Sediment Core (Sediment Coring) Equipment
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Hand vacuum pump with large coupling connection (female) with carabine ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sediment core sampler type Beeker, rod operated, with closable cutting head and piston. Standard set for sampling and discharging core samples, length 1 m, in bucket or jars. Suitable for sampling submerged soils to a depth of 5 m of very watery sediment to non-consolidated sand. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Toolbag with appropriate tools for sediment core sampler type ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Collar for sediment core sampler type Beeker with conical ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Core point to scan the lower boundary of the sediment ...
-
PremiumManufactured by InterOcean Systems LLCbased in USA
The Series 10031-M Multi-Purpose Hydrographic Winch is compact and portable, engineered for long-term durability, and reliability necessary for towing geotechnical equipment such as side-scan sonars, sub-bottom profilers, and magnetometers. It is also used for geophysical applications such as sediment sampling and coring, in ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Piston, double action, with scraper rubbers, Ø 56 mm, for sample tube sediment core sampler type ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
for the measuring rods so that depth measurements in the sediment can be taken at an angle. A stainless steel grid and core point make it possible to probe the lower boundary of the sediment layer. The set is presented in a carrier carrying ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Discharge and partitioning system for sediment core sampler type Beeker. For connection to the mains drinking water network. Exclusive tripod. Inclusive tube holder, 9 rubber stops and lipped rings, insertion plate, pressure tube with clamp plug and tubes, sealing spatula, caps and rubber ...
-
PremiumManufactured by CETCObased in USA
Reliable and adaptable REACTIVE CORE MAT gives you the versatility for underwater containment mitigation when shallows and slopes rule out the use of other sediment treatments. It goes where you need ...
-
Manufactured by Qingdao Watertools Technology Co., Ltd.based in CHINA
The KC Kajak Sediment Core sampler is based on the Kajak design and can be used as line operated as well as hand operated sampler. With a wide range of accessories the system can be adjusted for various ...
-
Manufactured by KC-Denmark A/Sbased in DENMARK
Antenna for radio or satellite beacons. The flash and radar reflector are manufactured from reinforced fibre glass with a bend restrictor at the base The autonomous vehicles can be equipped with units for: water column profiling, chamber incubation, micro profiling over the sediment-water interface, sediment core catching, water ...
-
Manufactured by Hoskin Scientific Limitedbased in CANADA
E365-0423SA: Sediment core sampler type Beeker, rod operated, with closable cutting head and piston. Standard set for sampling and discharging core samples, length 1 m, in bucket or jars. Suitable for sampling submerged soils to a depth of 5 m of very watery sediment to non- consolidated ...
-
by Partrac Ltdbased in UNITED KINGDOM
The Cohesive Strength Meter (CSM) is a portable instrument used to measure the critical entrainment stress, erosion rate and settling velocity of bedded (deposited) muddy sediments. It has found widespread application in intertidal and fluvial environments, in agricultural research programmes, and for the measurement of sediment ...
-
Manufactured by GF Instruments, s.r.o.based in CZECH REPUBLIC
Automatic laboratory device for precise gamma-ray and magnetic susceptibility measurements on drill cores and sediment ...
-
Manufactured by Aquatic Research Instruments (ARI)based in USA
Paleoecological analysis of bog and salt marsh sediments. Collection of uncompressed cores in poorly decomposed woody peat. Shallow water ...
-
Manufactured by Halltech Environmental and Aquatic Research Inc.based in CANADA
For Paleoecological Analysis of bog and salt march sediments, collection of uncompressed cores in poorly decomposed woody peat, and shallow water applications. Constructed of 5.4 cm O.D. 2 mm wall Stainless Steel, 50 cm long core tube of this apparatus is designed to cut through sediments as it is turned. A solid Delrin bottom ...
-
based in USA
The Quin Delta is outfitted with the Mobile B80 drill rig for geotechnical and environmental offshore drilling. The B-80 is equipped with an automatic SPT hammer and can be used to perform SPT sampling and split spoon sampling. The rig can also be equipped with Gregg’s OW coring systems and used for sediment and rock ...
-
Manufactured by Geotek Ltdbased in UNITED KINGDOM
a modular configuration allowing for a range of petrophysical and geochemical sensor technology to be integrated onto one core scanning system, producing a single depth co-registered data set. The MSCL-S may accept either whole/split unconsolidated sediment cores in liners, or whole/slabbed rock cores with or without a liner. ...
-
based in USA
Macro-Core Soil Sampler This sampling device works best in medium-to fine-grained cohesive, silt, clay and geoprobeunconsolidated sediments. The Macro-Core Sampler can also be used successfully in sampling medium-to coarse-grained sandy materials with some fine to medium gravels when core catchers are ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you