Insertion Flow Meters Equipment For Water Monitoring Available In Missouri
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
With the VPFlowScope® M you are ready for the future. This next-generation flow meter is Industry 4.0/IOT ready. Next to 4 .. 20 mA and RS485 (Modbus RTU), it also has a built-in Ethernet (Modbus/TCP) interface, making it easy to connect directly to any network. It can be installed under pressure and measures (bi-directional) thermal mass flow, pressure, temperature and total flow ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The hot tap drill is the universal tool to install your insertion flow meter in any compressed air system. In only 30 minutes you can drill a hole and install your flow meter. Using a hot tap saddle and a hot tap drill, you can create a new installation point without depressurizing your ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The VPFlowScope Probe is the number one measurement tool for compressed air audits and fixed installations. You can combine the probe with two display module types or a connector cap without display. With the VPFlowScope Probe you can measure virtually any compressed air system using a single ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The Model ST50 is a compact, low cost solution for accurate, repeatable flow rate measurement of air, compressed air or nitrogen. This insertion-style flow meter has no moving parts and is available in probe lengths for installation into pipe diameters from 2.5 inches to 24 inches [63 mm to 610 mm]. It is easily connected into the pipe via a 1/2 inch or 3/4 inch NPT compression ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The VPFlowScope® DP is the ultimate measurement tool for saturated compressed air flow measurements. The unique design enables you to take measurements in the discharge pipe of a compressor under 100% saturated conditions. You can combine the probe with two display module types or with a connector cap without ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The VPFlowScope M is a 4-in-1 insertion flow meter for compressed air and technical gases. It can be installed under pressure and measures bi-directional flow, pressure, temperature, totalized flow simultaneously. The VPFlowScope M is the next step in gas measurement. You are industry 4.0 ready, with the additional Ethernet output. With the VPFlowScope M re-calibration is history: simply exchange ...
-
Manufactured by Adept Fluidyne Pvt. Ltdbased in INDIA
Adept UFM 6730 wall-mount Insertion Type Ultrasonic Flow meter provides abundant capabilities for accurate liquid flow ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
Sensor diameter: 15 mm (0.6") Pipe diameter range: 3" to 12". Ease of installation with no interruption to supply. Accurate measurement on low velocities: +/- 2 mm/s at 2 cm/s (0.006 ft/sec at 0.066 ft/sec). "Hot tap" installation (3/4"BSPorl\IPT). Self checking of operation in accordance with OIML R49 Type P (Permanent) requirements. ...
-
Manufactured by Electronet Equipments Private Limitedbased in INDIA
Electronet series ELMAG - 100 are micro-controller based insertion type electromagnetic flow meters specially used for various industrial applications. These flow meters accurately measure the flow rate of conductive liquids & slurries in closed pipes. Due to its simple & rigid design, the flow meter is an obstruction-less & maintenance-free instrument in place of conventional ...
-
Manufactured by Jiangsu BCST Group Co., Ltdbased in CHINA
BCST insertion water flowmeter is a new type of flow meter developed on the basis of pipeline electromagnetic flowmeter. It can be used to solve the problems of installation difficulties and large costs of pipeline type electromagnetic ...
-
Manufactured by VorTek Instrumentsbased in USA
VorTek Instruments’ Model Pro-T® multivariable flowmeters utilize three primary sensing elements– –a turbine sensor, an RTD temperature sensor, and a solid-state pressure transducer–– to measure the mass flow rate of gases, liquids and steam. Because the TurboPro® is able to measure all process variables within a single device it provides exceptional ...
-
Manufactured by Spire Metering Technology, LLC.based in USA
SpireMag Series MAG888 high-performance magnetic flowmeter accurately measures the flow volume of any conductive liquids, such as water, salt water, sewage, pulps, slurry, acid, alkali, or, any mixtures of liquids and solids which have a specific minimum of electric conductivity. SpireMag Series MAG888 has been widely used in municipal, wastewater treatment, irrigation,chemicals, as well as ...
-
based in USA
ONICON’s F-3500 Series Insertion Electromagnetic Flow Meters are suitable for measuring electrically conductive liquids in a wide variety of applications. Each F-3500 provides a single analog output for flow rate, a high-resolution frequency output to drive peripheral devices, scalable pulse output for totalization, and an empty pipe alarm. It is available for use in pipes ranging in size ...
-
based in USA
Combines reliable full-pipe flow measurement with high accuracy, and ease of installation, even in pressurized ...
-
Manufactured by Atlas Copco USA - Compressorsbased in USA
The HSI CP 3100 PLC controller enhances operation of Multistage Centrifugal type blowers by controlling blower output through a variable frequency drive without the need for a flow meter.Using HSFs proprietary multi-algorithm program, this controller can calculate flow more accurately than traditional insertion type flow meters while achieving better reliability with more stable input devices. ...
-
Manufactured by McCrometer, Inc. - Veraltobased in USA
The SPI Mag (Single Point Insertion) Electromagnetic Flow Meter is a hot tappable single point insertion flow meter for measuring forward flow. The sensor is available for one- inch or two-inch taps, depending upon line size and ...
-
Manufactured by Weber Sensors GmbHbased in GERMANY
The i-captor includes standard features such as highly accurate temperature sensing and is available with both 4-20mA outputs for temperature and flow as well as RS485 Modbus RTU for digital signalling. The i-captor is simple, easy to install, very affordable and inherits Weber’s legendary reliability. It does not suffer from accuracy losses due to changes in fluid temperature, has a better ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
Hydraulic test bench tor insertion probes and transit flowmeters. Creation and edition of calibration certificates Ideal training equipment for your teams. Product maintenance Flowmeter calibration ...
-
Manufactured by Kurz Instruments, Inc.based in USA
The Series 454FTB-WGF represents the first thermal mass flow meter intended for use in Wet Gas and condensing environments. This product is specifically designed for Biogas measurements in digester and landfill applications. By utilizing advanced signal processing and sensor technology, the process flow signal is independent from the effects of moisture in the process gas ...
-
Manufactured by Kurz Instruments, Inc.based in USA
K-BAR 2000B multipoint insertion flow meter uses up to four sensors for measurement redundancy and to ensure accuracy. Its rugged design withstands the high stress and high vibrations found in large industrial stacks and ducts that commonly have wide-ranging velocity and temperature profiles. The K-BAR 2000B supports process temperatures up to 260°C or up to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you