Insertion Flow Meters Equipment For Water Monitoring In Canada
-
Manufactured by MSR Magmeterbased in CANADA
The Magnum flowmeter is used in applications ranging from water to fish-plant effluent. The only criteria for its use are that the liquid measured be conductive and that the pipes ranging from size 3" up to 50 " are completey filled. An extra long version is available for pipes up to 120". Each Magnum is application independent. This means that the Magnum can be moved between different pipe sizes ...
-
Manufactured by Sierra Instruments, Inc.based in USA
Sierra was the first to introduce multivariable mass vortex flow meters to the market in the late 1990s with the InnovaMass "S-Series" product line--the 240S and 241S. The InnovaMass 240S inline version is a true workhorse in applications ranging from large pipes and ducts, to high pressure and saturated or superheated steam. The InnovaMass 241S is manufactured as a volumetric only version or a ...
-
Manufactured by MSR Magmeterbased in CANADA
This is our latest magnetic flowmeter based on the sucessfull Magnum design. Magnum EX is used in hazardous environments and locations (CSA Class I, Div. 1, Ex ia). In all other respects it has the same features as the standard and IC version ...
-
Manufactured by Eldridge Products, Inc. (EPI)based in USA
The EPI Model 8200MPHT series meters are great for high temperature applications where a remote enclosure is required. All EPI flow meters are equipped with a robust feature set with a wide selection of standard and normalized units of measure and come with field validation at no extra ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
The HydrINS® 2 flowmeter, developed by Hydreka, is an easily deployed and cost effective flowmeter providing highly accurate bi-directional flow measurement, for water distribution and raw water pipelines. The highly versatile unit is widely used throughout the world and available in various lengths, equally well deployed for permanent or portable ...
-
Manufactured by ISOIL Industria Spabased in ITALY
The MS 3770 ‘insertion’ sensor is suitable for the mounting in non-pressurised pipe lines with diameter ranger from ND 80 to 8000 mm. It is ideal for the pipe lines monitoring and in the HVAC ...
-
Manufactured by Eldridge Products, Inc. (EPI)based in USA
This series meter is great for where agency approvals are required for Explosion Proof area locations. Inline style thermal mass flow meters include a flow section that is usually specified to match the user’s flow conduit and is then plumbed directly into the process line. This design has the sensing elements mounted directly in the flow section for exposure to the process gas. Our inline ...
-
Manufactured by Ovarrobased in UNITED KINGDOM
PRIMEPROBE is a bi-directional insertion full bore electromagnetic flowmeter for permanent or portable use in managing water distribution systems. It is a cost effective alternative to full-bore flow meters and is ideal for use over a wide range of flows and pipe ...
-
Manufactured by Spire Metering Technology, LLC.based in USA
SpireMag Series MAG888 high-performance magnetic flowmeter accurately measures the flow volume of any conductive liquids, such as water, salt water, sewage, pulps, slurry, acid, alkali, or, any mixtures of liquids and solids which have a specific minimum of electric conductivity. SpireMag Series MAG888 has been widely used in municipal, wastewater treatment, irrigation,chemicals, as well as ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
Sensor diameter: 15 mm (0.6") Pipe diameter range: 3" to 12". Ease of installation with no interruption to supply. Accurate measurement on low velocities: +/- 2 mm/s at 2 cm/s (0.006 ft/sec at 0.066 ft/sec). "Hot tap" installation (3/4"BSPorl\IPT). Self checking of operation in accordance with OIML R49 Type P (Permanent) requirements. ...
-
Manufactured by McCrometer, Inc. - Veraltobased in USA
The SPI Mag (Single Point Insertion) Electromagnetic Flow Meter is a hot tappable single point insertion flow meter for measuring forward flow. The sensor is available for one- inch or two-inch taps, depending upon line size and ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
Hydraulic test bench tor insertion probes and transit flowmeters. Creation and edition of calibration certificates Ideal training equipment for your teams. Product maintenance Flowmeter calibration ...
-
Manufactured by Sierra Instruments, Inc.based in USA
FlowTrak is an economical solution to problems associated with monitoring flow installations where long, straight runs of piping are not available. Extensive scientific testing since the 1990s has demonstrated that this device virtually eliminates the effect of piping conditions with fewer upstream diameters than any other flow conditioning technique. And its simplicity means it is a fraction of ...
-
Manufactured by McCrometer, Inc. - Veraltobased in USA
Ideal for Clean or Dirty Water Flow Measurement. Electromagnetic Insertion Meter for Municipal and Industrial Flow Applications. The SPI Mag Insertion Flow Meter provides a highly cost-effective solution for the accurate measurement of liquid flow in closed conduit, pressurized pipe applications. Unlike conventional magnetic meters, the SPI Mag's cost is independent of pipe ...
-
Manufactured by SIKA Dr. Siebert & Kuhn GmbH & Co. KGbased in GERMANY
SIKA flow switches are used for monitoring volume flows. Depending on the requirements, they are available for different nominal widths and switching point ranges. Thanks to the "modular principle", the product variants and options can be adapted to a wide range of applications. The wide temperature and pressure ranges as well as the choice of materials or the various connection options offer a ...
-
Manufactured by SIKA Dr. Siebert & Kuhn GmbH & Co. KGbased in GERMANY
The SIKA flow switches are used for monitoring volume flows. Depending on the requirements, they are available for different nominal widths and switching point ranges. Thanks to the "modular principle", the product variants and options can be adapted to a wide range of applications. The wide temperature and pressure ranges as well as the choice of materials or the various connection options offer ...
-
Manufactured by YSI Incorporated - a Xylem brandbased in USA
The EX81 is an insertion electromagnetic flowmeter for use with conductive liquids in pipe sizes 1 to 3 inches. The EX82, Insertion Magmeter, is for use with pipe sizes 4 to 10 inches. The EX83, Insertion Magmeter, is a stainless steel electromagnetic flowmeter designed for use with pipes 12 inches in diameter. With no moving parts, the insertion electromagnetic flowmeter is highly suitable for ...
-
Manufactured by Hydreka SA - A Halma Companybased in FRANCE
Hydraulic test bench for insertion probes and transit flowmeters. Creation and edition of calibration certificates Ideal training equipment for your teams. Product maintenance Flowmeter calibration ...
-
Manufactured by ABB Measurement Productsbased in SWITZERLAND
Aquaprobe is an economic alternative to full bore flow meters. It comprises an electromagnetic sensing head mounted on the end of a support ...
-
Manufactured by Eldridge Products, Inc. (EPI)based in USA
Inline style thermal mass flow meters include a flow section that is usually specified to match the user’s flow conduit and is then plumbed directly into the process line. This design has the sensing elements mounted directly in the flow section for exposure to the process gas. Our inline style thermal mass flow meters are available in sizes from 1/4″ pipe through 4″ pipe or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you