA’s brand promise of “trusted technology and partnership for better business and environment.” ...


    By TOMRA Sorting GmbH.

  • Minsur - Tin giant gets boost from TOMRA ore sorting technology - Case Study

    A plant for treating mined waste and low grade material at the world’s largest underground tin mine has repaid its capital cost of US$24 million in just four months, thanks in part to the role of a TOMRA X-ray transmission (XRT)-based ore sorting machine. The plant went into operation in 2016 and is projected to contribute 6,000 tonnes of refined tin to the ...


    By TOMRA Sorting GmbH.

  • Buying Tips: Crushing & Screening Equipment

    In India where the use of concrete and road aggregate has continued to expand due to the development of needed infrastructure, the use of good quality stone crushing equipment is very handy for a busy contractor with tight deadlines to meet, says Supreme Infrastructure India Ltd’s, Assistant General Manager - Procurement, Pankaj Udeshi. Talking about what are the points to be considered ...


    By MB Crusher

  • Waste handling systems for hygiene product manufacturers

    Valvan Baling systems is the preferred supplier for waste handling systems at several renowned hygiene product manufacturing companies. One of the largest producers of hygiene products, such as diapers and feminine care, has built a new state-of-the-art plant. All the trim waste from the production lines is handled through a waste handling system, built and installed by Valvan Baling ...


    By Valvan Baling Systems NV

  • Case study on quartz sorting with laser - Case Study

    Top quality quartz for silica production is gained by means of laser sorting. This process requires coarse grained quartz (SiO2) that is reduced to silicon (Si) in melting furnaces. Apart from a grain size of 20–120 mm, that quartz must have a low content of iron, aluminum and titanium.   After extensive tests in the test centre specialized to ...


    By TOMRA Sorting GmbH.

  • Case study - REDWAVE XRF - State-of-the-art technology for ore mining

    Here, ore mining began in the fourth century - a date which is supported by remains of melting furnaces found in the small Styrian town called Eisenerz (the German word for iron ore). The name could not be more characteristic. The reddish terraces of the Erzberg, the largest open cast mine of Central Europe and, at the same time, the largest siderite deposit worldwide, are widely visible. It is ...

  • Case study - D&E Robbert at Leatherhead (Surrey), United Kingdom

    Waste Separation System including: 1 Belt Separation System  10 mtr long 1200 mm width flat belt 1 Feed Conveyor to Trommel Screen 4 mtr long 1200 mm width flat belt 1 Trommel Screen 263 ; -30 / +30 1 Link conveyor to picking station 11 mtr long 1200 mm width Chevron belt 1 Permanent overband magnet 1 Picking ...

  • Case study - DTS Environmental LTD at Barnsley (Carlton), United Kingdom

    Waste Separation System including; 1 Vibratory feeder system 12 Conveyor belts 1 Trommel screen 384 ; -50 / +50 3 Permanent overband magnets 1 Picking station - 4 Bay 1 Air separation system 1 Screening station ; 0/ -20 ; +20 /50 Waste separator ; Type 400-2 Air retractiion system 1 ...

  • Case study - BLC Group nv at Ronse, Belgium

    Sorting system for BLC Group nv at Ronse, Belgium Sorting System including: 1 Belt feeder system 1 Trommel Screen Design, Production and Delivery ...

  • New ways for metal recycling

    REWAVE XRF 3-way-sorting in innovative  “Free-Fall”-design Recycling of metal and aluminium knows no limits because it can be remelted as scrap indefinitely. Metals, however have to be separated from non-metallic impurities, and different metals have to be sorted in pure fractions to be used as secondary raw materials substituting primary resources. Especially when it ...

  • Case study - MBT Posen

    Engineering and planning, procurement, production and delivery of machinery and materials handling as well as installation and commissioning of parts of a plant for mechanical and biological treatment. Customer: ZZO Poznan Retention: October 2014 Acceptance: June 2016 Input: Biowaste ...


    By Eggersmann Anlagenbau

  • Case study - Plant for ash treatment, Singapore

    Engineering and planning, procurement, production and delivery of the complete plant engineering as well as installation and commissioning. The contained metal elements are removed from the slag. The metal-free slag is used as building material for a new island. Customer: Remex Mineralstoff GmbH Retention: August 2014 ...


    By Eggersmann Anlagenbau

  • Planning for Success: Why Your Choice of Screening and Sifting Equipment Manufacturer Matters

    When making any major purchase for your business, your choice of a screening equipment manufacturer is critical. This is particularly true of specialized machinery such as industrial sifting machines. Though you know your business and its needs, there’s a good chance you don’t have the technical background required to make a truly informed purchase. When a manufacturer is ...


    By VibraScreener Inc.

  • Vibrating Screen Separators: Maintenance and Downtime Issues

    A vibrating screen separator is a big investment for any operation and an important part of your overall process. A good screening machine will be able to reliably meet your production goals while keeping your overhead costs to a minimum. The potential for maintenance and downtime are important considerations to factor into a new ...


    By VibraScreener Inc.

  • What’s New with Omnitracs Roadnet Anywhere v4.3

    The Roadnet Anywhere platform received upgrades across its routing, dispatching, mobile, telematics, and business intelligence applications to enhance the user experience. Roadnet Anywhere v4.3 is now available to help fleets plan and monitor routes throughout the day as well as analyze fleet overall operations. The Roadnet Mobile App has received some of the biggest and most noteworthy ...


    By Omnitracs, LLC

  • Additive manufacturing revives Hawker Typhoon aircraft - Case Study

    For almost two decades, the Jet Age Museum in Gloucester, UK, has been working on bringing a Hawker Typhoon aircraft back to the city that originally manufactured it. Struggling to find engineering companies capable of recreating the complete brackets from the original 1938 drawings, which were lacking manufacturing details, the museum got in touch with Renishaw. ...


    By Renishaw plc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you