Oil-in-Water Monitoring Applications available in Tajikistan
-
Premium
Advanced cable handling solutions for defense industry
InterOcean Systems has worked with military defense departments and contractors to design and fabricate customized cable handling systems, for shipboard and undersea ...
By InterOcean Systems LLC based in Santee, CALIFORNIA (USA).
-
Premium
ppm Measurement of Oil in Water for the Petrochemical Industry
Measuring the oil content in water or soil is a specialty of Wilks Enterprise. InfraCal TOG/TPH Analyzers provide on-site ppm measurements to help ensure upstream or downstream wastewater complies with discharge permits to avoid potentially costly fines. There are over 3,000 InfraCal TOG/TPH Analyzers in operation today around the world measuring the oil and grease levels in produced water on drilling platforms, oil content in FRAC water, hydrocarbons in wastewater effluents from refineries, and TPH in soil at ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
OSE II 550,000 Liter Emergency Oil Spill Clean Up- The Most Effective Response In The World For A Major Oil Spill
OSE II Cleaned up a Major oil spill of 550,000 liters (150,000 gallons) in Nigeria, in less than three and a half weeks. 99.9% reduction of the oil in the water and 97.9% reduction of oil on the shoreline with zero natural resource destruction, and ...
By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).
-
Premium
Oil in Water Analysis for Flowback or Produced Water
The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote lab results can take several days to a week. InfraCal TOG/TPH Analyzers allow for oil in water testing at the well site in less than 10 minutes. The sampling requires a few simple steps that can ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Flow - Control and Floating Skimmer Systems for Catastrophic Spill
Advancing Oil Spill Processor Accumulates, Separates, and Conditions Oil and Debris Grinder. Completely operator controlled for Spill Specific optimization of operation. The Model 19300 is a high volume, debris grinding, oil spill processor for maximum oil recover efficiency in water and debris environments common of offshore oil ...
By Skim-pak based in Dublin, CALIFORNIA (USA).
-
Premium
ADVANCEES - Formation Water Custom skid-mounted water purification equipments
Oil and grease in formation water includes free oil, dispersed oil (small oil droplets), and emulsified oil. Oil and grease discharge, along with produced water, involves compliance with stringent regulations. Oil and grease removal methods depend on the end usage of treated water and composition of oil in the produced water. For more info contact us at ...
By Advanced Equipment and Services, Inc based in Coral Springs, FLORIDA (USA).
-
Premium
Sub-ppm Oil in Water Testing
InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings, ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Machine condition monitoring for oil in water/soil
Overview Being able to trust your instruments to make quick, easy and accurate measurements in the field is key when dealing with regulatory requirements. The InfraCal2 infrared analyzer is the choice of experts for measuring oil in produced water; oil contamination in soil; and fats oil and greases in waste ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Monitoring surface water for wastewater treatment industry
Pollution Risk: Surface water encompasses storm water derived from hard standing areas, river water and reservoirs. All types of surface water are at risk from ingress of pollution and therefore need to be monitored. On-line continuous monitoring can identify and alarm pollution so corrective action can be ...
By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.
-
Water Measurement Monitors for Monitoring Hydrocarbons in Bilge Water
The Situation: Various processes onboard ships, such as machinery wash-down, maintenance, and leakage, generate oily wastewater. This contaminated water flow collects in the bilge of the ship. Marine diesel, lubricating oils, grease, as well as other contaminants may be present in bilge water. The bilge water is discharged overboard, with oil and grease concentrations in the discharged water limited by national and international ...
By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).
-
Water Measurement Monitors for Advanced Treatment of Produced Water for Crop Irrigation
The Situation: California is currently facing one of the most severe droughts in recorded history. In order to mitigate the drought conditions, various water conservation measures have already been implemented, and others are being considered. One method under consideration is using the advanced treatment of produced water to make it available for irrigation. A major challenge to the success of this method is economically treating the produced water to achieve the quality mandated by California’s irrigation ...
By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).
-
Chemical Detection Solutions for Oil and Gas Applications
A variety of amines can be found in oil and gas, both as constituents and as by-products of processes to remove H2S and/or CO2. Lonestar can detect the presence of amines in both crude oil and water backgrounds, allowing real-time monitoring of concentrations throughout the treatment ...
By Owlstone Inc. based in Westport, CONNECTICUT (USA).
-
Sitelab Hydrocarbon Fingerprinting & Forensic Analysis using UVF-Trilogy
Sitelab's UVF-Trilogy analyzer, model no. 7200-004-FNGP, is used to fingerprint and identify the age or type of contamination on your site at a fraction of the cost compared to conventional laboratory forensic analysis. The equipment is easy to use and samples take just a few minutes to analyze. Test samples for GRO, EDRO, PAHs and TPH-Oil using the four UV modules included with the instrument. ...
By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).
-
Clean drinking water monitoring solutions for wastewater treatment industry
Continuous on-line monitoring can be used to alarm unacceptable deviations from established control points and to ensure quality standards are ...
By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.
-
Water quality monitoring systems for offshore applications
Rivertrace has the solution to your environmental monitoring needs and can tailor make systems to your own individual requirements. Our range of monitoring applications includes, boiler water, condensate cooling water, produced water and discharge water. Our commitment to ongoing development ensures that these products remain at the forefront of available technology, and consistently push the boundaries of oil-in-water analysis. ...
By Rivertrace Ltd based in Redhill, UNITED KINGDOM.
-
Water Measurement Monitors for Monitoring Heat Exchanger Leaks in Paper Plants
The Solution: Numerous technologies and products were evaluated for this application. A monitor with no moving parts, no significant effect from turbidity, and the ability to detect the lube oil at less than 1 ppm was determined to be the best solution. Fast, reliable, and accurate detection of lubricating oil in the water was ...
By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).
-
Water Measurement Monitors for Monitoring Once Through Cooling Water
The Situation:Power plants and paper mills use service water loops and mill water loops respectively for the cooling of lubricating, hydraulic, turbine and transformer oil. These cooling systems feature large, recirculating volumes of water which are treated with biocides, dispersants, and corrosion inhibitors. By comparison, refineries often use once through cooling water systems. The cooling water is taken from lakes, rivers, or the ocean and circulated once through the plant to cool processes. Large volumes of ...
By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).
-
Water Measurement Monitors for Monitoring Desalination Intake
The Situation: Plankton biomass in sea water can be variable by season, weather and other uncontrollable conditions. Industrial plants with sea water intake can be affected by high plankton concentrations. Reverse osmosis desalination systems can have high differential pressure, and when treated with chlorine, can have high disinfection byproducts in the membrane permeate. Chlorophyll A is the primary pigment in algae. Its measurement in sea water is an effective method of tracking total plankton concentration. In ...
By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).
-
UV fluorescence technology for monitoring oil in power plant cooling water
The TD-4100 utilizes a non-fouling, non-contact flow cell which requires little to no maintenance, and uses fluorescence technology to accurately detect oil in water from low ppb to high ppm. For this application, the TD-4100 monitors oil in water at 1 to 5 ppm and signals an operator with an alarm when the concentration exceeds the high alarm relay ...
By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).
-
Water Quality Monitoring Solutions for Environmental
Environmental water quality monitoring is a growing challenge. Every day a staggering two million tons of human waste and large amount of chemicals are disposed into water systems. Water quality monitoring is incredibly useful for safeguarding the environmental against adverse effects. However, it is not always easy to gather water quality data. While parameters such as pH, temperature, conductivity, dissolved oxygen, and turbidity are essential to characterize the chemical, biological and physical qualities of ...
By Yosemitech Technologies Co., Ltd. based in Suzhou Industrial Park, CHINA.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you