We couldn't find any waste transfer applications suppliers or service providers located in Virginia
Here is a list of applications results with suppliers serving Virginia
Waste Transfer Applications available in Virginia
-
Premium
High-quality shredding solutions for green waste disposal & recycling shredding sector
Green waste disposal and recycling can be difficult without the proper preprocessing tools, especially in large volumes. Everything from lawn clippings to leaves, food, animal-based materials, and other organic materials can be considered green waste, and these types of waste can find their way into landfills and take up a considerable amount of space. If left alone many of these waste products can rot and decay to produce dangerous levels of methane gas, which can put workers and operators at risk. In order to ...
By 3R-Machinery (by Shred-Tech) based in Raleigh, NORTH CAROLINA (USA).
-
Balers And Waste Compactors for Hotels and Restaurants Industry
One of the top priorities of all hotels and restaurants is to look clean and attractive and effective waste handling is the key factor here. Install our compaction systems in vital areas throughout your ...
By Orwak AB based in Sävsjö, SWEDEN.
-
Containers for solid hazardous materials
Bins for disposal of solid materials harmful to the environment such as cleaning rags and wipes, paints, granulates, binders for oil and chemical ...
By P. Henkel GmbH based in Kreuztal, GERMANY.
-
Industrial wastewater solutions for meat processing sector
Meat Processing Equipment: JWC offers a variety of meat processing equipment and assists in meat processing wastewater. Meat processing facilities produce wastewater with heavy loads of fats, oils, grease and solids. Before sending that water down the sewer drain, pre-treatment is required to remove as much of these solids as possible. Devising the most cost-effective treatment process is where facilities directors stand to make the most meaningful impact on their bottom line. The right combination of equipment, ...
By JWC Environmental based in Santa Ana, CALIFORNIA (USA).
-
Heavy Metal Contaminated Soil Fixation
If the contaminated soil exceeds the TCLP limits, stakeholders should be aware that remedial applications, such as Blastox 215® exists that can be added directly to the soil to render it non-hazardous. This significantly drives down the cost of soil remediation disposal as hazardous waste transportation and hazardous waste disposal are avoided, allowing for local, non-hazardous waste disposal. Because of its effectiveness, Blastox 215® had been used successfully on thousands of tons of heavy metal contaminated ...
By The TDJ Group, Inc based in Barrington, ILLINOIS (USA).
-
Shopping Malls / Retail Shops
Shopping malls and retail shops can create a large amount of waste. Most of this is packaging material such as plastic, paper and cardboard that has to be recycled. The installation of an Envac vacuum system can ensure that the handling of this waste becomes ...
By Envac AB based in Stockholm, SWEDEN.
-
Recycling Systems for the municipal solid waste processing sector
MACPRESSE products revolutionized the way the solid waste is transferred and processed.Used in different environments, our machines innovate and optimize the traditional process of waste disposal. In fact, different materials such as municpal solid waste is treated and compacted before transferring them from the transfer stations to landfill sites. This way, there’s no risk of land contamination and bad-smelling liquid formation – attracting vermin –when waste is not pre-treated ,collected in ...
By Macpresse Europa S.R.L based in Vernate, ITALY.
-
Engineered clean air solutions for lean manufacturing applications
Whether you call it lean manufacturing or Just-in-Time (JIT) manufacturing, eliminating waste isn’t a new concept for bottom-line minded manufacturers. But, it isn’t easy to reduce operating costs while creating more value for your customers. This is especially the case for welding, sanding, painting, or other processes that produce harmful air contaminants and create production bottlenecks for larger construction projects. What if you had a portable, clean air solution to protect your employees from ...
By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).
-
Handling hospital waste and laundry
Large amounts of hazardous waste, contaminated waste and dirty laundry are handled in modern hospitals, and so hygiene and staff safety are important. This is why it is important to find sustainable waste solutions which do not require waste to be physically touched. This is achieved with the Envac vacuum ...
By Envac AB based in Stockholm, SWEDEN.
-
Waste handling in nursing homes
Large amounts of hazardous waste and contaminated waste are handled at modern nursing homes, and so hygiene and staff safety are important. This is why it is important to find sustainable waste solutions which do not require waste to be physically touched. This is achieved with the Envac vacuum ...
By Envac AB based in Stockholm, SWEDEN.
-
Vacuum systems in residential areas
As waste volumes continue to grow, more and more stringent demands are being made of waste handling with regard to hygiene and the environment. The Envac vacuum system for waste handling in residential areas is a long-term investment offering both financial and environmental benefits, as well as other added ...
By Envac AB based in Stockholm, SWEDEN.
-
Engineered clean air solutions for marine applications
You already know there’s no such thing as simple one-piece flow when it comes to boat building and repair. Larger pieces must be built in place and smaller subsystems, pipelines, and foundations are usually brought to the site. For smaller crafts, hulls and decks must be moved between workstations, usually via overhead ...
By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).
-
Fly Ash - Industrial Vacuum
Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit ...
By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).
-
Instrumentation technologies for refineries
The petroleum refining industry uses a wide range of processes, from separation, petroleum conversion, and petroleum treatment to waste water management. Each of these processes has its own challenges and all are made more complex by the variety of products and contaminants in the process. Two key areas, from the water management perspective, are cooling water and waste water treatment. ...
By Advanced Sensors Ltd. - part of PAC L.P. based in Carrickfergus, UNITED KINGDOM.
-
Balers and Waste Compactors for Warehouses and Logistics Centers
Warehouses and distribution centers are often very large, consisting of multiple floors and even multiple buildings. Waste transport and handling can be a huge challenge in these types of environments and the key factor is to organize the waste handling ...
By Orwak AB based in Sävsjö, SWEDEN.
-
Food Waste Recycling, Reduction or Disposal Systems for Education Sector
Multi Site University Campus: Leading the curve, Universities in particular were among the first sectors to realise the importance of dealing with food wastes and as early as 2006 the Universities took to Rocket in vessel composting and food waste dewatering. With multi campus applications and the importance of cost saving through the bulking together of wastes, bringing food wastes into a centralised process made most sense. Each of the campus refectories taking on Dehydra food dewatering systems to minimise the ...
By Tidy Planet Limited based in Macclesfield, UNITED KINGDOM.
-
Neutralization Mobile System for Residual Matter and Waste
The various stages of waste management can cause some problems, as well as odor nuisance for the immediate community. The activities dedicated for transhipment, as well as landfilling, are known to produce strong offensive ...
By Super-F Fragrance Inc. based in L`Assomption, QUEBEC (CANADA).
-
Odor control solutions for solid waste industry
Today in modern society we generate waste and and we generate it in vast quantities. Professionals around the world are dedicated to processing this material as efficiently as possible. Efficient processes and higher population density increase the risk of affecting the quality of life of workers, neighboring communities and the overall ...
By Ecolo Odor Control Technologies based in Toronto, ONTARIO (CANADA).
-
Air Purification Solutions for Wastewater Odor Control
Unpleasant odors can be a problem almost anywhere. ProMark can help you eliminate unwanted odors and create a more comfortable, healthy environment. Common sources of odors include wastewater treatment plants, sewer lift stations that are close to residences, solid-waste transfer stations, nearby manufacturing plants, vehicle exhaust on highways and many ...
By ProMark Associates, Inc. based in Evanston, ILLINOIS (USA).
-
Bins for healthcare waste disposal
Bins for healthcare ...
By P. Henkel GmbH based in Kreuztal, GERMANY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you