metal recovery Articles
-
Eriez FinesSort Reclaims Fine Metal Particles
Eriez Magnetics Europe Ltd. FinesSort® Metal recovery system is the ultimate in fine particle metal reclamation. The FinesSort® helps scrap processor’s increase profitability by recovering materials less than 25mm in diameter and thus aids reduction in materials sent to landfill. The Eriez FinesSort is a two stage system incorporating a Rare Earth Permanent Magnetic Drum (Stage 1a) ...
-
Garden Street Iron & Metal Processes 8,000 Tons of Scrap Each Month Using Variety of Eriez Recycling Equipment
Problem: Garden Street Iron & Metal recycling complex, located just west of downtown Cincinnati, OH, has been owned and operated by the Weber family for more than five decades. The complex, set on 22 acres with three nearby rail spurs in Spring Grove, is a beehive of activity as both consumers and businesses truck in ferrous and nonferrous metal for re-processing. To remain on the leading ...
-
Thermal Treatment of MSW - Can we Afford Recycling at the End of the Pipe?
Incineration has clear environmental advantages over direct landfilling since it reduces the risk of pollution of water resources and prevents greenhouse gas emissions. If incinerators are equipped with metals recovery stages, they can be used as recycling processes for mineral materials and metals. Such separating incinerators may become competitive with separate collection schemes for metal ...
-
Metal Recovery from WEEE and Cable
There is a wealth of valuable metals present in WEEE (Waste of Electrical and Electronic Equipment) and cables. However, the recovery is often difficult due to the small particle size range and variable nature of the metals. With the development and launch of the ElectroStatic Separator [in 2020], Bunting now provides a complete multi-stage metal separation solution incorporating several ...
-
Austin AI QXR-M – Technology to improve metal recovery from non-ferrous residues
Existing technology has been used for some time to separate light non-ferrous alloys from heavier non-ferrous alloys; however, over the past three years, there is a significant added value in performing additional separations to recover specific high dollar alloys. Examples of such are separating pure copper from copper alloys (brass and bronze) or wrought from cast aluminum. The only way to do ...
-
Aluminum dross processing, Bahrain
The Gulf region is the world’s fastest-growing aluminum smelting hub, expected to account for 10% of global production by 2010. Aluminum producers remain liable for the ultimate safe disposal of any waste material. Dross arises from aluminum smelting at a rate of approx 2% of production, and only 40% of the dross is recovered as metal. The remaining waste is hazardous and must be treated ...
-
Dry ash processing in France - Case Study
In France the majority of the IBA is processed with conventional equipment removing ferrous and non-ferrous metals. The remaining aggregates are used on landfill and infrastructure projects accros France. Project description Blue Phoenix Europe has integrated its ballistic separation technology into the existing IBA processing installation of R.E.P. (Veolia) to further improve the fine ...
-
Evaluation of chitosan flakes as adsorbent for palladium and platinum recovery from binary dilute solutions
In the recent years, special attention has been paid to the competitive recovery or separation of metals from industrial wastewaters or solid wastes that contain more than one chemical component. Platinum group metals (PGMs), particularly palladium and platinum, are used together in many fields such as industrial catalyst production. The recovery of these metals from industrial waste streams has ...
-
Guidetti in Australia - Case Study
Country: Australia Machinery: PMG600 - SINCRO415MILL Guidetti line composed of PMG600 pre-shredder and compact granulator Sincro415Mill, with production up to 300 kg/h. Advantages: compact, ecological and easy to use and maintain, this line is designed for maximum recovery of metals and plastics, with a very low noise level. The combination with the pre-shredder improves its performance, ...
-
Eddy Current versus Electrostatic Separation
Separation technology plays a major role in the recycling of waste materials. Metals are recovered using one or a combination of metal separators including Magnetic Separators, Eddy Current Separators and ElectroStatic Separators. Eddy Current Separators and ElectroStatic Separators play an important role in maximising metal recovery and revenue from complex streams presently processed by metal ...
-
Recovery Of Metals Using Combustion
Process industries generate a number of hazardous waste streams containing metals bound with organic components. These metals can be quite valuable if they can be separated from the organic components and recovered. Four projects are discussed. ...
-
Aluminum Casting Foundry Flux
Aluminum Casting Foundry Flux Aluminum Casting Foundry Flux- COVER FLUX Adtech cover fluxes prevent oxidation of aluminum alloy and hydrogen pick up from the furnace atmosphere. Additional benefits are better skimming of dross, and prevention of dross buildup on the furnace/crucible walls. Cover fluxes are available for a wide range of aluminum processing temperatures. Aluminum Casting Foundry ...
-
Factroy sales directly copper wire granulator machine
Copper wire granulator, also called copper wire recycle machine, replaces the traditional way, which can get pure copper, and no secondary pollution to the environment. The separation process of copper wire granulator is: 1.Shredding the cable wires firstly-using a shredder to shred the waste cable wire into small pieces with the length of 2-5cm; 2.Crushing the small pieces secondly-using one ...
-
What’s the use of copper and plastic separated from waste cable wires?
Most waste cable wires are made of copper and plastic, the rest are made of aluminum and plastic. Most of people know that we can recycle copper and plastic from waste cable. But there are little people know that the use of copper and plastic. In this article, I will tell you the use of copper and plastic separated from waste cable wires. For the copper, it can be sold directly to the person who ...
-
Recovery of aluminium alloys and some valuable salts from Spent Bottle Covers
This work provides a method to prepare standard Al-alloy(s) and some salts of market value from Spent Bottle Covers (SBCs). Aluminium covers were separated from others made of iron or plastic by magnetic and flotation techniques. The aluminium covers were melted under flux. Metals went into the slag were leached using hydrochloric acid. Results obtained revealed that the removed paint decomposed ...
-
ELVs Recycling
End-of-life vehicles are a valuable source of secondary raw materials, including mixed metals. From body parts to components and electronics, sensor-based metal sorting systems effectively detect, separate and purify the various non-ferrous metal fractions found in automotive shredder residue (ASR). Achieve higher purity and metal recovery rates with our multifunctional sorting units that remove ...
-
How to granulate copper wire to get pure copper?
With the more and more waste electric copper wires need to be dealt with in the all over the world, the recycle machine is become necessary. Then how to granulate copper wire to get pure copper? The approximate method is Crushing-Air separation-Electrostatic separation. We adopt one environmental protect type machinery-copper wire granulator, also called copper wire recycle machine to replace the ...
-
Sequential recovery of copper and nickel from wastewater without net energy input
A novel bioelectrochemical system (BES) was designed to recover copper and nickel from wastewater sequentially. The BES has two chambers separated by a bipolar membrane and two cathodes. Firstly, the copper ions were reduced on a graphite cathode with electricity output, and then with an additional bias-potential applied, the nickel ions were recovered sequentially on a copper sheet with ...
-
REDWAVE Metal Days 2015 - Review
The REDWAVE Metal Days, at BT-Wolfgang Binder in Gleisdorf, provided the context for international experts from various sectors of the metal and aluminium recycling industry to exchange information on markets, technologies and practical experience. In addition, the new REDWAVE XRF-M sorting system, for recycling in the metals sector, was presented to the participants. The interest of ...
-
Electrostatically Recovering Copper Wire
A combination of an ElectroStatic Separator and a Metal Separation Module is enabling the recovery of fine copper and other metals from a waste product at a UK metal recycling ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you