Insertion Flow Meters Equipment For Water Monitoring Available In Vietnam
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The Model ST50 is a compact, low cost solution for accurate, repeatable flow rate measurement of air, compressed air or nitrogen. This insertion-style flow meter has no moving parts and is available in probe lengths for installation into pipe diameters from 2.5 inches to 24 inches [63 mm to 610 mm]. It is easily connected into the pipe via a 1/2 inch or 3/4 inch NPT compression ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
With the VPFlowScope® M you are ready for the future. This next-generation flow meter is Industry 4.0/IOT ready. Next to 4 .. 20 mA and RS485 (Modbus RTU), it also has a built-in Ethernet (Modbus/TCP) interface, making it easy to connect directly to any network. It can be installed under pressure and measures (bi-directional) thermal mass flow, pressure, temperature and total flow ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The VPFlowScope® DP is the ultimate measurement tool for saturated compressed air flow measurements. The unique design enables you to take measurements in the discharge pipe of a compressor under 100% saturated conditions. You can combine the probe with two display module types or with a connector cap without ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The VPFlowScope Probe is the number one measurement tool for compressed air audits and fixed installations. You can combine the probe with two display module types or a connector cap without display. With the VPFlowScope Probe you can measure virtually any compressed air system using a single ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The VPFlowScope M is a 4-in-1 insertion flow meter for compressed air and technical gases. It can be installed under pressure and measures bi-directional flow, pressure, temperature, totalized flow simultaneously. The VPFlowScope M is the next step in gas measurement. You are industry 4.0 ready, with the additional Ethernet output. With the VPFlowScope M re-calibration is history: simply exchange ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The hot tap drill is the universal tool to install your insertion flow meter in any compressed air system. In only 30 minutes you can drill a hole and install your flow meter. Using a hot tap saddle and a hot tap drill, you can create a new installation point without depressurizing your ...
-
Manufactured by MSR Magmeterbased in CANADA
The Magnum flowmeter is used in applications ranging from water to fish-plant effluent. The only criteria for its use are that the liquid measured be conductive and that the pipes ranging from size 3" up to 50 " are completey filled. An extra long version is available for pipes up to 120". Each Magnum is application independent. This means that the Magnum can be moved between different pipe sizes ...
-
Manufactured by Sierra Instruments, Inc.based in USA
Sierra was the first to introduce multivariable mass vortex flow meters to the market in the late 1990s with the InnovaMass "S-Series" product line--the 240S and 241S. The InnovaMass 240S inline version is a true workhorse in applications ranging from large pipes and ducts, to high pressure and saturated or superheated steam. The InnovaMass 241S is manufactured as a volumetric only version or a ...
-
Manufactured by MSR Magmeterbased in CANADA
This is our latest magnetic flowmeter based on the sucessfull Magnum design. Magnum EX is used in hazardous environments and locations (CSA Class I, Div. 1, Ex ia). In all other respects it has the same features as the standard and IC version ...
-
Manufactured by Q&T Instrument Co., Ltdbased in CHINA
Insertion vortex flow meter is used in numerous branches of industry to measure the volume flow of liquids, gases and steam. Applications in the chemicals and petrochemicals industries, for example, in power generation and heat-supply systems involve widely differing fluids: saturated steam, superheated steam, compressed air, nitrogen, liquefied gases, flue gases, carbon dioxide, fully ...
-
Manufactured by Leomi Instruments Pvt. Ltdbased in INDIA
LEOMI-586 PFA is special version of sensor with Perfluoroalkoxy alkanes (PFA) is a copolymer of hexafluoropropylene and perfluoroethers. PFA has good anti adhesion effect, hydrophobic, excellent corrosion protection, superior creep resistance, high chemical inertness properties. It is used for extreme resistance to corrosive gases at high temperatures. It can be used for various process ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
The HydrINS® 2 flowmeter, developed by Hydreka, is an easily deployed and cost effective flowmeter providing highly accurate bi-directional flow measurement, for water distribution and raw water pipelines. The highly versatile unit is widely used throughout the world and available in various lengths, equally well deployed for permanent or portable ...
-
Manufactured by ISOIL Industria Spabased in ITALY
The MS 3770 ‘insertion’ sensor is suitable for the mounting in non-pressurised pipe lines with diameter ranger from ND 80 to 8000 mm. It is ideal for the pipe lines monitoring and in the HVAC ...
-
Manufactured by Eldridge Products, Inc. (EPI)based in USA
This series meter is great for where agency approvals are required for Explosion Proof area locations. Inline style thermal mass flow meters include a flow section that is usually specified to match the user’s flow conduit and is then plumbed directly into the process line. This design has the sensing elements mounted directly in the flow section for exposure to the process gas. Our inline ...
-
Manufactured by Dalian Zero Instrument Technology Co., Ltdbased in CHINA
The measuring principle of electromagnetic flow meter is based on the electromagnetic induction law of Farady. The sensor is mainly composed of measuring tube with isolate lining, a pair of electrodes installed by penetration of the measuring tube wall, a pair of coils and iron core to produce working magnetic field. When the conductive fluid flows through the measuring tube of the sensor, the ...
-
Manufactured by Comate Intelligent Sensor Co., Ltdbased in CHINA
TGF460 compressed air flow meters is COMATE’s latest technology specially designed for compressed air and N2 applications. It has more compact design, which means smaller enclosure and thinner insertion tube probe. It can be installed / removed without stopping the fluid, as the pipe is thinner, field engineers will be able to insert the meter to pipe very easily. Also, TGF460 will be the most ...
-
Manufactured by Dalian Taosonics Instrument Co.,Ltdbased in CHINA
This flowmeter can be virtually applied to a wide range of measurement. A variety of liquid applications can be accommodated: ultra-pure liquids, potable water, chemicals, raw sewage, reclaimed water, cooling water, river water, plant effluent, ...
-
Manufactured by Trimble`s Water Divisionbased in USA
The Telog IFM-32 flowmeter is an easily deployed and cost effective flowmeter providing highly accurate, bi-directional flow measurement for water distribution and raw water ...
-
Manufactured by Dalian Taosonics Instrument Co.,Ltdbased in CHINA
This flowmeter can be virtually applied to a wide range of measurement. A variety of liquid applications can be accommodated: ultra-pure liquids, potable water, chemicals, raw sewage, reclaimed water, cooling water, river water, plant effluent, etc. This ultrasonic module is inline measurement for long-term.The convenor and transducer arc installed fixing on the pipe, with the advantages of ...
-
Manufactured by Nixon Flowmeters Limitedbased in UNITED KINGDOM
The FLOMAT is for use in large diameter pipes or open channels, as an economical solution for liquid metering. Flow rate for liquids with electrical conductivity better than 20 µS/cm, for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you