Waste Sorting Applications available in Latin America
-
Premium
Metal Separators for WEEE
REGULATOR-CETRISA, as manufacturer of metals separation equipment, offers different solutions for cleaning metal pollutants from. Before the E-Waste enter into the shredding process, any contaminating material, like batteries, color cartridges, tonners, etc., must be removed manually from the incoming ...
By Regulator-Cetrisa based in Gavà, SPAIN.
-
Premium
Home Appliances Shredding And Sorting Recycling Solution
This solution of shredding and sorting for home appliances integrates hardware and software and adopts a modular design. The production line covers the feeding system, crushing system, magnetic separation system, sorting system, dust collection system, ...
By Enerpat Group based in Nantong, CHINA.
-
Premium
Coriolis Air Sampler for Pollution and Environment
The Coriolis air sampler collects biological particles in the air for biosphere and environmental air quality ...
By Bertin Technologies based in Montigny-le-Bretonneux, FRANCE.
-
Premium
Advanced FT-NIR Analysis for Chemicals & Polymers Industry
Near infrared spectroscopy has been widely used in the chemicals and polymers industries for years. This is because it is a rapid technique that eliminates sample preparation and costly consumables. FT-NIR analysis is non-destructive, capable of simultaneous analysis of multiple components, and can be used for online monitoring. With flexible sampling mechanisms, NIR can analyze solids, liquids, and ...
By Galaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA).
-
Premium
AI visible light sorting for plastic recycling machines
AI visible light sorting for plastic recycling ...
By Suzhou Jono Environmental Technology Co., Ltd based in Suzhou, CHINA.
-
Premium
Waste Treatment Solution for Industrial Waste
Industrial waste refers to solid waste discharged by machinery, light industry and other industries during the production process. It is mainly divided into five categories: food waste, general waste, construction waste, cleaning waste and hazardous waste. JONO uses the mature automatic sorting production line for industrial waste to manufacture raw materials for construction materials such as cement, concrete aggregate, brick and tile. Extract iron, aluminum, copper, zinc, nickel and other metal resources and ...
By Suzhou Jono Environmental Technology Co., Ltd based in Suzhou, CHINA.
-
Premium
XRF Spectrometers solutions for scrap sorting industry
Scrap metal identification and sorting are some of the most important tasks in recycling. The analysis might take days if not months, depending on the pile. But if you have a handheld XRF for scrap metal sorting, speed and efficiency are ...
By Elvatech Ltd. based in Kyiv, UKRAINE.
-
Premium
XRF Spectrometers solutions for positive material identification (PMI) sector
Positive Material Identification is the detection of materials through non-destructive element spectrometry in samples of metals, steel, and alloys, which is used to check the component composition of ores, soils, and other liquid and powder samples. This technology is widely used in various industries, numerous research, and academic laboratories worldwide due to the quickness and accuracy of the analysis. XRF PMI machine is usually used for these purposes. ...
By Elvatech Ltd. based in Kyiv, UKRAINE.
-
Premium
Waste Treatment Solution for Recyclable Waste
Recyclables is defined as recycled waste, such as paper, cardboard, plastic,metal,synthetic materials, ...
By Suzhou Jono Environmental Technology Co., Ltd based in Suzhou, CHINA.
-
Waste handling in flight catering kitchens
Large catering kitchens at airports are operational more or less round the clock. They have to deal with enormous amounts of waste from incoming aircraft, food preparation kitchens and staff canteens. Compared with traditional manual refuse collection methods, an automated kitchen waste system is safer, more efficient, more hygienic – and cheaper in the long ...
By Envac AB based in Stockholm, SWEDEN.
-
Sorting Solutions for Plastic Processing
The recovery of single-type plastics and other recyclable materials is an ever greater and more important challenge for the processing industry. Through intensive research and development work, we always offer you the latest in sorting technology. The areas of application in plastics sorting are often very different. For example, hollow bodies (PET, HDPE, PP, etc.), foils (LDPE, PP, etc.) and biodegradable plastics can be efficiently recovered; chlorine-containing compounds (PVC), plastics with flame retardants, ...
By REDWAVE - a division of BT-Wolfgang Binder GmbH based in Eggersdorf bei Graz, AUSTRIA.
-
Recycling solution for plastic waste sector
A plastic waste installation separates, sorts and processes valuable packaging materials, such as PET, PE, PP and Tetra Pak, ferrous and non-ferrous metals, which are then baled and shipped for reuse. Bollegraaf’s effective and innovative solutions remove plastics from waste, minimising the amount going to landfill. Our equipment can work with existing combined waste streams and in specialist plastic only sorting installations. Optimising economic value with the lowest possible costs per tonne is the ...
By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS.
-
Recycling solution for construction & demolition waste
Bollegraaf design and install specialist equipment to process construction and demolition (C&D) waste into valuable materials, such as wood, RDF, paper, ferrous and non ferrous metals in order to minimise the waste fraction that is sent to landfills. Construction and demolition waste constitutes one of the largest waste streams in the EU, with an annual production of 1 billion tonnes. Increasing landfill tax rates and growing environmental awareness make recycling C&D waste a solid business ...
By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS.
-
Shredders and crushers for special waste recycling sector
Stopping the spread of hazardous waste. Ever-increasing consumption across Europe, coupled with rising prosperity among the populations of the typical emerging economy are causing a sharp upturn in the volume of waste worldwide. Our shredding machines are perfectly suited for ...
By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY.
-
Sorting Solutions for Single Stream
Regardless of which collection system is used and the respective task, we design plant systems that ensure 100% efficiency. Depending on the country, there exist different collection systems for waste, which leads to different tasks in sorting technology. For example, packaging waste usually consists of various plastics, paper and glass. Single stream waste, as it is known in the UK, consists mostly of dry, mixed waste (paper, cardboard, foils, plastic packaging, metals, aluminium, and in many cases, glass). ...
By REDWAVE - a division of BT-Wolfgang Binder GmbH based in Eggersdorf bei Graz, AUSTRIA.
-
Waste handling solutions for the waste splitting sector
Mechanical treatment as the foundation for recycling: The reuse of materials and energy from waste is central to modern waste management. The foundation for it is laid by mechanical preparation in the form of waste splitting. In it, recyclables are recovered from the waste stream and high-yield combustibles are separated out for further processing as refusederived fuels (RDF). The remaining residue fraction can be stabilized and then ...
By Komptech GmbH based in Frohnleiten, AUSTRIA.
-
Special plants for recycling municipal solid waste (MSW)
The treatment of municipal solid waste is intended to recover essential raw materials. Forrec has developed a wide range of special plants for recycling municipal solid waste (MSW). The technologies employed by Forrec are aimed at sorting and recovering high quality recyclable municipal and industrial materials suitable for market needs and for energy recovery from non-recyclable dry waste (SRF). Separation of materials takes place using an automatic sorting system, which involves various types of tools: including ...
By FOR REC S.P.A. based in Santa Giustina in Colle, ITALY.
-
Environmental Technology for Paper and Packaging
EUROPRESS Umwelttechnik is a specialist in mechanical engineering for channel baling presses and sorting systems. We offer custom-fit solutions to specialist companies for recycling paper and packaging. Our technology is also successfully used in the pressing of production and punching ...
By Europress Umwelttechnik based in Lathen, GERMANY.
-
Smells Treatment for Waste
We create and implement tailored or standardized treatment solution. Our industrial engineers combine their expertise with years of operational experience allowing clients to focus on their core businesses. Our solutions range from the treatment of small household waste bins to large waste disposal ...
By Biothys GmbH based in Willstätt-Eckartsweier, GERMANY.
-
Sorting Solutions for Waste Paper Processing
The demands on the paper industry in the coming years require a completely new understanding of quality and material availability. Changes in our demographic and economic behaviour make a new generation of sorting machines indispensable. In order to provide our customers with the best possible support for future challenges, the REDWAVE 2i was specially developed for the upcoming requirements in the paper industry. Based on the very successful NIR / C, the REDWAVE 2i has been improved and optimised in many ways. ...
By REDWAVE - a division of BT-Wolfgang Binder GmbH based in Eggersdorf bei Graz, AUSTRIA.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you