Bilge Monitoring Equipment For Water Monitoring Available In Marshall Islands
-
PremiumManufactured by VEGA Americas, Inc.based in USA
Application area: It detects the limit level reliably and with millimetre accuracy directly at the mounting position. Small level switch version with stainless steel housing. The VEGASWING 51 is a universal level switch with small dimensions for use in liquids. Independent of the mounting position, it detects reliably with millimetre accuracy the limit level. The instrument can be used as empty ...
-
Manufactured by Sokerol International Limitedbased in UNITED KINGDOM
Sokerol Bilge Socks (SOKs) are designed for use in the bilge or bulkheads of any boat, commercial or recreational, power or sail. Bilge Socks (SOKs) are the ideal solution to preventing accidental discharge of oil from your bilge into the local waterways. The Bilge Sock (SOK) will absorb any oil which may find its way into your bilge and encapsulate any oil, fuel or transmission fluid which is ...
-
Manufactured by Deckma Hamburg GmbHbased in GERMANY
5 ppm + 15 ppm Bilge Alarm according to IMO Resolution MEPC.107 ...
-
Manufactured by Shanghai Mutao Environmental Technology Co.,Ltdbased in CHINA
This device can be used to treat oily bilge water in order to make it reach the requirements of IMO.MEPC.107 (49) resolution, which is also called 15ppm bilge separator. It contains type approved 15ppm bilge water separator,15ppm bilge alarm and automatic shut down ...
-
Manufactured by Rivertrace Ltdbased in UNITED KINGDOM
By utilising the “Smart Cell” Detector Array Technology, developed by Rivertrace, the monitor accurately analyses the quality of the sample stream and outputs the turbidity value in nephelometer turbidity units (NTU) Turbidity is the cloudiness or haziness of a fluid caused by large numbers of individual particles. A manual cell cleaning device is included as standard to easily enable ...
-
by Jowa ABbased in SWEDEN
Jowa Oily Water Separator is available in five different capacities; 0.5 m3/h, 1.0 m3/h, 2.5 m3/h, 5.0 m3/h and 10.0 m3/h. The skid is optimised so that the footprint of the 3SEP OWS is as small as possible. The 1m3/h model pictured has a footprint of only 950 x ...
-
Manufactured by Deckma Hamburg GmbHbased in GERMANY
The TMD-90 Turbidity Monitoring Device has been designed specifically for measurement of turbidity (NTU) in water. The TMD-90 has been constructed using technology of the DECKMA HAMBURG OMD series industrial instruments and 15ppm Bilge Alarm Monitors, that have a specification and performance which exceeds the requirements of the International Maritime Organization specifications for 15ppm ...
-
Manufactured by Xylem, Inc.based in USA
When reliability and sensitivity are critical to your system’s operation and safety, look to Xylem to produce a wide range of switch products for a wide array of applications and ...
-
Manufactured by Advanced Sensors Ltd. - part of PAC L.P.based in UNITED KINGDOM
The SA-100/1000 is a side stream Oil in Water analyzer suitable for non-hazardous areas; it uses fluorescence to provide continuous accurate measurements of oil concentrations in water. Reliable real-time data enables operators to take accurate discharge measurements and to improve efficiency of separation processes enabling cost reductions. The SA is ideally suited for marine, industrial and ...
-
Manufactured by SkimOil, LLCbased in USA
The OCD CM is the result of market research and development of new technologies to produce a monitor that exceeds the existing standards and meets the requirements requested by customers and operators worldwide. The OCD CM has been specifically designed to eliminate the effects that cause false instrument alarms where the water contains high levels of solid particulates. In particular the unit ...
-
Manufactured by HSN-Kikai Kogyo Co., Ltd.based in JAPAN
Measuring oil concentration in the treated water of engine room bilge with high precision. It monitors and controls the oil concentration when bilge (Note 1) is discharged from the engine room after being treated by a bilge separator to sea if the discharged bilge satisfies the specified limits by the International Convention for the Prevention of Pollution from Ships. Note 1. Engine room bilge ...
-
Manufactured by Deckma Hamburg GmbHbased in GERMANY
The OMD-2008 EV FC MCU is equipped with a Flow Sensor. The Flow Sensor is positioned in the Drain line of the Measuring Cell. If the flow rate through the Measuring Cell is too low, or if the sample is not flowing at all, the Instrument will go to Alarm condition and issue a “Status: Flow?” message. According to MEPC.107(49) the 15ppm Bilge Alarm has to be provided with a ...
-
Manufactured by RWO GmbH Marine Water Technologybased in GERMANY
The Clean Bilge Monitoring system CBM+ is designed to monitor and control liquid discharges overboard your vessel in respect of its oil content. The system prevents the discharge of non-compliant oily water mixtures by automatically recirculating the liquid to the bilge water tank if the oil content is above a predetermined limit. This compact system can be installed as a last monitoring and ...
-
Manufactured by Rivertrace Ltdbased in UNITED KINGDOM
The SmartSafe ORB (oil record book) Bilge overboard Security System was developed in response to our customers' worldwide requests and requirements. This system records the oily water discharge process of any Oil Water Separator (IMO - MEPC 60.33 or 107.49) thus avoiding the common mistakes of manual entries and log variations in the oil record book. These errors are an easy target for Port State ...
-
Manufactured by Rivertrace Ltdbased in UNITED KINGDOM
By utilising the “Smart Cell” Detector Array Technology, developed by Rivertrace, the OCM analyses all three oil types (HFO, Diesel and Emulsions) simultaneously without the need for re-calibration. A manual cell cleaning device is included as standard to easily enable routine maintenance. Optical cell fouling is recognised as a leading cause of monitor malfunction or incorrect ...
-
Manufactured by Deckma Hamburg GmbHbased in GERMANY
The OMD-24 Bilge Alarm Unit has been designed specifically for use in conjunction with 15 ppm oil-water separator units and has a specification and performance which exceeds the requirements of the International Maritime Organization specifications for 15ppm Bilge Alarms contained in Resolution MEPC. 107 ...
-
Manufactured by KUS USA, INCbased in USA
PBK used is for detecting water level at the bottom of the boat and can also be used as a pump switch by manual operation. The adjustable bracket is used to fix the sensor in place and slight adjustment of height. The housing, which can be conveniently disassembled and cleaned, prevents foreign particles from interfering with the float’s ...
-
Manufactured by KUS USA, INCbased in USA
OVG is used for detecting the water level at the bottom of your boat. When water comes up to alarm, the buzzer will sound. The housing, which can be conveniently disassembled and cleaned, prevents foreign particles from interfering with the float’s ...
-
Manufactured by Xylem, Inc.based in USA
When out to sea, boat owners demand products that are reliable and durable — especially during the most demanding types of weather and work. Xylem’s reputation is watertight, with more than 70 years serving the marine ...
-
Manufactured by Deckma Hamburg GmbHbased in GERMANY
The OMD-32 Oil-in-Water Monitor has been designed specifically for use in conjunction with oil-water separator units. The OMD-32 has been constructed using technology of the DECKMA HAMBURG OMD series industrial instruments and 15ppm Bilge Alarm Monitors, that have a specification and performance which exceeds the requirements of the International Maritime Organization specifications for 15ppm ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you