Stormwater Monitoring Equipment For Water Monitoring In Australia
-
ShowcaseManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in dirty water, measuring a TSS range of 0 – 10 g/L (SiO2). The S-series are immersion sensors and they use direct attenuated light to measure both TSS and turbidity ...
-
ShowcaseManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in reasonably clean water, measuring a TSS range of 0 – 2.5 g/L (SiO2). The S-series are immersion sensors and they use direct attenuated light to measure both TSS and turbidity ...
-
Manufactured by mOOvementbased in AUSTRALIA
Tipping bucket rain gauge - 18 cm x 18 cm x 39 cm. Accuracy: 2% up to 25 mm/hr. 3% up to 50 mm/hr. Resolution: 0.1 mm per tip and Catchment area: 200 cm2. Uses 2 x C type alkaline ...
-
Manufactured by MACEbased in AUSTRALIA
HVFlo features MACE field proven Doppler velocity and level measurement sensors. Advanced spectrum signal processing allows HVFlo to produce superior results under a very wide range of hydraulic operating conditions. Even under full pipe, surcharge, or reverse flow conditions, HVFlo will produce accurate, repeatable results every time. HVFlo offers optional telemetry interface for long-term ...
-
Manufactured by Metaspherebased in UNITED KINGDOM
Metasphere is one of the world's leading providers of permanent monitoring solutions for wastewater networks, with an intrinsic understanding of networks, and the complex and aggressive nature of the environment and these related assets. From the requirements for safety certifications to underground installations, Metasphere has the skills and knowledge in-house to provide a range of solutions, ...
-
Manufactured by Xylem Analyticsbased in USA
YSI has used its long experience in water quality monitoring to develop the ultimate multiparameter sondes for challenging marine and freshwater conditions. Users can choose the new EXO1 sonde, with ports for 4 sensors, or the new EXO2 sonde, with 6 ports and a central anti-fouling wiper. Parameters include: Temperature, Conductivity, Depth, Dissolved Oxygen, pH, ORP, Total Algae (Blue-green ...
-
Manufactured by Everhard Industriesbased in AUSTRALIA
The Trash Screen filters stormwater entering the Pit through the Grate, retaining the collected trash while allowing unrestricted passage of water travelling through pipes connected into the Pit. ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
The HydraSieve is a simple, highly efficient screen, designed for solid/liquid separation. Thousands of worldwide installations on all types of applications prove its ...
-
Manufactured by Environdatabased in AUSTRALIA
The RG30 & RG35 series of logging rain gauges (which replace the RG20) are compact, robust, automatic rain gauges. They consist of a full sized tipping bucket rain gauge rainfall sensor, powerful data logger, rechargeable battery, and mounting post with levelling bracket. A solar panel, upgrade to a tripod for portability and software can be added as needed. If you need telemetry for remote ...
-
PremiumManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in clean water, measuring a TSS range of 0 – 0.75 g/L (SiO2) and a turbidity range of 0 – 1,000 NTU. The T-series are immersion sensors and they use nephelometry (90 degree scattered light) and direct attenuated light to measure both TSS and turbidity ...
-
Manufactured by NECi Superior Enzymesbased in USA
These kits require the use of NECi's Handheld Photometer, results are not colorimetric. Quick and Reliable Results, Easy to Use, Environmentally Benign. Use these test kit reagent refills with our handheld dual-wavelength photometer to measure phosphate levels in various types of aqueous samples, including municipal and industrial wastewater, agricultural runoff, and more. Monitor non-point ...
-
Manufactured by Stevens Water Monitoring Systems, Inc.based in USA
The tipping bucket rain gauge is recognized as the standard for measuring rainfall and other precipitation in remote and unattended ...
-
Manufactured by Aquaread Limitedbased in UNITED KINGDOM
The LeveLine-CTD is a water level, temperature, conductivity and salinity recording device that has been specifically designed for long term water level logging. It is made from titanium making it suitable for deployment in all water ...
-
Manufactured by SeaMetrics, Inc.based in USA
NW’s AquiStar® PT2X is ideal for observing flow patterns, testing pumps, and monitoring groundwater, well, tank and tidal levels. A pressure and temperature sensor with integrated datalogging, this sensor is constructed with 316 stainless steel, fluoropolymer, PTFE—providing highly accurate readings in rugged and corrosive field ...
-
Manufactured by Van Essen Instruments - part of Nova Metrix LLCbased in NETHERLANDS
The TD-Diver is a submersible datalogger for long-term uninterrupted, real-time water level monitoring using a pressure sensor when submerged at a fixed level under the water surface. The pressure sensor measures the equivalent hydrostatic pressure of the water above the sensor diaphragm to calculate the total water depth. The Diver autonomously measures pressure and temperature and records them ...
-
Manufactured by SeaMetrics, Inc.based in USA
Converts analog signals into digital signals 7 standard channels Integrated datalogger collects over 25,000 records Modbus and SDI-12 protocols The GDL is a plugin that can make many of your existing sensors into Smart Sensors.With a simple attachment, the GDL adds datalogging and powerful communication features to your equipment. Whether your devices are analog or digital, our GDL dataloggers ...
-
Manufactured by NECi Superior Enzymesbased in USA
Measure Soluble Reactive Phosphate On-Site. These kits require the use of NECi's Handheld Photometer, results are not colorimetric. Quick and Reliable Results, Easy to Use, Environmentally Benign. Use these test kit reagent refills with our handheld dual-wavelength photometer to measure phosphate levels in various types of aqueous samples, including municipal and industrial wastewater, ...
-
Manufactured by Seapoint Sensors, Inc.based in USA
The Seapoint Turbidity Meter detects light scattered by particles suspended in water, generating an output voltage proportional to turbidity or suspended solids. The low power requirements make it ideal for applications where battery drain is a concern. Range is selected by two digital lines which can be hard wired or microprocessor controlled, thereby choosing the appropriate range and ...
-
Manufactured by Stevens Water Monitoring Systems, Inc.based in USA
The tipping bucket rain gage is recognized as the standard for measuring rainfall and other precipitation in remote and unattended locations. The integrated siphon mechanism delivers high levels of accuracy across a broad range of rainfall intensities. Each unit consists of a collector funnel with stainless steel leaf filter, an integrated siphon control mechanism, an outer enclosure with quick ...
-
Manufactured by Hach - Veraltobased in USA
Storm Water Test Kit a Water Quality Multi-Parameter Kit - Model: SW-1. Model SW-1 with Color Discs and pH Pocket Pal(TM) Tester: The Storm Water Test Kit is ideal for on-site or laboratory monitoring of storm sewer outflow and industrial discharge. The kit includes all includes all necessary reagents and apparatus for monitoring detergents, total chlorine, copper, and phenols. Also included is a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you