Eijkelkamp Water Monitoring Equipment Available In Bulgaria
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Vectran cable, Ø 1.6 mm, length per m. For installation of Diver in corrosive water. Fixing on monitoring well ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
DDC optical 1-eye PUR read-out cable for TD/Micro/Cera/CTD and Baro Divers, length 1 m. Suitable for monitoring wells from 1 inch diameter. For connection to a PC a communication cable DDC-USB is needed (art. 11114701). Warranty 2 years. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil sampling and classification set, standard set to a depth of 2 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Submersible pump "Gigant", ABS/Inox, Ø 36 mm, maximal capacity 11 l/min, pressure head lift 8.5 m (at final voltage 12 Volt), with strainer, with 5 m pvc coated cable, set of 3 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sample ring kit model E, with heavy duty sample ring holder for sampling in hard soils. Standard set for a depth of 2 m. For soil sample rings Ø 53 mm. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Flap gouge auger for depth specific samplings in dry or wet material, standard set to a depth of 2 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
RBC flumes are used to measure the quantity of water that, for instance, flows through an irrigation channel. By comparison to known flumes, such as the WSC- and the Parshall flume, the RBC flume is the most accurate. The RBC flume has been specially designed for use in smaller water ways or earthen channels (irrigation channels, in- outlets, furrow, ditches, etc.). The RBC flume is a simple and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Stone catcher: This auger type is used to remove loose stones from the auger ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Auger set for heterogeneous soils, standard set for augerings to a depth of 5 m. With unpainted augers for environmental ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sampler for suspended sediment, type "Watertrap". Standard set for sampling to a depth of 25 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The plunging siphon is a very simple instrument for sampling of homogeneous fluids from vessels, tanks, containers (for instance tank lorries) and basins. As glass plunging siphons tend to break easily the unbreakable translucent teflon is applied. The inert teflon is not affected by chemicals avoiding the sample to be contaminated by the equipment. The plunging siphon is heat resistant to a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
In many land use systems worldwide soil deformation is a major problem arising from increasing land use intensity. Altered soil functions, in particular reduced hydraulic conductivities and impeded aeration, influence the top soil layers. This has an important effect on vulnerability to erosion, in particular. Assessing very thin soil layers like soil crusts requires very sensitive and highly ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Monitoring well lock to lock monitoring wells with an inner Ø of 28 mm (total range 27-29 mm), with vandalism proof inner socket head screw, hexagonal. Also suitable for installation of the DIVER in a monitoring well. Set of 3 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The hand-operated peristaltic pump is a very reliable apparatus that is used for pumping of gasses and fluids. The pump used is a simple, but very durable, peristaltic pump with three pressure rollers. The bearings of the drive shaft and the pressure rollers are waterresistant. The pump can deliver a pump pressure of 3 bar (thus also suitable for use with in-line filters) and an underpressure ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are installed in the soil. The profile probe is fitted with 6 measuring elements with a measuring range of 100 cm so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe measures with an accuracy of ± 3% in a thin-walled tube and has a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The profile sampler allows taking of a sizeable and virtually undisturbed sample up to a depth of approximately 40 cm (10 cm wide and 5 cm across). All roots, up to a cross-section of 2 cm, are included in the sample. When sampling, both U-shaped gutters are pushed alternatingly into the soil, until the required depth is reached, after which one side of the handle is pulled sharply upwards and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Monitoring well datalogger type Micro-Diver for measuring and recording groundwater levels/temperatures. Range 10 m, -20 till +80 °C. Memory 48000 measurements. Dimensions 18 x 90 mm. Pressure sensor: ceramic. Housing: stainless steel 316L. Accuracy 0.15%/10 m, +0,1 °C, temperature compensated 0/+40 °C. Warranty 1 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The bailer samplers of rigid transparent teflon are supplied in various sizes and diameters. A special teflon coated cable can be delivered for lowering and raising the samplers. For all sizes a teflon emptying device is available to allow drainage of the sampler without any aeration or turbulence. HDPE and pvc disposable bailer samplers including bottom emptying device are also ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
10.94 Bentonite plugs, supplied in packs. 10.95 Bentonite plugs in pallet packages. Bentonite plugs are used for sealing bores to prevent water mixing from different aquifers, after ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This bi-partite gouge auger distinguishes itself from other gouges by the cylindrical tapered cutting head at the bottom side of the gouge that, when the auger is pushed into the soil, cuts a cylinder shaped piece from the soil. As a result the auger does not need to be revolved around its axis after being inserted, as the other gouge augers need to be (less sensitive to torsion). The tapered ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you