Oil-in-Water Monitoring Applications available in Rhode Island
-
Premium
Sub-ppm Oil in Water Testing
InfraCal 2 is the newest addition to the worldwide-recognized Wilks InfraCal line of portable, filter-based infrared analyzers. It provides sub-ppm measurement capability, password protected calibrations and instrument settings, data storage and multiple calibrations, and a touch screen display for more user options. Ideal for measuring oil content levels in FRAC and produced water, fats, oil and grease (FOG) in wastewater, industrial and refinery wastewater effluents, cleaning of metal parats, drill cuttings, ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
OSE II 550,000 Liter Emergency Oil Spill Clean Up- The Most Effective Response In The World For A Major Oil Spill
OSE II Cleaned up a Major oil spill of 550,000 liters (150,000 gallons) in Nigeria, in less than three and a half weeks. 99.9% reduction of the oil in the water and 97.9% reduction of oil on the shoreline with zero natural resource destruction, and ...
By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).
-
Premium
Flow - Control and Floating Skimmer Systems for Catastrophic Spill
Advancing Oil Spill Processor Accumulates, Separates, and Conditions Oil and Debris Grinder. Completely operator controlled for Spill Specific optimization of operation. The Model 19300 is a high volume, debris grinding, oil spill processor for maximum oil recover efficiency in water and debris environments common of offshore oil ...
By Skim-pak based in Dublin, CALIFORNIA (USA).
-
Premium
ADVANCEES - Formation Water Custom skid-mounted water purification equipments
Oil and grease in formation water includes free oil, dispersed oil (small oil droplets), and emulsified oil. Oil and grease discharge, along with produced water, involves compliance with stringent regulations. Oil and grease removal methods depend on the end usage of treated water and composition of oil in the produced water. For more info contact us at ...
By Advanced Equipment and Services, Inc based in Coral Springs, FLORIDA (USA).
-
Premium
Oil in Water Analysis for Flowback or Produced Water
The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote lab results can take several days to a week. InfraCal TOG/TPH Analyzers allow for oil in water testing at the well site in less than 10 minutes. The sampling requires a few simple steps that can ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Machine condition monitoring for oil in water/soil
Overview Being able to trust your instruments to make quick, easy and accurate measurements in the field is key when dealing with regulatory requirements. The InfraCal2 infrared analyzer is the choice of experts for measuring oil in produced water; oil contamination in soil; and fats oil and greases in waste ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Advanced cable handling solutions for defense industry
InterOcean Systems has worked with military defense departments and contractors to design and fabricate customized cable handling systems, for shipboard and undersea ...
By InterOcean Systems LLC based in Santee, CALIFORNIA (USA).
-
Premium
ppm Measurement of Oil in Water for the Petrochemical Industry
Measuring the oil content in water or soil is a specialty of Wilks Enterprise. InfraCal TOG/TPH Analyzers provide on-site ppm measurements to help ensure upstream or downstream wastewater complies with discharge permits to avoid potentially costly fines. There are over 3,000 InfraCal TOG/TPH Analyzers in operation today around the world measuring the oil and grease levels in produced water on drilling platforms, oil content in FRAC water, hydrocarbons in wastewater effluents from refineries, and TPH in soil at ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Instrumentation technologies for marine
When ships discharge their bilge water the maximum level of hydrocarbons in the water is regulated by various Environmental Protection Agencies, for example there is a limit of 15ppm enforced by the IMO (International Maritime Organisation) in all international waters. Companies breaching these limits are liable to significant fines. Further regulations have been introduced to control the use of bunker fuels. The Marine Environment Protection Committee (MEPC) of the IMO has approved proposed amendments to ...
By Advanced Sensors Ltd. - part of PAC L.P. based in Carrickfergus, UNITED KINGDOM.
-
Portable and fixed gas analysers for remediation and groundwater
Contamination can arise from circumstances such as fuel spills and plant leaks. Geotech has developed a range of equipment to help you comply with each stage of the remediation ...
By QED Environmental Systems based in Dexter, MICHIGAN (USA).
-
Validation of Salt Water Disposal Well Treatment Plants with Handheld Oil in Water Sample Analyzer
Ideally, a continuous online monitor would be used for collecting data to determine upset frequencies, duration and normal conditions. Many of the SWD facilities and demonstration plants do not have a budget that allows for continuous monitoring. However, high frequency sample analysis can be performed on site, using a portable analyzer. Easy to use, low cost field analyzers, such as the TD-500D, are essential for optimizing the effectiveness of treatment systems during pilot studies and meeting a budget that ...
By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).
-
UVF-Trilogy Analyzer for TPH Oil & Grease Range Hydrocarbons
Sitelab's UVF-Trilogy analyzer, model no. 7200-004-TPH, includes TPHOIL UV module used to detect total petroleum hydrocarbons in the C15 to C50 "Oil and Grease" range. The analyzer is factory calibrated using Sitelab's TPH-Oil calibration kits for testing low and high concentrations of hydrocarbons in soil or water. This test matches well to U.S. EPA 1664, 9071B and similar gravimetric methods for oil in water, oil in soil applications. ...
By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).
-
Water Measurement Monitors for Monitoring Fuels in Stormwater
The Situation: A major pipeline company has large storage tank farms throughout the Western States. The pipeline company transports, stores, blends additives, and distributes gasoline, diesel, and jet fuel to retail service stations and airports. Due to the quantity and movement of fuel at these facilities, there is always the potential for fuel spills. These facilities prevent out of compliance discharge by capturing all stormwater in storm drains, which is then sent to treatment systems prior to discharge. At ...
By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).
-
Detecting oil, hydrocarbons and pollution in river water
In this study, we are going to look at how the MS1200 Oil in Water/VOC/Hydrocarbon analyser has been used by municipal water companies in the UK. Specifically, we will show how the instrument has been used to monitor spillages and contamination events affecting source water, and how this detection has been beneficial to the water companies concerned. We will also look at some graphs that show what kind of response can be expected during different kinds of events, and we will also briefly discuss what subsequent ...
By Multisensor Systems Ltd. based in Cheadle, UNITED KINGDOM.
-
Water Measurement Monitors for Monitoring Oil in Cooling Water Sector
The Situation: A municipal power plant in the southern United States operates more than 10 stationary power plant engines capable of producing 52 megawatts of electric power. The plant is part of a larger statewide power grid system. Within the grid, the municipality brokers the purchase or sale of power hourly, based on the needs of municipality and the market rate for power on the grid system. The power plant engines are fired-up on short notice to meet the needs of the dispatcher. The engines produce power ...
By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).
-
Water Measurement Monitors for Monitoring Gas Condensates
Oil companies might discharge produced water from their facilities to a local sea or inject it into a production or disposal formation, depending on local requirements. The discharged water quality at these facilities must be monitored for oil concentration to control process upsets and environmental issues. When oil field operators want to monitor the performance of their water treatment system, they have the choice to use the regulatory method or a field method. The field methods are generally faster and easier ...
By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).
-
Sample handling solutions for oil in water analyzer sector
The Oil in Water Analyzer combines the PX2+ with our Front Surface Fluorescence Probe to create an analyzer that continuously and accurately measures the presence of oil in water. The all-inclusive Oil in Water Analyzer come preassembled with a PX2+ photometer attached to our Front Surface Fluorescence Probe via fiber optic cables. The analyzer is less susceptible to noise due to bubbles, reabsorption, and turbidity in the sample. The Oil in Water Analyzer is the ideal solution for your in-line process monitoring ...
By Custom Sensors & Technology (CST) based in Fenton, MISSOURI (USA).
-
Water Measurement Monitors for Monitoring Hydroelectric Dam Sumps
The Problem: To protect the river environment, the sumps at some advanced locations have oil in water separation systems and oil in water monitors. The installation of a TD-4100 series monitor in these applications is very simple. All that is needed is a properly plumbed sample stream and a way to drain the water back to the sump. A dry air supply is also needed to prevent fogging within the non-contact falling stream flow ...
By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).
-
Water Measurement Monitors for Advanced Treatment of Produced Water for Crop Irrigation
The Situation: California is currently facing one of the most severe droughts in recorded history. In order to mitigate the drought conditions, various water conservation measures have already been implemented, and others are being considered. One method under consideration is using the advanced treatment of produced water to make it available for irrigation. A major challenge to the success of this method is economically treating the produced water to achieve the quality mandated by California’s irrigation ...
By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).
-
Water Measurement Monitors for Monitoring Hydrocarbons in Bilge Water
The Situation: Various processes onboard ships, such as machinery wash-down, maintenance, and leakage, generate oily wastewater. This contaminated water flow collects in the bilge of the ship. Marine diesel, lubricating oils, grease, as well as other contaminants may be present in bilge water. The bilge water is discharged overboard, with oil and grease concentrations in the discharged water limited by national and international ...
By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you