Waste to Energy Applications

23 Results found
Only show results available in Virginia?
OK
  • Category: Waste & Recycling ×

  • Subcategory: Waste to Energy ×

Biogas for Cooking

by Kirloskar Integrated Technologies Limited     based in Kothrud, INDIA

This solution comprises a Biogas Digester of desired capacity working with specific substrate as input. It may or may not have H2S scrubbing system, depending on the quantity of H2S in the biogas and the requirement by the customer for cleaning it. As the heating value of biogas is almost half that of cooking LPG, specially designed biogas burners are provided to improve cooking speed. Depending on the demand by the customer, a blower to increase gas pressure may be employed.

Waste shredding for the waste-to-energy industry

by Metso Recycling Equipment     based in Duesseldorf, GERMANY

With worldwide focus on recovering the maximum waste-to-energy possible, waste processing is an important growth market for stationary shredder technology. Numerous technologies now exist to produce fuels and energy from waste. Incineration is the most common waste-to-energy conversion but to maintain a consistent flow, increase combustion efficiency and reduce costs, it is essential that the waste is pre-shredded.

Coal pulverizing for the coal industry

by Columbia Steel Casting Co., Inc.     based in Portland, OREGON (USA)

Columbia Steel has established itself as a manufacturer of quality replacement parts for coal pulverizers and ash crushers used in power plants.

Energy from biogas and natural gas for the waste to energy industry

by Dreyer & Bosse Kraftwerke GmbH     based in Gorleben, GERMANY

You are a farmer/entrepreneur and would like to make money from generating electricity and heat? Then you have come to the right place. Within just a few years Dreyer & Bosse Kraftwerke GmbH have advanced to become one of the leading manufacturers of combined heat and power stations on biogas basis - we have available a complete product portfolio for energy applications of biogases or biomethane.

Waste shredding for the waste and recycling industry

by WEIMA     based in Ilsfeld, GERMANY

WEIMA makes waste valuable! No matter if it is industrial waste, bulky waste, production waste, rejects, paper, wood waste, textiles or carpet. WEIMA delivers the optimum results, winning secondary resource recovery by delivering correct size reduction. WEIMA shredding solutions are designed for every stage of process tailored to your individual needs.

RDF/SRF shredder

by UNTHA Shredding Technology     based in Kuchl, AUSTRIA

UNTHA shredding technology is offering reliable RDF/SRF shredder with high throughput.

Waste recovery for energy & utilities

by Tetronics (International) Limited     based in Swindon, UNITED KINGDOM

In order to stay competitive and to be seen as being environmentally responsible, energy and utility companies are always looking for alternative routes to generate power. One method of doing this is by leveraging waste to energy incineration plants linked to the processing municipal solid waste. During this incineration process, APC residues, which are a mixture of fly ash, organic pollutants (including dioxins and furans), are generated and are classified as hazardous waste and have a detrimental environmental impact. This fly ash is subject to Air Pollution Control as it is contaminated with extremely high concentrations of heavy metals and toxic compounds like dioxins, linked to cancer and other health problems. Tetronics offers valuable waste recovery plants that can eliminate the hazardous element within the fly ash while generating an inert building aggregate with the remaining material.

Humid, corrosive and malodorous waste gases

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

CTP's expertise with different coating systems, and an energy-saving pre-heater, protect the installation from corrosion even when waste gases are humid.

tyre pyrolysis plant

by RESEM Group     based in shangqiu, CHINA

Scape Tire Pyrolysis Plant Capacity:5-100 tons Tyres per day, Output quantity:35-45% oil, 30% carbon Black, Only need 3 workers.

Biogas to Compressed Bio-methane

by Kirloskar Integrated Technologies Limited     based in Kothrud, INDIA

For the sake of demonstration of the concept, a compressed Bio-methane solution can be supplied for as low as 5 m3 methane per hour. However, considering the cost of the plant, it becomes economically viable only above 6,000 m3 biogas per day capacity, which translates to approximately 2,400 kg bio-methane per day.

Recycling equipment for waste-to-energy recycling

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Granutech has products that are well suited to process materials with the ultimate goal of producing energy from waste.

Flow measurement in turbine intake for power plants

by NIVUS GmbH     based in Eppingen, GERMANY

Application: Rectangular channel 7.8 x 2.0 m (w x h). Part filled. Concrete walls due to bridge. Natural bed.

Recycling Equipment for Waste to Energy

by Bollegraaf Recycling Machinery BV     based in Appingedam, NETHERLANDS

Create high-value RDF with MSW and C&I waste; Optimising the output in terms of economic value and against the lowest possible costs per tonne is the short-term goal for every single system that Bollegraaf provides. The benefits: permanently low operating cost and lowest cost per tonne. The result: fast return on investment.

Supervision of Photovoltaic Power Plants in Japan

by K&S Ingenieurpartnerschaft Krug & Schram     based in Munich, GERMANY

The team of K&S technical experts perform independent technical inspections of the photovoltaic system and clarifies technical issues. The advisory service begins even before the actual construction of the photovoltaic power plant - in the design and contract review. It is ensured that all the requirements of the building permit of the relevant Japanese authorities are fulfilled and the contract is aligned with the system. Based on the continuous construction and factory acceptance tests of components, possible quality defects from the start can be reduced to an absolute minimum. With the local networks of the Japanese technology institutions such as New Energy and Industrial Technology Development Organization (NEDO), Japan Electrical Safety & Environment Technology Laboratories (JET), Japan Photovoltaic Energy Association (JPEA) and other leading technology institutions, K&S combines a comprehensive local technical advisory service in Japan.

Need help finding the right suppliers?

Let the XPRTs do the work for you