Waste Solidification Equipment For Waste And Recycling Available In Tajikistan
-
PremiumManufactured by CETCObased in USA
QUIK-SOLID 50 is a custom blend of granular cross-linked polyacrylate super absorbent polymer and ORGANOCLAY. This high performing product rapidly absorbs and retains large volumes of aqueous solutions, while also offering a hydrophobic component to adsorb low soluble organic matter. The absorptive properties of QUIK-SOLID 50 are ideally suited for the solidification of wastewater, sediments and ...
-
PremiumManufactured by CETCObased in USA
SLURRYBOND is a powdered inorganic mineral formula used for the solidification of high solids drilling slurries. SLURRYBOND is made from a non-biodegradable mineral designed for use on waste slurry that fails to pass a Paint Filter Liquids Test (PFLT) or a slump test. SLURRYBOND will solidify waste slurry on the job site and allow waste to be transferred to the disposal ...
-
PremiumManufactured by CETCObased in USA
SLURRYBOND 2000 G is a powdered inorganic mineral and polymer formula used for the the solidification of high solids drilling slurries. SLURRYBOND 2000 G is made from a non-biodegradable mineral and polymer mixture designed for use on waste slurry that fails to pass a Paint Filter Liquids Test (PFLT) or a slump test. SLURRYBOND 2000 G will solidify waste slurry on the job site and allow waste to ...
-
PremiumManufactured by CETCObased in USA
SLURRYBOND 2000 is a dry product intended to solidify drilling spoils for disposal purposes. SLURRYBOND 2000 is a powdered inorganic mineral and polymer formula used for the the solidification of high solids drilling slurries. SLURRYBOND 2000 is made from a non-biodegradable mineral and polymer mixture designed for use on waste slurry that fails to pass a Paint Filter Liquids Test (PFLT) or a ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
JONO exclusively introduced MVT technology into China. MVT not only designed and built biological drying and composting systems, but also produced almost all equipment used for biological drying and composting. In Europe, MVT has built hundreds of biological drying facilities and renovated many poorly functioning ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
Count on maximum stability when pressing waste and recyclables in a continuous operation.The horizontal baler type AVOS 1410 BRHF with 30 HP drive capacity and 110,000 lbs. of press force is the optimal machine where continuous performance in long-term operation is required, for example, in central warehouses and dispatch warehouses working in three shifts. The press is equipped with a ...
-
PremiumManufactured by Daliform Group Srlbased in ITALY
Eolo represents the efficient, fast and economic remedy for the realisation of a perforated floor in reinforced concrete with high load-bearing capacity, which can be also accessed by heavy vehicles. Thanks to the vertical asymmetric nozzles, axially perforated, it can be conveniently used for the distribution of air in composting, waste stabilisation systems, deodorising systems and for ...
-
Manufactured by Baichy Machinerybased in CHINA
All jaw crushers have two jaws: one is a fixed jaw and the other is a movable jaw; the working principle of a jaw crusher is based on the reciprocating motion of the movable jaw and fixed jaw to squeeze into crushing The material in the cavity will be discharged from the bottom as the movable jaw moves away from the fixed jaw, and the size of the discharged material is determined by the gap ...
-
Manufactured by Coco Products, LLCbased in USA
CocoDry™ is an ideal water absorbent for hardening/ solidifying waste paint for disposal, ideal for use with water-based paints (acrylic & latex) and oil -based paints with one product, a product that is both safe to use and safe for landfill disposal. CocoDry’s™ superior and rapid absorption of moisture will turn any paint into a solid substance. The solid cannot ...
-
Manufactured by Coco Products, LLCbased in USA
CocoDry™ is an ideal water absorbent for hardening/ solidifying waste paint for disposal, ideal for use with water-based paints (acrylic & latex) and oil -based paints with one product, a product that is both safe to use and safe for landfill disposal. CocoDry’s™ superior and rapid absorption of moisture will turn any paint into a solid substance. The solid cannot ...
-
Manufactured by Chromafora AB - Ragn-Sells Groupbased in SWEDEN
The Chromafora Way is based on our award-winning technology for purification of waste water and selection of metals and organic pollutants. The process is cost efficient and environmentally friendly, the used chemicals are recyclable and the additives are biological decomposable. In other words, a pure profit for the environment and for your ...
-
Manufactured by Invivo Biosciences, LLCbased in USA
Targeted removal of phenolic compounds. Invivo Wastewater contains a phenol-degrading blend of bacteria with high biodegradation activity, together with a high tolerance of these artificial mono-aromatic compounds for application to waste water and industrial effluents containing phenol, cresols and related aromatic compounds. These strains contain vegetative and spore forming bacterial strains ...
-
Manufactured by Clean Water Technology, Inc.based in USA
The DSP (Dewatering Screw Press) is a powerful wastewater treatment system able to treat many types of industrial wastewater or sludge in one single operational ...
-
Manufactured by Razak plastbased in IRAN
Standard: EN 840 Material :Virgin HDPE +UV Stabilizer Four-Wheeled Waste Bin ...
-
based in TURKEY
The liquid portion of infectious medical waste would contaminate the environment to certain extent during at the points of generation, during the internal and external transports, interim storage and temporary storage, etc. by spillage, leak or accidents. The possible hazard by inhalation and contact might be very high and unpredictable. To prevent the predicted and un-predicted hazards of liquid ...
-
Manufactured by M2 Polymer Technologies, Inc.based in USA
Waste Lock770 is a solid, granular Superabsorbent Polymer. This cross-linked polyacrylate material swells and absorbs many times its weight in aqueous solutions. Waste Lock770 has been engineered to absorb under pressure and has properties that make it ideally suited for the absorption and solidification of low level radioactive waste (LLRW) and other types of waste ...
-
Manufactured by Tenmat ltdbased in UNITED KINGDOM
Railko RG1 and RG11 are based on a woven fabric bonded with resin. Railko RG1 and RG11 grades have the advantages of high temperature capability, high compressive strength, high pressure velocity, controlled friction, and low swell in fluids. The material is used as bushes, bearings, thrust washers, sliding ...
-
Manufactured by Razak plastbased in IRAN
Standard: EN 840 Material :Virgin HDPE +UV Stabilizer 2-Wheeled Waste Bin ...
-
Manufactured by HSM GmbH + Co. KGbased in GERMANY
The strong document shredder with a 240 litre bin for demanding in-house data destruction. The robust shredder has a powerful cutting unit with a wide feed-in opening for formats up to DIN A3. ...
-
Manufactured by Razak plastbased in IRAN
Standard: EN 840 Material :Virgin HDPE +UV Stabilizer Four-Wheeled Waste Bin ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you