Waste Vacuum Equipment For Waste And Recycling Available In Montana
-
Manufactured by Raetts Rui Tian Electrical Technology Co.,Ltd.based in CHINA
The impellers in the air blower are mounted directly on the motor shaft for noncontact compression entirely without friction. Maximum operational reliability, even at high differential pressure is ensured by the arrangement of the bearings outside the compression chamber. The gas it has taken in through the inlet 1 channel 2. As it enters the side, the rotating impeller 3 imparts velocity to the ...
-
Manufactured by China Excellent Vial Factorybased in CHINA
1 Size: cylinder 300*100*188mm or 300*100*228mm( (L * W * H); 2 hole number: 19; 3 hole spacing: 27mm; 4 hole height and arrangement: upper and lower cross (front row height out of the panel 10mm, rear panel 20mm), front and back row cross not parallel; 5 waste disposal: at the bottom of the cylinder can be used to collect waste liquid, or during the vacuum, waste can be automatically collected ...
-
Manufactured by General Plastics Manufacturing Co.based in USA
FR-3700 is a CFC-free, rigid, closed-cell, flame-retardant polyurethane foam available in densities ranging from 3 to 40 pounds per cubic foot. It exhibits a high strength-to-weight ratio due to its cellular structure and cross-linked resin. Because of its closed-cell structure, LAST-A-FOAM FR-3700 has great resistance to water absorption, and will not swell, crack, or split on exposure to water. ...
-
Manufactured by EcoHog Ltdbased in UNITED KINGDOM
Utilise the air separation power of the EH-81 Airhog anywhere with the generator powered HSB-81. The self-powered Ecohog HSB-81 Airhog vacuum air suction separator combines a 20kVA generator into the existing EH-81heavy duty suction fan design. ...
-
Manufactured by Dekker Vacuum Technologies, Inc.based in USA
Dekker Vacuum AquaSeal systems are available in capacities from 15-39,000 CFM and can be offered in a wide variety of materials for tough applications. AquaSeal no recovery systems operate as the name implies: water fed to the pump is discharged down the drain or used for another ...
-
Manufactured by Tuthill Corporation - Tuthill Vacuum & Blower Systemsbased in USA
CVP Central Vacuum Systems provide a remote supply of plant vacuum which can be located away from the production area or vacuum outlets, thus reducing noise and heat in the work area. The systems feature the “A” Series single-stage liquid ring pumps in either a simplex (one pump) or duplex (two pumps) design. The energy-efficient systems are designed to operate automatically, with the ...
-
Manufactured by Körting Hannover AGbased in GERMANY
The system shown in the sketch achieves a suction pressure of 1 mbar. The temperature of the available cooling water determines which pressure can be reached in the first mixing condenser. In this example, two ejector stages have been series-connected to achieve a suction pressure of 1 mbar with the lowest possible use of motive flow. Two further ejector stages compress the non-condensable ...
-
Manufactured by Precision Air Convey Corporation (PAC)based in USA
Automatic trim waste collection increases line efficiency and reduces labor costs. PAC's TrimPAC EZ is an ideal solution for companies that need an affordable and portable trim waste handling solution fast. The TrimPAC EZ vacuums trim waste via an inline material handling fan, through an on-board cyclone and into one of two high-capacity collection bags. These dual collection bags allow ...
-
Manufactured by Pentek Inc.based in USA
The Pentek Knock-Out Drum is the perfect accessory to your HEPA vacuum waste collection scheme. When inserted between the waste and the VAC-PAC, you are assured of trouble-free, automated operation with no downtime and minimum maintenance ...
-
Manufactured by EcoHog Ltdbased in UNITED KINGDOM
Air Density separator – the EH-81 Airhog is your perfect solution. Exceptionally Clean Downstream Material with the Airhog’s Air Separation of waste system. The EH-81 Airhog removes light fraction contaminants such as paper, plastic and foil from heavy applications using a frequency controlled heavy duty fan, air hose and extraction ...
-
Manufactured by AquaSwiss AGbased in SWITZERLAND
Low temperature multi effect distillation is a simple, reliable and efficient process utilizing low cost / low grade heat or waste steam. Vacuum enables operation at unparalleled low distillation temperatures (below 70 °C) minimizing scale and corrosion, and hence maintenance, to an absolute minimum. A large number of effects consequently results in very high economy ratios (product to steam) ...
-
Manufactured by Vilberbased in FRANCE
The Biosthesia system has been especially designed for inhalation of Isoflurane agents to laboratory animals in a research ...
-
Manufactured by Economy Process Solutions Private Limitedbased in INDIA
Our customized vacuum skids solutions are designed to handle the demanding conditions of tough industrial environments. We understand that every operation has unique needs and are able to customize our vacuum systems to meet your specific requirements. In addition to our standard offerings, we also provide economy vacuum systems that can be tailored to your process requirements. These systems ...
-
Manufactured by Crossland Tankers Ltdbased in UNITED KINGDOM
We understand that moving liquid bio-solids, hazardous chemicals, and industrial waste safely and efficiently, is incredibly important for your business, just as it is for your reputation within your ...
-
Manufactured by Wuhan HDC Technology Co., Ltd.based in CHINA
As we know, distillation to base oil is under high vacuum. Continuous distillation is not suitable which can lead to oil foaming and leakage of waste oil. While batch type is low efficient and power-waste. So efficient vacuum distillation equipment adopts high speed centrifuge to separate particals and water from the oil; thin-film evaporator for light oil separation; and then high vacuum ...
-
Manufactured by Pompetravaini Spabased in ITALY
HydroSys represents the best solution for completeness, flexibility and performance in the installation of liquid-ring vacuum pumps with total or partial ...
-
Manufactured by United Chemical Technologiesbased in USA
Complete Universal Vacuum Manifold Includes: Manifold Top and Base. 24 Column Extraction and Collection Plate. 48 Column Extraction and Collection Plate. Vacuum Gauge & Waste Base. Waste Flask. All Necessary ...
-
Manufactured by BOA Recycling Systems B.V.based in NETHERLANDS
BOA shredders are applied to shred waste materials.We have various types of shredders available to reduce for example waste paper,electronic waste and other materials.Our shredders all have the same purpose:effectively crushing and reducing the size of the material for easier further processing and recycling. We have shredders available for two different types of materials:Paper and cardboard ...
-
Manufactured by Unique Systems, Inc.based in USA
Liquid ring vacuum pumps have been employed for removing air from main condenser waterboxes for the past 40 years. In the Waterbox Priming application, vacuum pumps evacuate air and any other non-condensable gases from the cooling water piping and waterboxes of the main condenser that services a steam turbine. Lowering the pressure in the waterbox enables the cooling water to be forced up into ...
-
Manufactured by Chongqing Zanyo Electromechanical and Machinery CO., Ltdbased in CHINA
ZYG Waste Oil Vacuum Distillation Plant is vacuum distillation machine which is recycling various waste industrial oils such as: lubricating oil, engine oil, hydraulic oil, insulation oil, used motor oil, machine lube oil, tire oil, plastic oil etc. Oil Vacuum distillation is the most matured and stable distillation technology and the core technology to recycle waste oil. it has been used ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you