Water Monitoring Equipment With Ultrasonic Level & Flow Instrumentation For UV Flume Or Tank Applications Applications Available In Iceland
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
The dB Transducer series from Pulsar Measurement is a range of level sensors for wastewater and industrial environments. Ranging from 3 m (9.8 f) to 50 m (164 ft) all of our ultrasonic level sensors provide a reliable level, volume, open channel flow, pump control, and differential level measurement for both liquid and solid applications. The dB ultrasonic level transducer range benefits from ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
The area-velocity flow measurement method is the most common method of all flow measurements. The Greyline Area-Velocity Flow Meter uses a submerged ultrasonic sensor measuring both level and velocity of flowing liquid to calculate flow measurement in an open channel or pipe. The sensors are mounted either inside a pipe or at the bottom of a channel. Just enter the pipe diameter or channel ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
The Greyline OCF 6.1 is an open channel flow meter that doubles as a tank level meter, making it a perfect solution for non-contacting flow and level measurement. The non-contacting open channel flow meter is able to continuously monitor, display, totalize, and data log flow through any flume or weir. The ultrasonic sensor supplied with the OCF 6.1 mounts just 203.2 mm (8 in) above the flowing ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
The MicroFlow-i is a non-contacting velocity measurement solution. Its extremely low power consumption makes it an ideal velocity measurement solution to remote sewer network access points that are difficult to reach and often have no mains power supply. Combine the MicroFlow-i with a dBi Intelligent Transducer for a complete, low power, non-contacting velocity area measurement solution. These ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
Wastewater level monitoring made simple with the intelligent dBi HART level sensors from Pulsar Measurement. The dBi HART transducers are a range of self-contained, intelligent, non-contacting level sensors. Making use of HART protocols makes integration with existing site systems quick, simple, and easy. These non-contacting, ultrasonic level transducers can be used as stand-alone devices or as ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
It's ideal for flow troubleshooting, balancing and checking performance of permanent flow meters. The new PDFM 5.1 is fast and easy to operate – you can mount the sensor on the outside of a pipe in less than a minute. Use the built-in keypad and calibration menu to set up the flowmeter for your application. The PDFM 5 works on any liquid containing bubbles or solids and is recommended for ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
The dBi Profibus series transducers are a range of non-contacting, ultrasonic level sensors that make use of the widely used Profibus Protocols. The self-contained level sensors are available in a variety of different measurement ranges ranging from 125 mm to 15 m (4.9 in to 49.2 ft) to suit a wide range of applications from wastewater level measurement to industrial level ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
MicroFlow delivers accurate, repeatable velocity measurement of liquid flow, either as a stand-alone device or as part of a complete measurement system. MicroFlow builds on Pulsar's award-winning pipe flow technology and world-leading open channel flow measurement ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you