Ocean Monitoring Equipment For Water Monitoring Available In Latin America
-
ShowcaseManufactured by Aanderaa, a Xylem Brandbased in NORWAY
The acoustic based wave instrument, SeaGuardII DCP Wave, the swiss army knife of ADCP's with the possibility to measure Ocean Waves, Ocean Currents, Tide and Water quality all from one single instrument. The acoustic based wave SeaGuardII DCP Wave, the swiss army knife of ADCP's with the possibility to measure Ocean Waves, Ocean Currents, Tide and Water quality all from one single instrument. For ...
-
PremiumManufactured by InterOcean Systems LLCbased in USA
Custom-built Towed-Array Oceanographic Winch with 12.5 HP IP65 induction motor with dual voltage (240vac or 460/480vac) drive system with automatic configuration. The drum holds 4,100 ft (1,250m) of 1.75 in. (44.5mm) of array cable and is controlled by a wireless portable joystick ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The model 2030CF Calibration Frame provides a check on the proper operation of your Model 2030 and 2031 series flowmeters. The frame imparts a torsionally precise spin to the rotor and a count difference is noted in the flowmeter window. A minimum count is necessary for the flowmeter to be within calibration. ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The OCEAN SEVEN 320Plus WOCE-CTD multiparameter probe is the result of Idronaut's 25 years experience in the design and manufacturing of high quality fast response CTDs. The OCEAN SEVEN 320Plus CTD well meets the WOCE programme accuracy, precision and resolution specifications. The CTD can be easily equipped with an additional redundant conductivity and temperature (CT) sensor pair without the ...
-
PremiumManufactured by InterOcean Systems LLCbased in USA
These instrumented sheaves are used as fairleads and cable supports for various oceanographic instruments which require electrical conductor cable wire rope or synthetic rope. The snatch block configuration permits rapid placement and removal of the cable without removing the instruments or connector at the end of the cable. Aluminum and galvanized steel construction is used for light weight, ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
Accurate Ocean Based wave measurements are critical in applications such as offshore wind farm development, navigation, cable laying, breakwater building, and bridge construction. Waves also result in continuous loads on marine structures, including docks, moorings, and offshore platforms. Waves are challenging to measure. Variables to consider when collecting wave data include the depth of the ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
The MOTUS (movement in Latin) Wave Buoy is a perfect solution for collecting environmental data in coastal areas. Collect reliable environmental data with MOTUS Wave Buoy. The MOTUS (movement in Latin) Buoy is a perfect solution for collecting environmental data in coastal areas. The platform used for collecting data is a robust buoy which has proven to be an excellent platform for providing high ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
The Aanderaa Oxygen Optode was the first and only to measure dissolved oxygen for years without drift - now it is one of the fastest! Since oxygen is involved in most of the biological and chemical processes in aquatic environments, it is a crucial parameter to measure. Oxygen can also be used as a tracer in oceanographic studies. Aanderaa revolutionized oceanographic oxygen monitoring/research ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
The SeaGuard DCP (Acoustic Doppler Current Profiler) measures currents and can be extended with wave direction, oxygen, conductivity, turbidity, temperature, and serial ...
-
PremiumManufactured by Qingdao Leice Transient Technology Co., Ltd.based in CHINA
The airborne coherent wind lidar WindMast 3000AB is a miniaturized wind lidar system with high integration and can be carried by many mobile platforms such as UAV etc. WindMast 3000AB has the function of automatic correction of platform attitude and motion velocity, which can detect 3D wind field in atmospheric boundary layer in real time. WindMast 3000AB can be used in environmental monitoring, ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
The Aanderaa Oxygen Sensor was the first and only to measure dissolved oxygen for years without drift - now it is one of the fastest! Below you can read more about the oxygen sensor working principle. Since oxygen is involved in most of the biological and chemical processes in aquatic environments, it is a crucial parameter to measure. Oxygen can also be used as a tracer in oceanographic ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
The Aanderaa Current Sensors are available in a profiling and a single-point version with three depth ratings. We offer Doppler Current Profiler Sensor, Doppler Current Sensor and the In-line ZPulse Doppler Current ...
-
PremiumManufactured by InterOcean Systems LLCbased in USA
Custom-built Oceanographic winch with 200HP IP65 induction motor with independent level wind drive capable of pulling 27,500 line tension (12,500kg) at 147 ft/min (45m/min). Closed-loop motor control with dynamic braking provides ultra-slow payload control down to a few feet per minute. The drum holds 24,600 ft (7,500 m) of 0.680 in. (17.2mm) electromechanical, double-armor cable. Level wind ...
-
PremiumManufactured by InterOcean Systems LLCbased in USA
Next-gen winch designed for autonomous Uncrewed Surface Vessels and Underwater Vehicles (USVs/UUVs). A powerful compact winch designed for remote real-time control. Mission adaptable for light hydrographic and geophysical payloads (sidescan, CTD, water sampling) and subsurface applications for defense, science and subsea operations requiring failsafe remote winch capabilities (mooring, acoustic ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
The Sailbuoy is a long endurance, wind driven Autonomous Surface Vessel (ASV). This low cost ASV solves the problem of collecting upper ocean current measurements and other oceanographic data in remote ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
FSI has been designing and manufacturing precision sensors, sonar systems, and transducers for the oceanographic community since it was founded in 1989, and has extensive experience in building complex transducer elements and arrays for government and commercial customers around the ...
-
PremiumManufactured by InterOcean Systems LLCbased in USA
Compact Winch Licensed under Agreement with Woods Hole Oceanographic Institution, Woods Hole, MA 02543. Patent No. ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
Turn your buoy into an intelligent data collecting platform with the Aanderaa MOTUS Stand-Alone Sensor. There are numerous ways of measuring Ocean Waves. At Aanderaa we have focused on three different types of measurement. One option is the MOTUS Directional Wave Sensor suitable for integration on different buoy types. It is intended for commercial as well as research use. The sensor processes ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The CSW-7 is an electric winch designed for use in oceanographic and geophysical research. This model is capable of lifting and lowering most small instrumentation payloads, while remaining light enough for four people to transport. It has a drum capacity of 1000 m of 0.25' cable. A slip ring adapter can be added to accommodate Mercotac slip rings or Klein sonar (modified Focal Technologies 180) ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
The Aanderaa Oxygen Optode was the first and only to measure dissolved oxygen for years without drift - now it is one of the fastest! Below you can read more about the oxygen sensor working ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you