Sediment Sampling Equipment For Water Monitoring Available In Poland
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Van Dorn water sampler (horizontal water bottle) has been specially designed for the sampling of open water. As a result of the material choice, it is also suitable for sampling coastal waters and for the analysis for heavy metals. The horizontal water flow through is not hindered by constrictions so that no appreciable contamination can occur in shallow water. As a result, the sampler is ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Van Veen grab (stainless steel), contents 2 litres, surface covered ca. 260 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Frame for suspended load sampler Delft bottle type, to be used to take samples at distances of 10, 20, 30, 40 and 50 cm from the ...
-
PremiumManufactured by AMS, Inc.based in USA
Easily collect sediment or sludge with a technically enhanced core tip and cap. The AMS "valved core tip" fills the sampler without losing the sample upon retrieval. The sampler uses a disposable plastic soil catcher that fits on the end of a 2" x 12" plastic liner. The core tip allows the plastic soil core catcher and liner to fit snuggly over the lip of the core tip. Once the soil core catacher ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sampling tube for multisampler acrylic, Ø 50 x 5 mm, length 1 m, contents 1.14 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Suspended load sampler, Delft bottle type, standard set for sampling particles larger than 50 mu. Applicable in velocities till 2.5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Aluminium tripod with 5/8" ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Toolbag with appropriate tools for sediment core sampler type ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The visibility disc according to Secchi is a simple, although not very accurate, means of determining the visibility depth. The visibility disc is lowered into the water with a wire. When the disc is no longer visible in the water, a reading of the depth is made by means of the marks on the rope. The disc is lowered another 0.5 meter and is pulled up slowly. The second reading is done when the ...
-
PremiumManufactured by AMS, Inc.based in USA
Spring-loaded! The AMS all stainless steel Ekman dredge is spring-loaded with a messenger that travels down the rope and trips the dredge to ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Piston sampler (inclusive transport tube and sampler gutter) bottom part, operational length 200 cm, ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sediment core sampler type Beeker, rod operated, with closable cutting head and piston. Standard set for sampling and discharging core samples, length 1 m, in bucket or jars. Suitable for sampling submerged soils to a depth of 5 m of very watery sediment to non-consolidated sand. ...
-
PremiumManufactured by AMS, Inc.based in USA
Professional Series Multi-Stage Sediment/Sludge Sampler Kit! This sampling kit provides all of the components needed to collect sludge and sediment samples 3” in diameter & up to 24” in length. The 12" long (female/female threaded) base section and (1) extra 12” (male/female threaded) body section allows you to assemble a sampler that is 24” in length. This kit was ...
-
PremiumManufactured by AMS, Inc.based in USA
Easily sample most types of bottom surfaces. Constructed from stainless steel and powder-coated carbon steel for corrosion resistance. The top of the sampling chamber is screened to allow water flow during deployment and reduce the frontal shock wave that may displace sediment as the dredge contacts the sample surface. A two-way spring-loaded mechanism activates on contact with the bottom, no ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Cutting head inclusive steel strips for sample tube 1 m, with air hose with large quick connect ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Van Veen grab (stainless steel), contents 6 litres, surface covered ca. 480 ...
-
PremiumManufactured by AMS, Inc.based in USA
Easily collect sediment or sludge with a technically enhanced core tip and cap. The AMS "valved core tip" fills the sampler without losing the sample upon retrieval. The sampler uses a disposable plastic soil catcher that fits on the end of a 3" x 12" plastic liner. The core tip allows the plastic soil core catcher and liner to fit snuggly over the lip of the core tip. Once the soil core catcher ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Piston rod with detachable handle for sample tube 1 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Breakpoint for sediment level stave, hinged part to measure the sediment layer ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Multisampler, rod operated, transparent acrylic, Ø 50 mm, length 1 m, contents 1.14 l, bayonet (inclusive 1 sharp cutting head and 1 cutting head with ball valve seating and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you