Waste to Energy Equipment

1091 Results found
Only show results in Virginia?
OK
  • Category: Waste & Recycling ×

  • Subcategory: Waste to Energy ×

Plasma-assisted Sludge Oxidation (PASO)

by Fabgroups Technologies Inc.     based in Saint Laurent, QUEBEC (CANADA)

Fabgroups Technologies Inc. has a licensing agreement with Hydro Québec to develop, manufacture and market a rotary kiln equipped with an electric plasma torch. Plasma-assisted sludge oxidation (PASO) is an emerging technology that can be used to process organic sludge from a variety of sources. This energy-efficient technology, which ...

Model WT5 - Wood Waste Heater Unit

by Wood Waste Technology Ltd     based in Stafford, UNITED KINGDOM

The WT5 is the smallest of the double pass heat exchange models and is a fully exempt appliance to burn chipboard, MDF, hardwood and softwood off-cuts without the need of a costly afterburner, even in city centres and built up residential areas. With a full refractory lined firebox and highly efficient double pass heat exchange with fully welded ...

Model WT10 - Wood Waste Heater Unit

by Wood Waste Technology Ltd     based in Stafford, UNITED KINGDOM

The WT10 is the middle unit of the double pass heat exchange models and will produce 300,000btu/hr of warm air, enough to heat a workshop of up to 7500ft². Once again the WT10 is fully compliant with the clean air act without an oil or gas afterburner. As with all the WT range these units are the most robust, heavy duty heaters available in ...

JFE - Model Hyper Z Series - Waste to Energy Plants

by JFE Engineering America Inc.     based in Long Beach, CALIFORNIA (USA)

JFE Engineering reviewed waste to energy plant technology and prices in all stages from the design, construction to operation and finally established a brand “Hyper Z Series' with both high performance and life cycle cost reduction. In pursuit of the Hyper Z Series, we optimized specifications, standardized of equipment and made an ...

Material Recovery Facility

by Zero Waste Energy, LLC.     based in Lafayette, CALIFORNIA (USA)

Zero Waste Energy’s team members have been closely involved in the design, development and operation of Material Recovery Facilities (MRF) for processing Municipal Solid Waste (MSW) since the introduction of MRFs in the mid-1980s.  They understand how fully automated MSW Sorting Systems can provide a significant enhancement to ...

AFC2 Anaerobic Process

by PMC BioTec Company (PMCB)     based in Exton, PENNSYLVANIA (USA)

Developed for Agricultural, Food processing, and most types of organic wastes, the Advanced Fluidized Composting & Co-generation (AFC2) system utilizes the anaerobic version of the AFC process to convert organic waste from a disposal problem to a profit-generating resource. The process can achieve over 90% conversion of organic waste into ...

Ad Rem - Plastic Separator

by AD REM N.V. (Valtech Group)     based in Menen, BELGIUM

Each year, millions of tons of plastics end up in landfill. Not only is this damaging for the environment, you also throw away a valuable commodity.

ERS - Material Recovery Facilities (MRF)

by Eco Recovery Systems Inc     based in St. George, UTAH (USA)

ERS provides recycling systems that have been tried and proven for nearly 4 decades. Our goal to lead the industry is reason for continuously making improvements to existing equipment and developing new equipment to better handle the increasing market demands. ERS provides customized needs based solutions for our clients.  We have a complete ...

Model WT2 - Wood Waste Heater Unit

by Wood Waste Technology Ltd     based in Stafford, UNITED KINGDOM

The WT2 is the entry level unit and a very popular choice for the smaller workshop. The small footprint, ease of installation and being virtually maintenance free make it the obvious choice for workshops up to around 2500ft². Manufactured using the same high quality materials as the larger WT range of heaters means the customer gets ...

Menart - Tailor-made Units for Waste Recycling Plants

by MENART     based in Dour, BELGIUM

The MENART's recycling solutions are based on proven techniques, acquired thanks to our long experience in this domain.

Exergy - Flue Gas Dryer

by Swedish Exergy AB     based in Gothenburg, SWEDEN

The Exergy Flue Gas Dryer was developed to meet the needs of the industry for the utilisation of latent heat in flue gases from boilers. The dryer consists of feeding and discharge equipment, a separation cyclone and specially designed drying conduits. The bio-mass is fed in hot flues gas stream and gets in direct contact with flues gases. The ...

Model O - Industrial Package Watertube Boiler

by English Boiler & Tube, Inc.     based in Richmond, VIRGINIA (USA)

English Boiler offers the “O” type design along with several other standard boiler designs. Our “O” type design has the capability to reach steam outputs of up to 250,000 PPH with pressures up to 900 psi. “D” type boilers are limited in their shop assembled capacities due to shipping constraints. The ...

Waste Heat Recovery Systems

by heat 11 GmbH & Co. KG     based in GERMANY

Do not let your money go up the chimney! Make best use of the waste heat in order to increase the energy efficiency of your plant. From the hot water preparation via the process heat supply to power generation - we find the optimum solution.

Multi Effect Distillation

by AquaSwiss AG     based in Frauenfeld, SWITZERLAND

Low temperature multi effect distillation is a simple, reliable and efficient process utilizing low cost / low grade heat or waste steam. Vacuum enables operation at unparalleled low distillation temperatures (below 70 °C) minimizing scale and corrosion, and hence maintenance, to an absolute minimum. A large number of effects consequently ...

Waste to Heat System

by International Composting Corporation (ICC Group)     based in Victoria, BRITISH COLUMBIA (CANADA)

ICC’s Modular Energy System ('MES') are designed to convert organic waste from food, yard & garden, wood, construction and demolition, etc., into Green Energy (heat & electricity). The conversion from waste to energy takes place through a series of steps.

Model 2248 - Vertical Compactors

by Compactors Incorporated     based in Hilton Head Island, SOUTH CAROLINA (USA)

The Model 2248 Vertical Compactor compacts directly into 64 gallon wheeled cart. It reduces cost through waste reduction and recycling. Safe and easy to operate. No lifting or double handling. Space saving and energy efficient. Achieves as much as 6:1 compaction. Patently safe and simple to operate. Can be mobile. Minimum space requirements.

KIV - Waste to Energy System

by KIV     based in Vransko, SLOVENIA

The system's main characteristics are - smaller specific costs per unit, optimal heat efficiency, small operational and maintenance costs, with full automation of the process, great environmental acceptability, reconciliation with the regulations of the most demanding countries, such as the countries of the EU.

EnviWaste - Our Waste to Energy Plants

by EnviTec Biogas AG     based in Lohne, GERMANY

Every farm or food enterprise generates by-products which are eminently suited to biogas production. The targeted utilisation of organic waste can help generate energy and heat. This lowers overall production costs and is also good for the environment. In short: what you would normally dispose of is a valuable source of energy.

CTP - Multi Fuel Burners

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

Multi Fuel Burner: Multi fuel burners can be employed in a wide range of applications for gaseous and fluid combustibles, or liquid waste with a high combustion heat level.

Secondary Fuel Production

by econ industries GmbH     based in Starnberg, GERMANY

Applications and design Process: Fuel preparation for cement kilns and power plants. Source: Mixed hazardous wastes from various origins with caloric value. Hydrocarbon and solvent based sludge, food industry waste. Full/empty metal drums and plastic containers. Polluted wood/pallets, e.g. with painted surface Plastic packing waste and textiles, ...

Need help finding the right suppliers?

Let the XPRTs do the work for you