Waste Treatment Equipment in Germany

119 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Waste & Recycling ×

  • Subcategory: Waste Treatment ×

  • In: Europe ×

  • In: Germany ×

Composting Plants

by Taim Weser S.A.     Office in Bad Oeynhausen, GERMANY

Source segregated bio waste and in addition a certain amount of green waste is being transformed to compost and bio fertilizer by proven treatment systems. We are competent in all composting technologies (open and closed windrow, tunnel box and in line composting systems) and combine process engineering and mechanical treatment technologies into ...

BioSal - Model MBA - Dynamic Intensive-Biological Composting Technology for Waste Treatment Plants

by BioSal Anlagenbau GmbH     based in Bad Lausick, GERMANY

Compact and future-oriented design. Low energy requirement by automatic plant operation. Reliable hygienisation and degration of biogen input material. Only 7 to 10 days intensive rotting time (in dependence on input material). self-sufficient operability of each BioSal-DYN makes incremental plant investments possible depending on the required ...

AQUABATE (wet) - Point-of-Use Waste Gas Scrubber System

by DAS Environmental Expert GmbH     based in Dresden, GERMANY

The AQUABATE product line completes DAS´waste gas treatment portfolio. The well proven solution is a pure wet scrubber technology for efficient abatement of water-soluble harmful substances from process waste gases. The gas scrubber is employed mainly in the semiconductor industry, as a Point-of-Use (POU) wet treatment system. Installed ...

Atec - Waste Water Treatment Technology

by Atec Automatisierungstechnik GmbH     based in Neu-Ulm, GERMANY

In the field of industrial waste water treatment Atec focuses on highly polluted waste water. Among others Atec systems have been installed especially in the following industries: Metalworking industry, Solar cell production, Chemical and farmaceutical industry, Watchmaking industry, Food and beverage industry, Winery and brewery, Landfills.

VacuDry - NORM Waste Treatment

by econ industries GmbH     based in Starnberg, GERMANY

Typical input material for this type of plant is N.O.R.M. waste/sludge from the natural gas industry. This plant is specially designed for the treatment of mercury contaminated sludge including NORM radioactive natural gas. The plant is designed as a skid-mounted execution for on-site treatment. The prime aim of the thermal processing plant #31;- ...

VacuDry - Vacuum Distillation Process

by econ industries GmbH     based in Starnberg, GERMANY

Greatest benefits of the econ VacuDry technology: Highly efficient thermal desorption is achieved due to a unique vacuum and indirect thermal oil heating system. Recovery of valuable resources rather than incineration. Highest safety and environmental protection standards – due to the vacuum process, nitrogen blanketing and full procedure ...

LARCH (dry burn) - Point-of-Use Waste Gas Treatment System

by DAS Environmental Expert GmbH     based in Dresden, GERMANY

LARCH is our latest Point-of-Use waste gas treatment system especially designed for MOCVD processes. It is capable of treating large flows of Hydrogen and Ammonia as well as small flows of metal-organics and dopants, which are typically found in common LED processes. The treatment combination of oxidation und pyrolysis extends DAS´ ...

SPRUCE (thermal/wet) - Point-of-Use Waste Gas Treatment System

by DAS Environmental Expert GmbH     based in Dresden, GERMANY

SPRUCE is a waste gas treatment system that functions without fuel (thermal/wet) and was specifically designed for waste management of CVD processes in the semiconductor industry. Low cost of ownership and a small footprint characterize the equipment, while access for operation and maintenance from the front and back allow for additional ...

GIANT (burn/wet) - Point-of-Use Waste Gas Treatment System

by DAS Environmental Expert GmbH     based in Dresden, GERMANY

GIANT was specifically developed for treating the larger amounts of waste gases from CVD processes in the photovoltaic and flat panel display (TFT/LCD) industries. Being part of the burn/wet-technology based DAS tools, GIANT is optimized for up to six independent inlets from CVD process tools, runs on diverse fuel gases and scrubber liquids and ...

Fixed Bed Systems

by Environmental Engineering Doellerer GmbH     based in Seefeld, GERMANY

In the field of biological waste water treatment two major systems are available. The different processes are activated sludge systems and biofilm systems. In case of activated sludge systems the sludge settles after the treatment process and the treated water can be discharged. At biofilm systems settles on the surfaces of the bed material and ...

Sequencing Batch Reactors System

by Environmental Engineering Doellerer GmbH     based in Seefeld, GERMANY

The sequencing batch process ist a special variation of the activated sludge process where all treatment processes take place in one tank. A clarifier is not required. The treatment mode is sequenced in different treatment stages.

ESCAPE (burn/wet) - Point-of-Use Waste Gas Treatment System

by DAS Environmental Expert GmbH     based in Dresden, GERMANY

The ESCAPE technology offers an optimum combination of the two operating procedures burning & scrubbing in the smallest possible space. A concept many DAS systems for waste gas treatment use. It is an effective and highly versatile technology for point-of-use waste gas treatment with a low cost of ownership. Based on this burn/wet-technology ...

Moving Bed Reactors System

by Environmental Engineering Doellerer GmbH     based in Seefeld, GERMANY

In contrary to fixed bed systems are in case of moving bed systems the biofilm carrier suspended in the waste water basin. The turbulence is achieved by aeration (aerobic) or mixing by agitators (anaerobic). Biomass removal is achieved by lamella separators or flotation. Besides the advantages simmilar the fixed bed systems always a acessability ...

UPTIMUM (burn/wet) - Process Waste Gas Treatment-System

by DAS Environmental Expert GmbH     based in Dresden, GERMANY

UPTIMUM is a process waste gas treatment-system using burn/wet technology. The product name UPTIMUM refers to the term „Uptime“ underlining the high tool availability. The tool can be applied at different applications.

JUNIPER (electrostatic) - Electrostatic Condensate Separator

by DAS Environmental Expert GmbH     based in Dresden, GERMANY

The electrostatic condensate separator JUNIPER reliably and cost-effectively removes condensable organic compounds (VOC´s) like those that accrue in manufacturing fabs in the photovoltaic industry. Many of these organic compounds have a bad odor and many of them are toxic. JUNIPER is capable of handling waste gas flows up to 1000 m3/h. ...

Hazardous Waste Treatment System

by AVA - Huep GmbH u. Co. KG     based in Herrsching, GERMANY

AVA has developed systems for pre-treating hazardous waste prior to incineration, which leads to higher throughput performance in combination with lower construction and maintenance costs and additional low pollution emissions, in comparison to conventional techniques. The system is based on the principal that constant gross calorific values and ...

STYRAX (burn/wet) - Waste Gas Treatment System

by DAS Environmental Expert GmbH     based in Dresden, GERMANY

STYRAX, a DAS tool family for process waste gas abatement using burn/wet technology, is one of the latest developments within our waste gas treatment portfolio. It was specifically developed to manage demanding waste processes like CVD processes in the semiconductor and photovoltaic industries. Longer maintenance cycles increase the system’s ...

ENVICONT - Model C400 - Composting + Municipal Solid Waste Treatment

by EnviCont Technology     based in Dresden, GERMANY

Avoidance of emissions, smells and seepwater. Production of hygienically perfect and high quality composts.

ENVICONT - Model C900 - Composting + Municipal Solid Waste Treatment

by EnviCont Technology     based in Dresden, GERMANY

Very small space requirement. No building permit necessari (smal plant).

ENVICONT - Model C2000 - Composting + Municipal Solid Waste Treatment

by EnviCont Technology     based in Dresden, GERMANY

Flexible adjustment of the recycling capacity. Small acquisition or leasing costs.

Need help finding the right suppliers?

Let the XPRTs do the work for you