waste separation plant Equipment

177 Results found
Only show results in Virginia?
OK
  • Category: Waste & Recycling ×

  • Subcategory: Waste Separation ×

  • Keyword: waste separation plant ×

REDWAVE - Plant Solutions for Single Stream

by REDWAVE a division of BT-Wolfgang Binder     based in Gleisdorf, AUSTRIA

Integral plants for treatment and sorting. Reconstructions and extensions. Development of concepts. REDWAVE sensor-based sorting technology. Sieving technology. Materials handling technology. Air technology. REDWAVE guarantees high throughput of materials with maximum recovery of materials achieving maximum return on the separated commodities.

Model HFS 1200 - Heavy Fraction Separator

by Lindner-Recyclingtech GmbH     based in Spittal/Drau, AUSTRIA

For the processing of domestic and commercial waste, heavy-duty shredders are applied that process the waste in fractions for cost-effective separation and/or incineration. This processing, however, can be affected by extraneous material of unknown size, amount and condition. In order to protect final shredders against damages, the “Heavy ...

swissRTec - Model SRT 2 - Delamination and Separation Plant

by swissRTec America, Inc.     based in Kensington, NEW HAMPSHIRE (USA)

SRT 2 represents the next level in profitable metal recovery from composite input materials. E-Waste, ASR, Cable etc. is material with a composite raw material value locked within. Typical feedstock for the system is material which has been pre-processed by the swissRTec SRT 1 Shredding and Separation Plant.

Model SRT 1 - Shredding and Separation Plant

by swissRTec America, Inc.     based in Kensington, NEW HAMPSHIRE (USA)

SRT 1 is first choice for the primary shredding and separation of E-waste, ASR, mixed metals and many more waste materials. swissRTec is able to tailor the system based on your specific requirements of throughput, input material and downstream processing. The unique advantage of the Kubota Vertical Shredder is its ability to liberate and downsize ...

MPPE & TiPSS - Model CPI - Corrugated Plate Interceptor for Oil-Water Separation

by MPPE & TiPSS Technology – Veolia Water Technologies     based in Ede, NETHERLANDS

The CPI is the basic TiPSS unit mainly used for oil-water separation. The CPI holds modular-counter-current-flow plate packs executed in GRP or Stainless Steel. The CPI basin can be executed in concrete or steel. The concrete units are specifically suited to integrate with sewer systems below ground level so that a gravity flow can be used. The ...

Ballistic Separator

by KEY GLOBAL ITALIA srl     based in Novara, ITALY

The basic principle of the Ballistic Separator, is based upon 6 rotating paddles arranged parallel to each other, with double transmission. Each set of paddles is constructed with the possibility of angle adjustments. Depending on the case of application the paddle surfaces are designed with given perforations and structure of carriers, or closed. ...

Solid Waste Shredder

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Solid waste and municipal solid waste (MSW) size reduction requires processing of many different materials, from filled drums to household waste. And, as the amount of solid waste increases and the cost of landfill management increases, it is becoming more critical that waste management become more effective, economic and efficient. Shredded and ...

JFE - Model DX - High Clean for Collected Dust/Ash Dioxin Decomposition Systems

by JFE Engineering America Inc.     based in Long Beach, CALIFORNIA (USA)

The JFE High Clean DX is JFE Engineering’s original technology for volatizing, separating, and decomposing dioxins contained in fly ash. Fly ash is fed into the cylindrical reactor. Dioxins and hazardous organic compounds adhering to the fly ash are volatized and separated by mixing, fluidizing, and heating them at a temperature of 400 ...

Inspection and Sorting Systems

by Ventilatorenfabrik Oelde GmbH     based in Oelde, GERMANY

No matter whether waste is bio-mechanically pre-treated or burnt, it is advisable in any case to separate out any impurities. Venti Oelde offers a number of different air classifying systems, so-called wind sifters. These are characterized by using recirculating air and by their capability of handling large volumes. New developments such as the ...

Waste Sorting Plants

by Parini s.r.l.     based in Albinea (RE), ITALY

PARINI offers its Customers the benefits of over twenty years’ experience in the field by implementing a process that begins with a preliminary study of the plant and leads to the final design, construction and assembly. Almost all our machines, drum sieve machines, ballistic separators, conveyors platforms and sorting cabins are ...

AUT - Ballistic Separator Mixed Material Batches

by AUT Anlagen- und Umwelttechnologie GmbH     based in Chemnitz, GERMANY

By means of the ballistic separator mixed material batches are classified according to size, shape and weight, generating three different output fractions. This increases the accuracy of subsequent automatic or manual sorting processes and guarantees the recovery of mono-material batches. Due to its separation method, the ballistic separator is ...

Fully Automatic MSW Sorting Plant

by Disan Hydraulic Machinery Co.     based in Yenibosna, TURKEY

A single-line sorting plant is seen in the side project. The wastes coming with the feeding conveyor into this plant that reaches to 35 t / h capacity; go into the pre-shredder. They are minimized into the size of 350mm, harmful parts are taken manually at pre- sorting, in the meanwhile, the glasses are taken as well. From here, the materials of ...

Semi-Automatic MSW Sorting Plant

by Disan Hydraulic Machinery Co.     based in Yenibosna, TURKEY

In the project placed next the plant having 45-50 t / h capacity, where household waste, is sorted can be seen.Operating way: The material coming from feeding conveyor is sorted in pre-sorting. The bags are opened at bag opener, the surplus of (tromel) 200 mm shall be taken in 1st rotary sieve, the surplus of (tromel) 80 mm shall be taken in 2nd ...

Model RW 508 - Mobile Sugar Beets Washing Plant

by Doppstadt     based in Velbert, GERMANY

Sugar beets carry high dry matter yields. They provide higher methane yields per acre than any other crop. Their good fermentation characteristics are of great importance for the production of biogas. The excessive amount of soil residue adhering to the outside of the beets, as a result of harvesting, has to be removed in a suitable ...

Eriez ProSort - Model II - Eddy Current Separators

by Eriez Magnetics Europe Ltd     based in Bedwas, UNITED KINGDOM

Eriez ProSort improves metal separation while operating at a fraction of the cost of air power metal sorters. Ideal for scrap processors, the new airless ProSort II doubles the number of metal sensors found on the original ProSort machine and positions them on one-inch centers. These high resolution sensors are aligned with a new inverted padd ...

Air-Separating System

by CHH Machinery - Scrap Metal Shredder     based in BRITISH COLUMBIA (CANADA)

Main-Shredder and Vibrator are easy to bring dust into the air while processing. The high efficiency cyclone will remove a high percentage of the light waste materials and convey to the (Auto Shredded Residue, ASR) area.

Mechanical Biological Plants (MBT)

by Taim Weser S.A.     based in Zaragoza, SPAIN

The basic concept of MBT plants is the mechanical treatment of MSW (municipal solid waste) by separating valuable material and the biological treatment of the organic fraction. Our machines and plants are specifically designed for the extreme environmental conditions and have proven their reliability for many years.

Plant Utilization of Wastes

by ORMIC S.p.A.     based in Cambiago, ITALY

Thanks to our selection lines, it is possible to obtain, from a product considered 'waste' materials can be reused indefinitely, such as paper, cardboard, plastic, wood, aluminum. Each plant requires a study and a design of its own. Our technical department with the enormous experience accumulated to date, is able to solve seemingly impossible ...

Waste Separation And Selection Plants

by ING.GALLARATI     based in Broni, ITALY

ROT furnaces for MSW can be coupled to separation and selection lines COPARM, installed upstream of the furnace, to realize INTEGRATED PLATFORMS for MSW with emissions 'near to zero' and with recuperation of precious second materials ( Metals, Plastic scraps etc.) Here below the lay-out of the MSW PLATFORM with n.2 ROT200 lines with n.1 COPARM ...

Separation

by Visno Groep     based in Haarlem, NETHERLANDS

Separation technologies are of prime importance in waste processing industries. As a constructor of waste separation plants Visno has extensive experience with various separation technologies.

Related Terms for waste separation plant

Need help finding the right suppliers?

Let the XPRTs do the work for you