Suspended Solids Monitoring Equipment For Water Monitoring Available In Vietnam
-
ShowcaseManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in dirty water, measuring a TSS range of 0 – 10 g/L (SiO2). The S-series are immersion sensors and they use direct attenuated light to measure both TSS and turbidity ...
-
PremiumManufactured by Real Tech Inc.based in CANADA
Real Tech’s bypass TSS Sensor provides affordable real-time measurement of total suspended solids (TSS) in water or wastewater. The TSS sensor provides superior measurement performance using LEDs. Designed to meet the needs of a wide array of site-specific conditions, the TL series offers multiple flow cell designs and sensor path length selections for the desired measurement ...
-
PremiumManufactured by Real Tech Inc.based in CANADA
Real Tech’s online TSS analyzer offers an affordable and accurate solution for real-time total suspended solids (TSS) monitoring. Benefiting from Real Tech’s innovative Split-Sense Pro technology, the need for calibration is limited lowering maintenance requirements. Several path length options provide solutions for the desired measurement range. Parameter(s): Total suspended solids ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
Spectrum plus filter uses two effective layers to achieve a greater level of performance. Nutshell media filters are commonly used in the treatment of produced water to reduce the oil and solids content of the water prior to injection for Enhanced Oil Recovery (EOR) or prior to subsequent treatment such as softening the water as feed to steam generators used in heavy oil production. However, ...
-
PremiumManufactured by Aanderaa, a Xylem Brandbased in NORWAY
The Aanderaa Turbidity Sensors detects infra-red light scattered by particles suspended in water. The Aanderaa Turbidity Sensor is based on the Seapoint Turbidity Meter. The sensor detects light scattered by particles suspended in water. This measurement is known to have a good correlation to the amount of suspended matter in water and can be used to monitor e.g. sediment, algae or particle ...
-
PremiumManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in clean water, measuring a TSS range of 0 – 0.75 g/L (SiO2) and a turbidity range of 0 – 1,000 NTU. The T-series are immersion sensors and they use nephelometry (90 degree scattered light) and direct attenuated light to measure both TSS and turbidity ...
-
ShowcaseManufactured by Phathombased in NEW ZEALAND
Designed for accuracy in reasonably clean water, measuring a TSS range of 0 – 2.5 g/L (SiO2). The S-series are immersion sensors and they use direct attenuated light to measure both TSS and turbidity ...
-
PremiumManufactured by Kovalus Separation Solutions, Inc.based in USA
ZLS is an alternative produced water treatment process promoted by Eco-Tec for SAGD (Steam Assisted Gravity Drainage) boiler feed water in the production of heavy oil, most typically in Western Canada. The process eliminates the need for the traditional practice of lime softening and its associated costs, large site footprint and operational challenges as a part the treatment process. Technical ...
-
Manufactured by Confab Instrumentationbased in USA
The Model 950 is a rugged inline suspended solids meter that monitors total suspended solids (TSS) in process pipes, open channels or tanks. Our inline measurements assure instantaneous response, maximum accuracy, and highest reliability without costly bypass systems. The monitor can be scaled from as low as 0-2000 PPM to as high as 0-20% ...
-
Manufactured by Calgon Carbon Corporationbased in USA
The DISPOSORB canisters have been developed by Calgon Carbon Corporation for rapid deployment and cleanup of low flow treatment applications such as off-spec products, accidental spills, wash water or runoff water treatment or temporary groundwater cleanups. The DISPOSORB canisters contain all of the design features of a full scale adsorber, but are easily transportable and are intended to be ...
-
Manufactured by Alken-Murray Corporationbased in USA
ALKEN CLEAR-FLO 4003 is a concentrated dry formulation of bacteria selectively adapted to the accelerated breakdown and removal of oily material (fats, grease and oil), whether of animal or vegetable origin. Floating and/or solidified oils and greases are a major cause of operating difficulties in wastewater treatment systems. Recently reformulated to include the key endospore-forming Bacillus ...
-
Manufactured by Shanghai Lianhua Industrial Co., Ltd.based in CHINA
Portable total suspended solids meter, easy for using in field situation.The detection range is 0-750mg/L, no reagents are needed, and the results can be displayed directly by ...
-
Manufactured by Pentair X-Flow BVbased in NETHERLANDS
The Compact 33V is a tubular 5.2 mm ultrafiltration membrane very well suited for the separation of biological sludge or any other high solids application in which high effluent quality is required. Separating at 0,03 micron, this membrane filter allows only water and dissolved matter to pass, rejecting everything that is undissolved. The filtrate can either be used directly in many applications, ...
-
Manufactured by EasyWaterbased in USA
The EasyWater Series C Closed Loop Treatment System provides a cost effective, low-maintenance, non-chemical treatment for controlling corrosion and scaling. Series C system removes dissolved oxygen, filters suspended solids to sub-micron levels, and prevents, as well as removes, insulating ...
-
Manufactured by Galvanic Applied Sciences Inc.based in CANADA
Sometimes liquids are too opaque or oily to monitor effectively with traditional optical-based technology. That’s where Galvanic’s acoustic-based products come in, delivering rugged, reliable, real-time results to optimize your processes and assure consistent quality and regulatory compliance. The Monitek family of turbidity and total suspended solid (TSS) monitors are ideal for ...
-
Manufactured by ZHOU ENSI LTDbased in CHINA
Adopting the optical principle of infrared light’s scattering and absorption, the transmitter could get the concertration of suspended solids and sludge. The MLSS sensor directs some focused beams into the monitored water, The light beams reflects off particles in the water, and the resultant light intensity is measured by the MLSS sensor's photodetector. The suspended solid concertration is ...
-
Manufactured by In-Situ Processbased in USA
The TurbiTechw² LA Sensor has been designed for use in aeration systems monitoring suspended solids also known as mixed liquor suspended solids or activated sludge where solids are typically in the range of 1,500 to 3,500 mg/l. The sensor can also measure Returned Activated Sludge (RAS), Surplus Activated Sludge (SAS) and suspended solids or turbidity. The fully automatic self cleaning ...
-
Manufactured by In-Situ Processbased in USA
The TurbiTechw² LS Sensor is designed to monitor the levels of suspended solids or turbidity typically found in final effluent from municipal and industrial wastewater treatment plants. It is also great at monitoring solids in the intake to both effluent and drinking water treatment processes. Monitoring of these key parameters requires sensors that are reliable and accurate, the ...
-
Manufactured by Flowline Taiwan Co., Ltdbased in TAIWAN
TTB/TSS turbidity and suspended solids measuring sensor, electrode adopt scatter light (880nm LED), and with UPVC anti- rust material which can last longer. Background lighting compensate; signal average of 1500 reading of isolated output preventing larger particle interfere to form a stable ...
-
Manufactured by Meacon Automationbased in CHINA
SUP-PTU200 Suspended Solids Meter based on the infrared absorption scattered light method and combined with the application of ISO7027 method, can guarantee the continuous and accurate detection of suspended solids and sludge concentration. Based on ISO7027, infrared double scattering light technology will not be affected by chroma for the measurement of cuspended colids and cludge concentration ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you