Only show results in USA? Ok

Waste Streams Applications

  • Premium

    Anaerobic water purification systems for distilleries

    Water sustainability has become a significant issue for FMCG companies. Many companies publish information on their water usage and are committed to reducing their carbon and water footprints. Paques’ technologies for treating water and gas can significantly contribute to this aim.

    By Paques Technology B.V. based in EL Balk, NETHERLANDS.

  • Metal finishing wastewater solution

    Metal finishing wastewater is a common application for ENCON Wastewater Evaporators. There are many types of wastewater generated in metal finishing. These include vibratory / tumbling wastewater, stamping wastewater, die casting wastewater and polishing wastewater. Metal Finishing wastewater cannot be simply flushed down the drain. Many companies choose to avoid the headaches of labor-intensive wastewater treatment technologies such as chemical treatment or filtration and simply pay to haul the wastewater. This...

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Plating rinse wastewater solution

    Plating rinse wastewater is one of the most common applications for ENCON Wastewater Evaporators. Wastewater from plating rinse tends to be rather corrosive. The chemistries used in the plating process can include a wide range of acids such as nitric acid, chromic acid, hydrochloric acid, sulfuric acid, hydrofluoric acid, as well as other non-acid chemistries like ammonium bifluoride and nickel sulfamate. Typically, the waste stream has a transparent, relatively clean look because they are dilute and the contaminan...

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Zero Liquid Discharge wastewater solution

    Zero Liquid Discharge (ZLD) describes a process that completely eliminates liquid discharge from a system. The goal of any well-designed ZLD system is to minimize the volume of wastewater that requires treatment, process wastewater in an economically feasible manner, while also producing a clean stream suitable for reuse elsewhere in the facility. Interest in ZLD technology has grown in the industrial manufacturing sector over the past decade. Companies may begin to explore ZLD because of ever tightening wastewater...

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Ink, Paint, and Glue wastewater solution

    Ink, Paint, and Glue wastewaters are some of the toughest wastewaters to deal with due to their tendency to coat functional components of the wastewater treatment equipment. This type of wastewater is typically treated in the ENCON Drum Evaporator. Qualification of the waste stream for the Drum Evaporator is performed via a bench scale test in the ENCON laboratory.

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Parts cleaning wastewater solution

    Parts cleaning wastewater is a common application for ENCON Wastewater Evaporators. Parts cleaning is almost entirely water-based since the Montreal Protocol forced companies to abandon chlorinated fluorocarbons (CFC’s) and solvent degreasers. The wastewater is generally brownish gray and translucent with a soapy appearance. It may have trace settled solids and floating oil.

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Spent coolant wastewater solution

    Waste coolant or spent coolant wastewater is one of the more common applications for ENCON Wastewater Evaporators. The most common type of coolant is made up of water-soluble oils, but water-soluble synthetics or semi- synthetics are also used. The coolants are used to cool the tool and part to minimize overheating during machining and grinding applications. The coolant is collected in sumps and continuously recirculated. In time, the coolants break down and become less effective. The coolants, now spent, must be...

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Air scrubber wastewater solution

    Air Scrubbers strip out contaminants from exhaust stacks typically by trickling a stream of salt solution through a bed of media to extract contaminants by putting them into solution. The salts found in these solutions are typically sulfates, chlorides, and carbonates. Air Scrubber wastewater tends to have high total dissolved solids (TDS) or salts. Air Scrubber Wastewater cannot be simply flushed down the drain. Many companies choose to avoid the headaches of labor-intensive wastewater treatment technologies...

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Industrial solutions for water reuse optimization

    Problem: With rising water costs, greater water scarcities and increasing environmental compliance regulations, reuse of water is becoming widely practiced in the manufacturing industry. For most industries, some form of treatment is required to ensure water meets standards for reuse.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Advanced resource recovery & purification solutions for hydrometallurgy sector

    Eco-Tec Recovery Systems offer a simple, economical approach to purifying acid bleed streams, allowing their recycle and reuse. The separated metals can then be cost effectively reclaimed following acid-purification treatment. For years, electrorefining and electrowinning operations wishing to produce high-purity copper have relied on Eco-Tec’s Systems to continually remove metal impurities from copper and zinc electrolyte bleed streams. The purified acid can then be recycled back to the tank house. This...

    By Eco-Tec Inc. based in Pickering, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you