Insertion Flow Meters Equipment For Water Monitoring Available In Poland
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The VPFlowScope® DP is the ultimate measurement tool for saturated compressed air flow measurements. The unique design enables you to take measurements in the discharge pipe of a compressor under 100% saturated conditions. You can combine the probe with two display module types or with a connector cap without ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The VPFlowScope M is a 4-in-1 insertion flow meter for compressed air and technical gases. It can be installed under pressure and measures bi-directional flow, pressure, temperature, totalized flow simultaneously. The VPFlowScope M is the next step in gas measurement. You are industry 4.0 ready, with the additional Ethernet output. With the VPFlowScope M re-calibration is history: simply exchange ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The VPFlowScope Probe is the number one measurement tool for compressed air audits and fixed installations. You can combine the probe with two display module types or a connector cap without display. With the VPFlowScope Probe you can measure virtually any compressed air system using a single ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The hot tap drill is the universal tool to install your insertion flow meter in any compressed air system. In only 30 minutes you can drill a hole and install your flow meter. Using a hot tap saddle and a hot tap drill, you can create a new installation point without depressurizing your ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
With the VPFlowScope® M you are ready for the future. This next-generation flow meter is Industry 4.0/IOT ready. Next to 4 .. 20 mA and RS485 (Modbus RTU), it also has a built-in Ethernet (Modbus/TCP) interface, making it easy to connect directly to any network. It can be installed under pressure and measures (bi-directional) thermal mass flow, pressure, temperature and total flow ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The Model ST50 is a compact, low cost solution for accurate, repeatable flow rate measurement of air, compressed air or nitrogen. This insertion-style flow meter has no moving parts and is available in probe lengths for installation into pipe diameters from 2.5 inches to 24 inches [63 mm to 610 mm]. It is easily connected into the pipe via a 1/2 inch or 3/4 inch NPT compression ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
Hydraulic test bench tor insertion probes and transit flowmeters. Creation and edition of calibration certificates Ideal training equipment for your teams. Product maintenance Flowmeter calibration ...
-
Manufactured by Atlas Copco USA - Compressorsbased in USA
The HSI CP 3100 PLC controller enhances operation of Multistage Centrifugal type blowers by controlling blower output through a variable frequency drive without the need for a flow meter.Using HSFs proprietary multi-algorithm program, this controller can calculate flow more accurately than traditional insertion type flow meters while achieving better reliability with more stable input devices. ...
-
Manufactured by Sierra Instruments, Inc.based in USA
FlowTrak is an economical solution to problems associated with monitoring flow installations where long, straight runs of piping are not available. Extensive scientific testing since the 1990s has demonstrated that this device virtually eliminates the effect of piping conditions with fewer upstream diameters than any other flow conditioning technique. And its simplicity means it is a fraction of ...
-
Manufactured by Weber Sensors GmbHbased in GERMANY
The i-captor includes standard features such as highly accurate temperature sensing and is available with both 4-20mA outputs for temperature and flow as well as RS485 Modbus RTU for digital signalling. The i-captor is simple, easy to install, very affordable and inherits Weber’s legendary reliability. It does not suffer from accuracy losses due to changes in fluid temperature, has a better ...
-
Manufactured by Kurz Instruments, Inc.based in USA
The Series 454FTB-WGF represents the first thermal mass flow meter intended for use in Wet Gas and condensing environments. This product is specifically designed for Biogas measurements in digester and landfill applications. By utilizing advanced signal processing and sensor technology, the process flow signal is independent from the effects of moisture in the process gas ...
-
Manufactured by Kurz Instruments, Inc.based in USA
K-BAR 2000B multipoint insertion flow meter uses up to four sensors for measurement redundancy and to ensure accuracy. Its rugged design withstands the high stress and high vibrations found in large industrial stacks and ducts that commonly have wide-ranging velocity and temperature profiles. The K-BAR 2000B supports process temperatures up to 260°C or up to ...
-
Manufactured by McCrometer, Inc. - Veraltobased in USA
Ideal for Clean or Dirty Water Flow Measurement. Electromagnetic Insertion Meter for Municipal and Industrial Flow Applications. The SPI Mag Insertion Flow Meter provides a highly cost-effective solution for the accurate measurement of liquid flow in closed conduit, pressurized pipe applications. Unlike conventional magnetic meters, the SPI Mag's cost is independent of pipe ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
Sensor diameter: 15 mm (0.6") Pipe diameter range: 3" to 12". Ease of installation with no interruption to supply. Accurate measurement on low velocities: +/- 2 mm/s at 2 cm/s (0.006 ft/sec at 0.066 ft/sec). "Hot tap" installation (3/4"BSPorl\IPT). Self checking of operation in accordance with OIML R49 Type P (Permanent) requirements. ...
-
Manufactured by SIKA Dr. Siebert & Kuhn GmbH & Co. KGbased in GERMANY
SIKA flow switches are used for monitoring volume flows. Depending on the requirements, they are available for different nominal widths and switching point ranges. Thanks to the "modular principle", the product variants and options can be adapted to a wide range of applications. The wide temperature and pressure ranges as well as the choice of materials or the various connection options offer a ...
-
Manufactured by SIKA Dr. Siebert & Kuhn GmbH & Co. KGbased in GERMANY
The SIKA flow switches are used for monitoring volume flows. Depending on the requirements, they are available for different nominal widths and switching point ranges. Thanks to the "modular principle", the product variants and options can be adapted to a wide range of applications. The wide temperature and pressure ranges as well as the choice of materials or the various connection options offer ...
-
Manufactured by McCrometer, Inc. - Veraltobased in USA
The SPI Mag (Single Point Insertion) Electromagnetic Flow Meter is a hot tappable single point insertion flow meter for measuring forward flow. The sensor is available for one- inch or two-inch taps, depending upon line size and ...
-
Manufactured by Jiangsu BCST Group Co., Ltdbased in CHINA
BCST insertion water flowmeter is a new type of flow meter developed on the basis of pipeline electromagnetic flowmeter. It can be used to solve the problems of installation difficulties and large costs of pipeline type electromagnetic ...
-
Manufactured by Spire Metering Technology, LLC.based in USA
SpireMag Series MAG888 high-performance magnetic flowmeter accurately measures the flow volume of any conductive liquids, such as water, salt water, sewage, pulps, slurry, acid, alkali, or, any mixtures of liquids and solids which have a specific minimum of electric conductivity. SpireMag Series MAG888 has been widely used in municipal, wastewater treatment, irrigation,chemicals, as well as ...
-
Manufactured by iCenta Controls Ltdbased in UNITED KINGDOM
The Metri IC-IPM Insertion Paddlewheel Meter (IPM) Series is the ideal liquid flow meter for insertion into pipe sizes ranging from 40mm to 300mm. Simple to install and operate, this cost effective robust radial turbine meter provides accurate velocity measurement of a variety of liquid types such as water, oils, hydrocarbons and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you