Corrosion Monitoring Services For Water Monitoring Available In Nunavut
-
PremiumManufactured by Avecom NVbased in BELGIUM
Microbiologically influenced corrosion (MIC), the deterioration of materials by micro-organisms or their activities, impacts nearly all industries and is responsible for an estimated 40% of internal ...
-
PremiumManufactured by Intecna srlbased in ITALY
For over 30 years, INTECNA has developed and applied products that are used in thepipeline hydraulic testphase. Our products have been approved by many Oil & Gas Companies, have been accepted in the discharge phase by Environmental Control Authorities around the World and have therefore received many references that identified INTECNA as an international ...
-
Manufactured by ELWAVEbased in FRANCE
Offshore infrastructure survey and maintenance requires the use of numerous sensors (pressure, vibration, corrosion, etc.) to monitor infrastructure operating status and ...
-
Manufactured by FORCE Technologybased in DENMARK
An essential aspect to complying with health, safety and environmental requirements, is establishing excellent routines for inspection and maintenance. Through systematic approaches, we provide full management of all inspection and maintenance related tasks throughout an assets life-cycle. These services are provided both separately and combined. The combination of our inspection and maintenance ...
-
based in USA
Quest Integrity performs specialized consulting and research into ferrous and non-ferrous metals, nonmetallic materials, coatings and surface ...
-
based in USA
In few industries is reliability more emphasized. The risk associated with the failure of key components is beyond measure. Verifying raw materials, analyzing failures and thoroughly testing new products are critical to maintaining a strong safety record. As a Nadcap approved laboratory, IMR maintains a strict quality system with tight control of all aspects of testing from sample tracking and ...
-
Manufactured by Q-Lab Corporationbased in USA
For those who are interested in accelerated weathering, light stability, and corrosion testing but are not yet ready to purchase QUV, Q-SUN, or Q-FOG test equipment, we offer a full range of contract laboratory testing services in our fully-equipped laboratories in Florida and Germany. Q-Lab can also act as an unbiased third party wherever third-party verification of test results is required. Our ...
-
Manufactured by Aptest NDT Servicesbased in INDIA
Eddy current testing is a well-established method of nondestructive testing that is used to examine nonferrous/nonmagnetic materials such as condenser and heat exchanger tubes in power generation plants. Eddy current testing reveals discontinuities in tubing, provides plant engineers with an accurate assessment of a unit’s condition, and is a tool for predicting the remaining useful life of ...
-
based in USA
The multidisciplinary experts at GTI Energy Testing Laboratories stand ready to serve as a world-class resource, leveraging the latest advances in analytical instrumentation. We provide a comprehensive menu of standardized and custom testing services—gas quality analysis, solid fuels analysis, plastic testing, and failure analysis—and provide customized support not available in ...
-
based in INDIA
DTH inspection Services, from its offices in Delhi, provides inspection and quality assurance services to help retailers, trading partners, importers and manufacturers assess product quality and meet the regulatory requirements of their ...
-
Manufactured by Q-Lab Corporationbased in USA
Q-TRAC natural sunlight concentrator testing is available at Q-Lab's Arizona facility. It gives super fast results like accelerated laboratory testers, but instead uses actual sunlight as the light source. It is exceptionally useful for highly durable materials with exceptionally long lifetime expectations. The Q-TRAC system uses an array of 10 mirrors to reflect and concentrate full spectrum ...
-
by RCP Inc.based in USA
RCP can identify issues important to the acquisition decision making process (i.e. 'deal-killers', significant compliance gaps, significant future regulatory liabilities/costs, etc.). RCP will evaluate the pipeline's operating and maintenance history, its environment, and other factors to identify any unusual risks or liabilities. This can include, for example, problems identified during previous ...
-
Manufactured by ProMark Associates, Inc.based in USA
The photos on this page were taken in a control room for a pulp mill and similar computer rooms that are exposed to corrosive gases produced as by-products of manufacturing. This kind of corrosion can take place where nobody can see it until it’s too late. Hidden corrosion can take place and over time cause a critical component or circuitboard to fail enough to cause serious damage in the ...
-
Manufactured by Aptest NDT Servicesbased in INDIA
UT - Ultrasonic Testing: Ultrasonic nondestructive testing, also known as ultrasonic NDT or simply UT, is a method of characterizing the thickness or internal structure of a test piece through the use of high frequency sound waves. The frequencies, or pitch, used for ultrasonic testing are many times higher than the limit of human hearing, most commonly in the range from 500 KHz to 20 ...
-
Manufactured by J B Nag Water Technologies Pte. Limitedbased in INDIA
Field Service. Plant Start-up Assistance. Replacement of Parts in Water/Wastewater Equipments. Trouble Shooting & Training. Membrane Cleaning Process. Preventive Maintenance in Water/Wastewater treatment Plants. Bio Culture Products. Polymer dosing & Optimization. Boiler & Cooling Water Chemical Implementation. Corrosion test rack study in cooling towers. Dip slide study for Microbial ...
-
by TÜV SÜD AGbased in GERMANY
Operators of buildings accessed by the public carry a lot of responsibility. Collapse scenarios demonstrate time and again that safety measures are essential. For years, TÜV SÜD construction experts have inspected the design and construction of public halls, focusing in particular on their load-bearing capacity. Empirical values collected so far have shown that problems with ...
-
by Fugrobased in NETHERLANDS
Some of the most demanding applications of NDT (nondestructive testing) are found in nuclear energy, power generation, petrochemicals, mining, construction and the oil and gas industries. To meet the stringent requirements of these applications, Fugro has developed a range of professional services that use a complete suite of equipment, operated by highly qualified technical ...
-
by Adiquimicabased in SPAIN
Origin and quality of input water in a cooling circuit, as well as restrictions in certain physico-chemical parameters resulting from the use of some materials in the circuit, condition the physico-chemical and microbiological treatment to ...
-
based in TURKEY
We provide independent advice on complex technical problems at senior levels in the public and private sectors. We take a hands-on role to ensure solutions are not only conceived, but also delivered with genuine benefits. Within our consultancy, we support our clients by cutting through complexity to deliver results. We plan, design and deliver solutions that result in real value through ...
-
based in USA
Extend the service life of valuable infrastructure assets and reduce the risk of costly and dangerous failures. Battelle is pioneering new materials, technologies and methods to help you assess and improve the integrity of critical pipeline and infrastructure ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you