Waste Sterilization Articles

  • Trade SIA on the Environmental Goods Agreement OZONATOR - Case Study

    An innovative technology has been developed in Canada for the processing of medical and bio-hazardous waste using ozone as the sterilizing agent. Ozone is generated and is produced from ambient air and any residual ozone is converted back to oxygen, resulting in zero emissions. Waste is sterilized at room temperature without heat, steam, chemicals, flames, exhaust, odours with nothing to drain or ...


    By OZONATOR Industries Limited

  • Trade sustainability impact assessment on the environmental goods agreement - Case Study

    EXECUTIVE SUMMARY On 24 January 2014 at the World Economic Forum in Davos, the EU, together with 13 other WTO members pledged to launch negotiations to liberalise global trade in environmental goods (EGs). The negotiations are employing the Asia-Pacific Economic Cooperation (APEC) list of environmental goods as a starting point with the intent of expanding it to liberalise a "broad ...


    By OZONATOR Industries Limited

  • Entrepreneur Connects Generators To AD

    A Northeast company brings anaerobic digestion and renewable energy to the feedstock sources in Ohio and New York State. Western New York is one of the top dairy-producing regions in the U.S. The by-products of making milk, cream, yogurt and other dairy products have certain characteristics that make them ideal fuel for anaerobic digesters designed to produce methane gas for the ...


    By BioCycle Magazine

  • Ebola Waste Preparedness

    A straight forward plan to deal with an issue that may seem new to many of you however this issue has been successfully addressed for decades. It’s all over the news, landfills that won’t accept ashes from incinerated waste, towns and states that won’t let waste be transported across their borders, special permits, Category A Packaging, warehouses full of drums and 6mil liners. ...


    By WasteStrategies

  • Medical Waste and it’s potential hazards

    A review of medical waste management systems was performed to understand (a) the various handling  and disposal procedures in different countries, ( b) the knowledge and awareness of individuals involved  in medical waste generation, handling and disposal, and (c) the potential impacts of the waste stream on  both human health and the natural environment. The purpose of the study ...

  • Cementatious considerations for medical waste solidification

    The most common cause for alarm in the medical field pertaining to waste disposal is the exposure of the worker to infectious wastes and contraction of diseases from these wastes. With the increased risk of exposure to blood borne pathogens in handling body fluids and disposal of items that have been tainted by these fluids, awareness and education for the prevention of percutaneous wounds is the ...

  • Production of propionic acid-enriched volatile fatty acids from co-fermentation liquid of sewage sludge and food waste using Propionibacterium acidipropionici

    Volatile fatty acids (VFA), derived from sludge fermentation, have been used as one effective carbon source for biological nutrient removal, especially favorable with VFA containing with high levels of propionic acid. In this paper, a new fermentation method was employed to significantly produce the propionic acid-enriched VFA from the co-fermentation liquid of sewage sludge and food waste: ...


    By IWA Publishing

  • Waste not in Asheville

    Asheville, North Carolina, has gained a national reputation as a hub of local and artisanal foods. In fact, the local foods movement in this Southern Appalachian city has become so embedded in the community consciousness that the city has dubbed itself “the world’s first Foodtopian Society.” There are hundreds of unique restaurants, dozens of bakeries, breweries and ...


    By BioCycle Magazine

  • Benefits of OZONATOR Technology for the Treatment and Sterilization of Medical and Bio-Hazard Waste

    OZONATOR Industries Limited white paper outlines the environmental benefits of ozone based technology for the treatment of regulated medical waste and bio-hazard waste.  OZONATOR Industries Ltd. is the world-wide manufacturer of the OZONATOR NG-3000 medical and bio-hazard waste treatment technology – with zero emissions. The OZONATOR is a revolutionary advancement in waste treatment ...


    By OZONATOR Industries Limited

  • Reducing food waste: Making the most of our abundance

    According to staggering new statistics from the United Nations Food and Agriculture Organization (FAO), roughly one-third of the food produced worldwide for human consumption is lost or wasted, amounting to some 1.3 billion tons per year. In the developing world, over 40 percent of food losses occur after harvest-while being stored or transported, and during processing and packing. In ...


    By GLOBE Foundation

  • Sustainable remediation

    The term remediation refers to procedures implemented to eliminate contaminants and toxic waste from polluted landfills, water bodies and other places to promote environmental health and safety. Since its inception in the 1970s, remediation itself has evolved into a full-fledged industry. Organizations engaged in environmental construction activities typically execute remediation projects. In ...

  • Better health for all

    Ensuring basic health care for people in low-income countries is critical to the Plan B goal of eradicating poverty and stabilizing population. While heart disease and cancer (largely the diseases of aging), obesity, and smoking dominate health concerns in industrial countries, in developing countries infectious diseases are the overriding health concern. Besides AIDS, the principal diseases of ...


    By Earth Policy Institute

  • Sources and levels of potentially toxic elements in the biodegradable fraction of autoclaved non-segregated household waste and its compost/digestate

    Waste that reflected the average UK composition of household waste was treated by autoclaving at the three set pressure/temperature levels of 2.7 bar/130 °C, 6.2 bar/160 °C and 15.5 bar/200 °C. The biodegradable fraction of the autoclaved household waste ('floc') was manually separated by screening and underwent characterization for its Cd, Cr, Cu, Pb, Hg, Ni, and Zn content. Autoclaving did not ...


    By SAGE Publications

  • LIMS and the Automation of the Water Lab

    (Reproduced by permission from Laboratorium Magazine) Europe’s most modern water lab is located in Leeuwarden, in the Netherlands. Vitens made a big splash when it brought this modern building, with its transparent design, into operation in January 2005. Many colleagues from Dutch and foreign labs are eager to visit this installation, where water control samples are routed automatically with the ...


    By STARLIMS Corporation

  • Cementatious Considerations for Medical Waste Solidification

    The most common cause for alarm in the medical field pertaining to waste disposal is the exposure of the worker to infectious wastes and contraction of diseases from these wastes. With the increased risk of exposure to blood borne pathogens in handling body fluids and disposal of items that have been tainted by these fluids, ...


  • Conventional and Alternative Technologies for the Treatment of Infectious Waste

    Abstract The limited scientific information about infectious waste, and the heightened public awareness of this special component of the waste stream, have contributed to the implementation or strengthening of the regulations in this area. This paper proposes a general working definition of infectious waste, and describes the systems used to limit its potential occupational and public health ...


    By Springer

  • Cementatious considerations for medical waste solidification - safety online

    The most common cause for alarm in the medical field pertaining to waste disposal is the exposure of the worker to infectious wastes and contraction of diseases from these wastes. With the increased risk of exposure to blood-borne pathogens in handling body fluids and disposal of items that have been tainted by these fluids, awareness and education for the prevention of percutaneous wounds is the ...


  • Cementatious considerations for medical waste solidification - infection control

    The most common cause for alarm in the medical field pertaining to waste disposal is the exposure of the worker to infectious wastes and contraction of diseases from these wastes. With the increased risk of exposure to blood borne pathogens in handling body fluids and disposal of items that have been tainted by these fluids, awareness and education for the prevention of percutaneous wounds is the ...


  • A hot chance: exhaustive anaerobic digestion of “grey waste” under temperatures of pasteurization

    According to German laws municipal residual refuse MRR (biowaste, paper and glass are collected in separate bins) must be nearly mineralized before it will be deposited in a landfill, since this material can still contain 20 - 50 % biogenous organic matter leading to gaseous and liquid emissions. Especially the high-organic sieve fraction of MRR below 40 - 60 mm and with a thermal energy content ...


    By ORBIT e.V.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you