Sediment Monitoring Equipment For Water Monitoring Available In Georgia
-
ShowcaseManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in dirty water, measuring a TSS range of 0 – 10 g/L (SiO2). The S-series are immersion sensors and they use direct attenuated light to measure both TSS and turbidity ...
-
ShowcaseManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in reasonably clean water, measuring a TSS range of 0 – 2.5 g/L (SiO2). The S-series are immersion sensors and they use direct attenuated light to measure both TSS and turbidity ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Contactless flow measurement for open channels and part filled ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
Lamellar settler is designed for the continuous separation of sediments from water and they have two basic purposes: to increase the settling area and to obtain a laminar ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Bed-load transport meter frame with stabilising tail fin and ...
-
PremiumManufactured by AMS, Inc.based in USA
The NEW AMS Replaceable Tip Sand/Loose Sediment Soil Probe is ideal for obtaining unconsolidated soil samples in a 1” x 24” poly ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Suitable for applications featuring high velocities and low levels. OFR Radar - contactless flow measurement: Suitable for applications featuring high velocities and low levels. By developing the OFR radar sensor in combination with our previous product range we are capable of providing the best possible measurement solution to detect any kinds of flow in each application. Whether for measurement ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
The Aanderaa Turbidity Sensors detects infra-red light scattered by particles suspended in water. The Aanderaa Turbidity Sensor is based on the Seapoint Turbidity Meter. The sensor detects light scattered by particles suspended in water. This measurement is known to have a good correlation to the amount of suspended matter in water and can be used to monitor e.g. sediment, algae or particle ...
-
PremiumManufactured by AMS, Inc.based in USA
Professional Series Multi-Stage Sediment/Sludge Sampler Kit! This sampling kit provides all of the components needed to collect sludge and sediment samples 3” in diameter & up to 24” in length. The 12" long (female/female threaded) base section and (1) extra 12” (male/female threaded) body section allows you to assemble a sampler that is 24” in length. This kit was ...
-
PremiumManufactured by AMS, Inc.based in USA
Stops caving sediment! Use this manually-driven sampler for discrete interval sediment sampling in rivers, lakes, wetlands, and estuaries. To obtain a sample, the sampler is lowered to the surface as a dual tube or driven down to the desired depth where sampling is to begin below the surface. Upon reaching the desired sampling depth, the inner rods attached to the internal drive tip are retracted ...
-
ShowcaseManufactured by Elvatech Ltd.based in UKRAINE
ElvaX Plus spectrometer is a desktop energy-dispersive X-ray fluorescence (EDXRF) analyzer with extended element range from Na (Z=11) to U (Z=92). The Helium purge system and the automatic primary filter changer combined with the large area SDD detector are used to allow effective registration of the light elements spectra. ElvaX Plus spectrometer is used for quantitative and qualitative analysis ...
-
PremiumManufactured by AMS, Inc.based in USA
The Russian Peat Borer is a side filling chambered-type sampler. This discrete point sampler enables one to drive the sampler to any point in the sediment profile in the closed (empty) position. Once the target depth is reached, the “T” handle is turned clockwise to initiate the sampling while the pivotal cover plate supports the cutting action of the bore. As the sampler is turned ...
-
PremiumManufactured by AMS, Inc.based in USA
Spring-loaded! The AMS all stainless steel Ekman dredge is spring-loaded with a messenger that travels down the rope and trips the dredge to ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Contactless flow measurement for open channels and part filled pipes. The contactless low-maintenance radar sensor provides reliable operation even at very high discharge velocities with low flow levels. Dynamic hydraulic models for various channel shapes based on varying filling levels enable accurate detection of the real flow rate. Introducing the NivuFlow 7550 we provide a transmitter for ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Multisampler, rod operated, standard set, for sampling to a depth of 5 ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
The SedVac system features an innovative design capable of maintaining flow rates while resisting clogs. It handles heavy sediment and grit that traditional vacuum pipe systems leave behind, increasing plant capacity with minimal structural changes. The SedVac Sediment Dredge System is a sediment removal system designed to clean your clarifier by effectively removing the compression zone layer of ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Suspended load sampler, Delft bottle type, inclusive accessories and spare ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Hybrid Flow Measurement with Surface Radar and Ultrasonic Profile Scanner. Flow measurement for open channels as well as part filled pipes. Optimum results through combination of ultrasonic cross correlation and radar ...
-
PremiumManufactured by AMS, Inc.based in USA
The Russian Peat Borer (7.5 cm x 60cm model shown) is a side filling chambered-type sampler. This discrete point sampler enables one to drive the sampler to any point in the sediment profile in the closed (empty) position. Once the target depth is reached, the “T” handle is turned clockwise to initiate the sampling while the pivotal cover plate supports the cutting action of the ...
-
PremiumManufactured by AMS, Inc.based in USA
The NEW AMS Replaceable Tip Sand/Loose Sediment Soil Probe is ideal for obtaining unconsolidated soil samples in a 1” x 24” poly liner. The soil probe is equipped with a 1” core catcher which ensures full sample recovery in the proper soil conditions. Probe includes 1” x 24” Probe body, 10” comfortably gripped cross handle, replaceable tip, 1” core ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you