Eijkelkamp Water Monitoring Equipment Available In Czech Republic
-
ShowcaseManufactured by Royal Eijkelkampbased in NETHERLANDS
Auger set for heterogeneous soils, standard set for augerings to a depth of 5 m. With unpainted augers for environmental ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The profile sampler allows taking of a sizeable and virtually undisturbed sample up to a depth of approximately 40 cm (10 cm wide and 5 cm across). All roots, up to a cross-section of 2 cm, are included in the sample. When sampling, both U-shaped gutters are pushed alternatingly into the soil, until the required depth is reached, after which one side of the handle is pulled sharply upwards and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With these sets, with bayonet connection, undisturbed soil samples can be taken in a liner applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push/pull handle. The set contains, among other things: a hand auger for pre- and clean drilling of the bore hole, the core sampler with the sampler tubes, the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Hand-operated equipment can be applied for soil research up to a depth of 5 to 10 meter. In this product information leaflet a number of gouge augers are described. Their mutual quality is that they are all fitted with an almost half cylindrical operational part with parallel cutting edges running vertically, justifying the name gouge auger. This operational part may vary in length as well as in ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This bi-partite gouge auger distinguishes itself from other gouges by the cylindrical tapered cutting head at the bottom side of the gouge that, when the auger is pushed into the soil, cuts a cylinder shaped piece from the soil. As a result the auger does not need to be revolved around its axis after being inserted, as the other gouge augers need to be (less sensitive to torsion). The tapered ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
In case of direct measurement in the field the auger hole method according to Hooghoudt can be applied.Following this method the determination of the permeability to water of a soil takes little time (by comparison to other methods), requires a limited number of ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Thetaprobe is also available in the form of a profile probe for use in thin-walled tubes that are installed in the soil. The profile probe is fitted with 4 measuring elements with a measuring range of 40 cm, so that the soil moisture content can be measured at different depths within a vertical soil profile. The probe measures with an accuracy of ± 3% in a thin-walled tube and has a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Multisampler, rod operated, standard set, for sampling to a depth of 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This translucent teflon and stainless steel sampler is specially suitable for the indication of layers, measuring the thickness of the floating layer and the sampling of drums, tanks on lorries, gully holes and shallow oil separators. With the liquid layer sampler also depth specific samples can be taken. The translucent sample tube allows for immediate research in the field of for instance the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Stopper for installation of Diver communication cable in PVC monitoring well pipe 40 x 36 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Submersible pump "Gigant", ABS/Inox, Ø 36 mm, maximal capacity 11 l/min, pressure head lift 8.5 m (at final voltage 12 Volt), with strainer, with 5 m pvc coated cable, set of 3 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
10.94 Bentonite plugs, supplied in packs. 10.95 Bentonite plugs in pallet packages. Bentonite plugs are used for sealing bores to prevent water mixing from different aquifers, after ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sample ring kit model C, standard set to a depth of 2 m. For soil sample rings Ø 53 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil sampling and classification set, standard set to a depth of 2 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Monitoring well lock to lock monitoring wells with an inner Ø of 36 mm (total range 35-37 mm), with vandalism proof inner socket head screw, hexagonal. Also suitable for installation of the DIVER in a monitoring well. Set of 3 pieces. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This low cost submersible pump set is suitable for use in monitoring wells with a diameter of minimal 40 mm. The set includes three submersible pumps “Gigant”, three booster pumps, a roll of extension cable, sealed crimp splices (to make a waterproof cable extension), a roll of polyethylene sampling tube and a battery with battery charger. Both pumps are small centrifugal pumps with ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This self-priming (up to a depth of 6 meter) centrifugal pump is used primarily for (fast) purging or emptying of monitoring wells and bore holes. Other applications are pumping water for irrigation, drinking water for cattle, etc. The pump has a quiet, reliable starting, economical fourstroke engine running on ordinary or unleaded petrol. The pump is not sensitive to polluted water and the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Winches are used for lifting and hoisting activities in the field. They are fixed to one of the legs or to the frame of a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The typical design of the Edelman auger allows for a minimum of friction during penetration into the soil, and the extraction of the auger from the soil, which means less physical effort. To achieve optimal results, the auger type should be chosen in respect of the soil type in question. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The visibility disc according to Secchi is a simple, although not very accurate, means of determining the visibility depth. The visibility disc is lowered into the water with a wire. When the disc is no longer visible in the water, a reading of the depth is made by means of the marks on the rope. The disc is lowered another 0.5 meter and is pulled up slowly. The second reading is done when the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you