Wastewater Flow Monitoring Equipment For Water Monitoring In Canada
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The DWM 1000 is a 2-wire electromagnetic flow controller to monitor the flow of conductive liquids, pastes and slurries. The switching point of this insertion-type device is adjustable over a full-scale range of 0.1 …9.9 m/s or 0.3…32.5 ft/s. A welding socket is supplied as standard for welding the DWM 1000 directly onto process pipes (DN50…400 / 2…16"). The long ...
-
PremiumManufactured by Landustrie Sneek BVbased in NETHERLANDS
In order to meet high requirements for flexibility, capability, operational reliability, operating costs and the environmental demands of minimal noise and aerosol generation, Landustrie developed the Landox channel aeration ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
P-Series sensors are suitable for continuous level measurement in the water and wastewater sector. For connection to NivuMaster-Series evaluation units. Suitable for harsh ambient ...
-
PremiumManufactured by Hydro Quip, Inc. (HQI)based in USA
The continuous flow Inclined Plate Clarifier with Mix & Flocc Tank separates mechanical and chemical emulsions and colloidal contaminants from wastewater as a single flow-through operation. The use of polymers or other chemical additives will help precipitate the contaminants to the hopper compartment for ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Available with various diameters and lengths. For sensor installation for reliable flow detection in part-filled and full pressurised ...
-
PremiumManufactured by Excalibur Water Systems Inc.based in CANADA
Duplex Parallel models offer a multi-tank continuous, uninterrupted supply flow of scale-control conditioned water. Utilizing Soft-tec® resin, flex bed, recirculation pump for low flow conditions, upflow design, no regeneration, and wastewater ...
-
PremiumManufactured by Trojan Technologies - Veraltobased in CANADA
Our smallest wastewater system in terms of flow-handling, the TrojanUV3000™PTP is ideally suited to treat flows up to 2.8 MGD (441.6 m3/hr). The TrojanUV3000™PTP can be equipped with pre-fabricated stainless steel channels and transition boxes for in-line integration with existing flanged piping – thus minimizing engineering and installation costs. It can be easily retrofitted ...
-
Manufactured by H2Flow Equipment Inc.based in CANADA
The TILT treatment plants are an innovative, radical departure from conventional wastewater treatment plants. Not only do they utilize modular ISO containers as the basis for the treatment plant, but H2FLOW has revolutionized the industry by tilting the containers onto their side, hereby maximizing oxygen transfer efficiency in the aerobic treatment reactors. This is a unique idea protected by ...
-
Manufactured by WTP Equipment Corp.based in CANADA
Automatic conveyor systems for grit removal from continuous or batch wastewater flows – shafted or shaftless grit conveyor screws for submerged duty in horizontal aerated grit tanks or as an inclined grit collector – with the drive unit located outside the tank for easy ...
-
Manufactured by Veolia Water Technologiesbased in FRANCE
The ANITA™ Mox process is specially developed for treatment of streams highly loaded in ammonia. The ANITATM Mox processes - MBBR (Moving Bed Biofilm Reactor) and Hybas (Integrated Fixed Film Activated Sludge) are single-stage deammonification technologies where greater than 90% of ammonia and 75-85% of total nitrogen can be removed. The processes accomplish this removal without the ...
-
Manufactured by Mazzei Injector Company, LLCbased in USA
To meet effluent regulations, municipal wastewater plants employ multiple treatment methods to increase dissolved oxygen prior to final discharge into receiving waters. The Mazzei AirJection Wastewater Aeration Process is ideal for introducing ambient air or concentrated oxygen into effluent basins or piping. Treated effluent is pumped from a basin or directly from the effluent piping through ...
-
Manufactured by Premier Tech Water and Environmentbased in CANADA
The Premier Tech Aqua Timed Dosing Unit reduces peak flows according to specific installation needs, providing superior control of inflow to the treatment ...
-
Manufactured by Schreiber LLCbased in USA
Schreiber’s Screw Pumps are manufactured in two types, Open Flight Screw Pump and Tube Mounted Screw Pump (available in variable angle and stationary angle). The Open Flight Screw Pump is a traditional Archimedes, with a design concept that dates back over 2,000 years. The Tube Mounted Screw Pump is a variation of the Archimedes screw pump inserted in a steel tube (pipe). The Tube Mounted ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
A revolutionary technology for eliminating odorous emissions and minimizing corrosion in vertical sewer ...
-
Manufactured by USP Technologiesbased in USA
Hydrogen Peroxide typically controls odors and corrosion at primary watsewater treatment plant headworks by direct oxidation of hydrogen sulfide (H2S) within the wastewater. In the direct oxidation mode, H2O2 is applied to the wastewater 5-30 minutes prior to the point where the odors are being released, generally as the wastewater line enters the plant ...
-
Manufactured by Waterworks Technologies Inc.based in CANADA
Waterworks’ packaged SFEA treatment plants meet the needs of small businesses, municipalities, RV parks, hotels, resorts or other facilities where the total volume of waste is small (less than 38 m3 per ...
-
Manufactured by Kuhn Technische Anlagen GmbHbased in GERMANY
The KHU Multi-Rake Screen KHU-Boomerang XL is the latest generation KHU multi-rake screen, improving on the standard configuration and designed to suit a large range of applications. The focus of the new development was to achieve maximum flow rate with minimal head loss, while ensuring optimum and steady removal of captured screenings. The new KHU-B XL multi-rake bar screen pushes screening to ...
-
Manufactured by Enduro Compositesbased in USA
Enduro Aquaspan fiberglass (FRP/GRP) baffle wall systems are specifically designed for potable water and wastewater treatment flow control. Baffle walls control the flow of water and increase residence time while partition walls separate zones or enhance mixing. Our baffle and partition walls are pre-engineered and composed of fiberglass panels, angles, and framing members. With a superior ...
-
Manufactured by In-Situ Environmentalbased in USA
The FloPro XCi device integrates water quality and quantity monitoring sensors with vital mining, municipal and industrial equipment and assets. Whether you need to measure flow as well as conductivity, pH and rainfall, or utilize a downward looking ultrasonic depth sensor to measure pond levels, the FloPro is fully expandable for your needs. FloPro is easily interfaced to SCADA/telemetry systems ...
-
Manufactured by MACEbased in AUSTRALIA
The FloPro XCi can be used to monitor just about any water quantity and quality sensor together with vital mining, municipal and industrial equipment and assets. Whether you need to measure flow as well as conductivity, pH and rainfall or utilize a downward looking ultrasonic depth sensor to measure pond levels the FloPro is fully expandable to your needs. Furthermore, FloPro is easily ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you