Sediment Sampling Equipment For Water Monitoring Available In Estonia
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Collar for sediment core sampler type Beeker with conical ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sediment level stave, length 1 m, anodized aluminium with screw thread connection, diameter 25 mm, graduation in half ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This grab is intended for use in soft sediment that is free from plant growth. Two thin hinging flaps are open while the grab is lowered. The flaps close when a drop-weight is dropped (cable operated) or a button is pressed (rod operated). Samples can, therefore, also be taken from very soft top layers. The pressure of the sample prevents much loss of material. Nevertheless, small stones or ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With these sets, with conical screwthread connection, undisturbed soil samples can be taken in a thin walled tube applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push-/pull handle. In hard soils the sampler tube can be driven into the soil using the hammer with two nylon heads (shock-absorbing) or ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Piston rod with detachable handle for sample tube 1 ...
-
PremiumManufactured by AMS, Inc.based in USA
The Russian Peat Borer is a side filling chambered-type sampler. This discrete point sampler enables one to drive the sampler to any point in the sediment profile in the closed (empty) position. Once the target depth is reached, the “T” handle is turned clockwise to initiate the sampling while the pivotal cover plate supports the cutting action of the bore. As the sampler is turned ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Bed-load transport meter frame with stabilising tail fin and ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Van Veen grab (stainless steel), contents 0.5 litres, surface covered 126 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Piston sampler (inclusive transport tube and sample gutter) bottom part, operational length 150 cm, ...
-
PremiumManufactured by AMS, Inc.based in USA
The Russian Peat Borer (7.5 cm x 60cm model shown) is a side filling chambered-type sampler. This discrete point sampler enables one to drive the sampler to any point in the sediment profile in the closed (empty) position. Once the target depth is reached, the “T” handle is turned clockwise to initiate the sampling while the pivotal cover plate supports the cutting action of the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Kemmerer water sampler (vertical water bottle) is used for general water sampling in lakes, channels, wells and the sea. This sampler consists entirely out of plastic parts so that there is no risk of the sample coming into contact with metal. The Kemmerer water sampler holds 1.2 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Acrylic sample tube, with steel cutting shoe, Ø 76 x 66 mm, leng th 100 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sample tube, Ø 63x57mm, length 150 cm, pvc transparant, inclusive covers, set of 3 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Stainless steel ball, Ø 25 ...
-
PremiumManufactured by AMS, Inc.based in USA
Professional Series Multi-Stage Sediment/Sludge Sampler Kit! This sampling kit provides all of the components needed to collect sludge and sediment samples 3” in diameter & up to 24” in length. The 12" long (female/female threaded) base section and (1) extra 12” (male/female threaded) body section allows you to assemble a sampler that is 24” in length. This kit was ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Hose reel with 10 m hose with large quick connect ...
-
PremiumManufactured by AMS, Inc.based in USA
Specifically designed to retain non-cohesive sludge samples. Similar to the AMS soil core sampler, this sampler comes with core and auger tips that have been fitted with valves for retention of high quality soil core samples in non-cohesive, saturated materials. Versatile and easy to use for collection of either cored or augered samples of non-cohesive saturated materials in a ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Multisampler, rod operated, standard set, for sampling to a depth of 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Van Dorn water sampler (horizontal water bottle) has been specially designed for the sampling of open water. As a result of the material choice, it is also suitable for sampling coastal waters and for the analysis for heavy metals. The horizontal water flow through is not hindered by constrictions so that no appreciable contamination can occur in shallow water. As a result, the sampler is ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The sediment level stave is part of a standard set for measuring the depth of a sediment layer 4 metres. The set comprises 4 sediment measuring rods of anodic aluminium with screw couplings. The rods are 1 m long and have a diameter of 25 mm. The sediment measuring rods are marked out in 5 cm markings. The set also includes an elbow fitting for the measuring rods so that depth measurements in the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you