plastic separation Equipment in Australia

12 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Waste & Recycling ×

  • Subcategory: Waste Separation ×

  • Keyword: plastic separation ×

  • In: Australasia ×

  • In: Australia ×

Eldan - Model PC10T / PC15T / PC15 / PC17.5 / PC1000 - Classifiers

by Eldan Recycling A/S     Office in Gordon, AUSTRALIA

As a basic principle, the Eldan Classifiers use oscillating motion and screens to separate either textile and rubber or metals and the plastic fraction.

Eldan - Model WST - Water Separation Table (System)

by Eldan Recycling A/S     Office in Gordon, AUSTRALIA

The Water Separation System is a cost effective solution to recover metal dust and fine wires from the plastic fraction after the metal separation. By using a well-balanced combination of water, table inclination and oscillating movements you will get an almost clean plastic fraction with metal losses as low as 0.2%. The metal fraction will have a ...

Model CF 1500P [Plastic] - Reverse Vending

by ENVIPCO     Distributor in AUSTRALIA

Throughput: Up to 32 bottles per minute, Densification: Flattened or flaked, Acceptance: Clear or colored PET with separation, Bottle size: Up to 3 liters, Capacity: 1,500 bottles (20 ounce) when flaked, 500 bottles (20 ounces) when crushed.

Hurrikan - Stationary Windsifter

by Komptech GmbH     Distributor in AUSTRALIA

The stationary Hurrikan high-performance windsifter allows effective cleaning of over-sized screened particles. The unit is extremely compact for a windsifter and can be integrated easily into a system chain. The patented 'pressure-suction' principle is used to separate plastic with a high degree of selectivity.

Hurrikan - Mobile Windsifter

by Komptech GmbH     Distributor in AUSTRALIA

The Hurrikan wind sifters provide effective removal of plastic film from screen overflow. They work with a patented pressure-suction process that gives the Hurrikan S a separation efficiency of up to 95 percent (up to 90 percent for the Hurrikan).  Electric drive of all components ensures top efficiency while offering many control ...

Sesotec - Model FLAKE PURIFIER M Series - Metal Separation System

by Sesotec GmbH     Distributor in AUSTRALIA

The FLAKE PURIFIER M is a metal separation system, developed to analyse PET flakes and used to separate metal particles. New micro processor technology enables precise localisation of metal particles and separation with minimal loss of good material. The FLAKE PURIFIER series is based on a modular concept in which up to three sensors can be ...

Sesotec - Model FLAKE PURIFIER C - Colour Sorting System

by Sesotec GmbH     Distributor in AUSTRALIA

The FLAKE PURIFIER C is a colour sorting system, developed to sort PET flakes and used to separate differently coloured PET flake streams into pure colour fractions. The FLAKE PURIFIER series is based on a modular concept in which up to three sensors can be combined. In addition to colour separation, the FLAKE PURIFIER can also perform metal ...

NRT MultiSort - Model IR - Advanced Automated Plastic Bottle Sorter

by Bulk Handling Systems     Distributor in AUSTRALIA

The MultiSort IR advanced automated plastic bottle sorter is a high performance system designed for 24/7 operation. Used in MRF applications worldwide, the system utilizes high speed industrial infrared sensing to detect specific polymers within a mixed stream of material and incorporates high precision air ejectors to accurately sort selected ...

WtRecycle

by Entech - Renewable Energy Solutions Pty Ltd.     based in Canning Vale, AUSTRALIA

WtRecycle is the first stage of the Entech-Tru-RES for MSW applications. It’s a MRF (Mechanical Recycling Facility). ENTECH will cooperate with existing MRF operators, or alternatively provide new MRF based upon proven designs that are currently in operation. The WtRecycle system is as described below. Household waste is notoriously ...

Nihot - Air Technologies

by Bulk Handling Systems     Distributor in AUSTRALIA

Nihot Recycling Technology uses controlled air to efficiently and reliably separate waste by its density characteristics. These units are at the core of our patented MSW sorting process, and are used to liberate the lighter (and higher value) products from inert and contaminated materials. When applied to C&D recycling, this technology can ...

Model 450 DX - Banding Chopper

by Sweed Machinery, Inc.     Distributor in AUSTRALIA

The newly designed Model 450 DX combines the chopping benefits of Sweed’s previous Model 450 WM and Model 450 WM XHD into one unit. It is the preferred scrap chopper to tackle high volumes of 3/4” steel banding with clips, plastic banding, light weight wire and other various manufacturing materials. It is also very versatile; this unit ...

Model CF 1500 Series - Reverse Vending

by ENVIPCO     Distributor in AUSTRALIA

Clients choose the CF 1500 series for its high capacity, advanced materials handling, and dependability. Designed to offer advanced features previously only available with high-volume models, the series offers faster and better performance than any other in its class. Remote communication and reporting is available, and customized receipt vouchers ...

Need help finding the right suppliers?

Let the XPRTs do the work for you