Waste Sludge Equipment For Waste And Recycling Available In Latin America
-
ShowcaseManufactured by Flottweg SEbased in GERMANY
In the process of treating waste water, fine biological sludge is constantly produced during the decomposition process at a sewage treatment plant. For a stable decomposition process in the biological treatment phase, the sludge produced in the secondary sedimentation pond, also known as excess sludge, is removed and fed into the digestion tower. Flottweg's OSE decanters thicken the sludge before ...
-
PremiumManufactured by WESS GLOBAL, INC.based in SOUTH KOREA
ENV200-C clamp-on density measurement guarantees fit-and-forget and reliable measurement with every kind of measuring medium. Different from other density meters, its measurement isn't affected by pressure, corrosiveness, nor abrasiveness. As the clamp-on sensor can be mounted outside of pipe line even under flow-running condition, the user neither need to stop their process nor to consider the ...
-
PremiumManufactured by ENVEAbased in FRANCE
The SM-3 mercury analyzer measures continuously the elemental, bound and ionic mercury in stack fluegas. The operating principle of the SM-3 is based on a completely new technique: mercury compounds cracking and the reduction of ionic mercury contained in stack gas is performed applying the thermocatalytic method. Wet chemical sample gas treatment using reagents and bubblers is avoided. ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The APU Acid Purification Unit is used to continuously remove dissolved metals from process acids to maintain a consistently low level of contaminants. The APU is employed in aluminum anodizing and copper refining operations to purify hydrochloric, acetic, nitric, phosphoric, and sulfuric acids, reducing acid purchase frequency and costs and improving overall process ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Eco-Tec’s Nickel Recovery System, NickelPur ensures maximum nickel salt recovery, cost reduction, and quality consistency. NickelPur utilizes Recoflo, the next generation of ion-exchange technology with compressed-bed, counter-current operation recovering over 95% of nickel dragged out from the plating baths into the rinses. “Nickel drag-out” is a normal operational occurrence ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
The Food/Beverage Titrino plus offers you the complete package for all conventional analyses of foods, beverages and wine. You receive an all-inclusive care package comprised of titrator, magnetic stirrer, electrode, electrolyte and storage solution for the Ecotrode Plus, the optimum pH glass electrode for aqueous acid-base titrations. Buffers for calibration are also ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Eco-Tec offers a system for the purification, recovery, and recycle of various acid mixtures used in the aluminum finishing sector for the brightening, etching, and graining of aluminum product. One such application is the use of phosphoric acid mixtures for the brightening of aluminum in the production of products for automotive and appliance trim, lighting fixtures, bath and shower enclosures. ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Atomic absorption spectrometry at 254 nm with Zeeman correction for background absorption for interference-free ...
-
PremiumManufactured by For.Tec. Forniture Tecnologiche S.r.l.based in ITALY
Our waste incinerators mod. ROTOMAC are rotary or oscillating combustion chamber furnaces, which are suitable for the incineration of almost all types of solid and liquid waste such as whole animals, slaughtering waste and generic organic waste but also hazardous and not-hazardous hospital waste and generic industrial ...
-
PremiumManufactured by Ecological Laboratories, Inc.based in USA
BGE2 by ELI BioScicnces is a blend of humates and humic substances and beneficial bacteria which promotes enhanced microbial oxidation of difficult and slow-to-de-grade organic waste matter, resulting in a significant increase in biomass activity in degrading waste organic ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
The DPU System recovers phosphoric acid and mixed acids in aluminum finishing operations. The system combines a cation resin bed with a water elutable resin bed to economically remove dissolved aluminum from phosphoric acid rinse water, which then concentrates phosphoric acid up to 85% to be ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
RA-915 Lab is the new direct fully automated laboratory mercury analyzer with 45 position autosampler. It provides accurate, reliable and cost-effective measurements in the broadest range of applications areas. The instrument analyzes solid, semisolid, and liquid samples with no pretreatment, reagents and almost no wastes. RA-915 Lab can be supplied without ...
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
"Reduce to the max" - this is the 916 Ti-Touch concept. The new compact titrator from Metrohm offers the maximum in the class of stand-alone systems for routine analysis. The 916 Ti-Touch now also fulfills FDA Regulation 21 CFR, Part 11. This means you are always on the safe side when it comes to audits. The 916 Food Ti-Touch offers you the complete package for aqueous acid-base titrations in the ...
-
PremiumManufactured by BD|SENSORS GmbHbased in GERMANY
The DCL 571 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master slave architecture with which up to 247 slaves can be questioned by a master – the data will transfer in binary form. The probe was developed for level measurement in waste water, sludge or water courses. The ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Based on the APU system, the AnoPur system is specifically adapted for sulfuric acid purification in aluminum anodizing. Dissolved aluminum is continuously removed from sulfuric acid used in anodizing baths to reduce the contaminants to a consistently low level. This eliminates the need for bath decanting, reduces acid purchasing costs, and ensures a consistent and predictable anodizing ...
-
PremiumManufactured by ENVEAbased in FRANCE
The HOFI BOX offers an exclusive sampling system dedicated to heated analyzers. Ideal for corrosive gases. (Plug & play sampling solution for: MIR FT, MIR 9000H, Graphite 52M, Topaze ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Eco-Tec has a range of products that have been developed specifically for treating acid baths used in the production of electrochemically etched aluminum capacitor foils and electrochemically grained aluminum lithographic printing plates. Leading manufacturers of capacitor foils and lithographic printing plates rely on Eco-Tec systems to maintain production quality and efficiency while reducing ...
-
PremiumManufactured by Devise Engineering S.A.based in GREECE
The DEVISE MBF is a mechanical micro-solids separator based on the ‘continuous band/tape- filtration’ principle that is used to remove solids from all kinds wastewater. This machine can remove organic and inorganic matter, such as food waste, tissue- paper, inert material, fat, grease, animal slaughter remains, fish-remains and other biodegradable suspended solids from a wide range of ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Etching or chemical milling with caustic soda can often be the greatest operating expense in aluminum anodizing. Our CER Caustic Etch Recovery System continuously crystallizes and removes dissolved aluminum from caustic soda etchants and returns the caustic to the etching/milling tanks for reuse resulting in reduced chemical costs, waste treatment costs, and labor requirements. The separated ...
-
PremiumManufactured by Raven Environmental Products, Inc.based in USA
Solids % Volume In Just 15 Minutes. Since 1983 Raven's F-10300 Process Centrifuge has been a workhorse for industrial applications. From wastewater to wine, this is the centrifuge that process engineers rely on more than any other. Just load and go. The digital countdown timer alerts you at cycle end. 3000 RPM. Tracking the percent of solids in a given sample provides operators with proactive ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you