Municipal Waste Treatment (Waste Treatment) Equipment In Germany
-
ShowcaseManufactured by MSE Filterpressen GmbHbased in GERMANY
Sludge dewatering in municipal or industrial waste water treatment is classified as complex. Not only the composition of the sludge, but also the economic and technical boundary conditions of the plant vary greatly. The optimal solution can only be reached by analysing the overall situation. Minimising dewatering costs while ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Monitoring and treatment of waste water with DULCOTROL Waste Water – the compact measuring and control system specially designed for applications in municipal and industrial waste water ...
-
Manufactured by Ekofinn Energie- & Wassertechnik GmbHbased in GERMANY
EKOFINN utilizes SCRUDRAIN Sludge Thickeners for municipal and industrial waste water treatment plants to increase the capacities and achieve better dewatering results with MONOBELTBelt Filter Presses. The prethickener increases the dry substance content (DS) – depending on type of sludge – from 1 % up to 5 to 8 ...
-
by Waterleaubased in BELGIUM
BIOTON biofilter is Waterleau’s proprietary technology for the treatment of polluted air containing nitrogen or sulphur-based compounds. This technology was acquired from MECS / CLAIRTECH. The BIOTON biofilter utilizes a fixed bed of a well-defined suitable mixture of inorganic / organic media, which contains the micro-organisms ...
-
Manufactured by ProMinent GmbHbased in GERMANY
5-50 kg/h of dry PAC with a re-dilution of 3-5 m3/h and a final concentration of max. 1%. Conventional waste water treatment cannot adequately remove trace elements, such as medication or cosmetic residue from the waste water. This is particularly effective using the complete system for the precise metering of powdered active carbon ...
-
Manufactured by Harbauer GmbHbased in GERMANY
Sludge with lower viscosity is produced in a multitude of processes e.g. municipal wastewater treatment, lake decontamination, various flocculation processes and industrial water treatment as well as food and beverage industry. The sludge needs to be disposed of, which necessitates sludge ...
-
Manufactured by Ekofinn Energie- & Wassertechnik GmbHbased in GERMANY
The DRAIMAD / TEKNOBAG bags dewatering system was developed for municipal and industrial waste water plants less than 3.000 people equivalent (p.e.). Waste water plants of this size normally only have the option to dispose of waste at very high cost. This economical technology can dewater up to about 160 kg dry solids of ...
-
Manufactured by Likusta Umwelttechnik GmbHbased in GERMANY
Microporous structure allows high adsorption rates; Activated carbon is fine-grained carbon with a highly porous structure and a very large surface. It is used industrially for eliminating unwanted harmful substances or odours from gases, vapours and liquids or for the recovery of residues. The substances are bound to the activated carbon by adsorption. Activated carbon is used as a powder, ...
-
Manufactured by Ekofinn Energie- & Wassertechnik GmbHbased in GERMANY
For the continuous dewatering of large quantities of sludge EKOFINN uses the innovative MONOBELT® belt filter presses for applications all over the world with great success for municipal and diverse industrial waste water plants. The dewatering machine convinces through its unique design and combination of prethickener and a belt press ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
and municipal waste water treatment plants that are covered by the UV400 and UV500 ...
-
Manufactured by Vaisalabased in FINLAND
into the gas line without the need for sample treatment. The measurement probe is suitable for applications such as anaerobic digestion of landfill, industrial and municipal waste, wastewater treatment, CHP engine monitoring, as well as active carbon filter ...
-
Manufactured by Cantelbased in USA
MinncareCold Sterilant is a peracetic acid solution developed for use on reverse osmosis (RO) membranes and their associated distribution systems. Peracetic acid formulations were developed by Minntech Corporation in 1976 and are currently being used in a wide variety of applications. Mar Cor Purifi cation distributes Minncare Cold Sterilant to the Medical, Pharmaceutical and Industrial ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
Tethys Differential pH Sensor with 1 ½”NPT thread on both front & back is a heavy-duty pH probe with Ryton Polyphenylene Sulfide body suitable for many industrial water application. The differential design provides unsurpassed accuracy by virtually eliminating ground loops. Mounting thread on both front and back allow for in-pipe (continuous measurement) or submersible ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
Tethys Conductivity Sensor with ¾”NPT thread is a heavy-duty probe with Polypropylene body suitable for many industrial water application. Mounting thread allow for in-pipe (flow through) installations of conductivity sensor. These conductivity sensor offers excellent chemical and impact ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
Tethys Chlorine Sensor is based on proven amperometric measurement technology. It is factory calibrated and zero calibration is not required. It’s long life membrane cap is replaceable with refillable gel electrolyte. It is suitable for measurement of residual chlorine (free or total) in various Industrial water and waste water ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
water and waste water ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
Tethys General Purpose ORP Sensor with ¾”NPT thread on both front & back is a heavy-duty ORP probe with Ryton body suitable for many industrial water applications. Mounting thread on both front and back allow for in-pipe (continuous measurement) or submersible installations of ORP Sensor. This ORP sensor offers excellent chemical and impact ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
Activated Sludge (RAS), Waste Activated Sludge (WAS), clarifier effluent and plant ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
is suitable for measurement of dissolved oxygen measurement in various water and waste water ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
Tethys General Purpose pH Sensor with ¾”NPT thread on both front & back is a heavy-duty pH probe with Ryton body suitable for many industrial water application. Mounting thread on both front and back allow for in-pipe (continuous measurement) or submersible installations of pH Sensor. This pH sensor offers excellent chemical and impact ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you