Wastewater Treatment Monitoring Equipment For Water Monitoring Available In Marshall Islands
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Online, 0-2 ppm, Low Cost, Rugged Dissolved Ozone ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
WDet-7000 multi parameter water analyzer is a high-level integration of a multi parameter water analyzer. Our multi parameter water analyzer uses a modular design, each parameter using independent sample and analysis module, to realize the use of any combination such as COD, ammonia nitrogen, total phosphorus, total nitrogen and a variety of heavy metals. The applied reagent can be configured ...
-
PremiumManufactured by WTW - a xylem brandbased in GERMANY
Digital system to monitor wastewater treatment plants, with up to 2 ...
-
PremiumManufactured by WTW - a xylem brandbased in GERMANY
he perfect solution to support phosphate elimination as well as phosphate load monitoring - on-site analyzer for orthophosphate measurement in the IQ SENSOR ...
-
PremiumManufactured by Genesis Water Technologies, Inc.based in USA
GWT NatZeo treatment media is a low-density, natural and environmentally friendly media typically used in gravity or pressure filters for both drinking water filtration, process water and wastewater reclamation applications. This media provides higher filtration performance, reducing sediment levels to around the 5 micron filtration range. This water treatment media provides significantly ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The Model ST50 is a compact, low cost solution for accurate, repeatable flow rate measurement of air, compressed air or nitrogen. This insertion-style flow meter has no moving parts and is available in probe lengths for installation into pipe diameters from 2.5 inches to 24 inches [63 mm to 610 mm]. It is easily connected into the pipe via a 1/2 inch or 3/4 inch NPT compression ...
-
ShowcaseManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita’s S.sensingTM CS technology offers innovative equipment to control the product dosage in industrial wastewater treatment systems. This state-of-the-art wastewater monitoring system is using a laser-based technology and offers an in situ measurement of the turbidity between the flocs. The advantage of measuring the turbidity between the flocs is that this enables the S.sensingTM CS ...
-
Manufactured by Inplox Water Systems Pvt Ltd.based in INDIA
The ‘Electrox Series’ is our most advanced industrial wastewater treatment system. It combines Activated Flow Series with Electro oxidation technology to achieve multi-stage controlled wastewater treatment. The Electrox Series is extremely effective in treating wastewater with very high content of organic carbon and oxygen demanding substances. It also effectively deals with a host of ...
-
Manufactured by Golden Harvest, Inc.based in USA
The Golden Harvest, Inc. Model GH-9000 Level Control Gate utilizes force-balance control to automatically maintain a constant upstream water level at any given discharge while minimizing head loss. Sizes and materials of construction are available to meet a wide variety of flow control needs ranging from almost zero to 2000 cfs. The gate nearly closes at low discharge and progressively opens as ...
-
Manufactured by Modern Water Inc.based in USA
The AMBC (‘All Membrane Brine Concentrator’) is Modern Water’s cost-effective and proven technology for brine ...
-
Manufactured by Entec International BVbased in NETHERLANDS
Type ESKM-9.0 channel mixers for perfect mixing. Also for your WWTP! Independent tests have shown that the ESKM concept is the most efficient of all known static mixers. ESKM mixing elements are ideal for adding chemical agents as a fundamental part of the total water treatment. Overdose due to poor mixing is thus prevented. The saving on chemical agents is therefore considerable! The plug flow ...
-
Manufactured by Binder Group GmbHbased in GERMANY
The control cabinet is suitable for indoor and outdoor installation; the operator interface is a 7 inch touch screen display with plant specific screens and menus. The complete flexibility and intuitive operation of this open system is its outstanding feature. It enables easy adaptation to system requirements - no “black box” that creates uncertainty - but rather standardized modules ...
-
Manufactured by Baldwin Industrial Systemsbased in AUSTRALIA
Altering the pH or adding chemicals to pre-condition water for subsequent treatment is one of the most widely used steps in wastewater treatment. pH addition and control is critical to achieving not just successful treatment but also to ensure the water meets the relevant regulatory requirements. Baldwin Industrial Systems are widely experienced in both pH control equipment and the addition of ...
-
Manufactured by The MART Corporationbased in USA
Features & General Construction: Closed Loop Zero Discharge: Standard. Wash Pump Suction Strainer: Standard. Adjustable Thermostat: Standard. Temperature Gauge: Standard. 24 Hour 7 Day Clock: Standard. Low Water System Shut-Off: Standard. Door Safety Interlock: Standard. Wash Cycle Timer: Standard. Sheet Steel Cabinet Thickness: 7 ga. 230 V or 460 V 60 Hz, 3-Ph Controls: Standard. Automatic ...
-
Manufactured by GIMAT GmbH Umwelttmesstechnikbased in GERMANY
The AMMONO-CONT is the most cost-effective solution for continually controlling the concentration of ammonium at the wastewater plant on inflow, activation and nitrification. It can also be used in food safety monitoring and the chemical and pharmaceutical sectors, for ...
-
Manufactured by OMEX Environmental Ltd.based in UNITED ARAB EMIRATES
Anomex are blends of sodium and calcium nitrate for simple and accurate ...
-
Manufactured by Solvay Chemicals, Inc.based in USA
Soda ash delivers the foundational properties glass manufacturers the world over rely upon when supplying the expanding needs and demands of their customers in automotive, residential and commercial construction. Soda ash also delivers for such diverse customers as pollution control suppliers looking to treat emissions and improve water quality, as well as consumer manufacturers producing food ...
-
Manufactured by Propeller Pumpsbased in INDIA
A knife gate valve is a type of valve used to regulate the flow of fluid or material in a pipeline. As the name suggests, it has a flat or sharpened blade or gate that is used to cut through the fluid or material, allowing it to pass through the valve or stopping the flow ...
-
Manufactured by Hebei Panshi Pump Co.,Limited.based in CHINA
Cylindrical structure of bearing assembly: convenient to adjust the space between impeller and Throatbush and can be removed completely. Interchangeable anti-abrasive wet parts made of high-chrome alloys. The discharge direction can be oriented to any eight positions at the interval of 45 degrees. Various drive types: DC(direct connection), V-belt drive, gear box reducer, hydraulic couplings, ...
-
Manufactured by Hebei Panshi Pump Co.,Limited.based in CHINA
Frame Plate and Cover Plate: The outer casing is made of grey cast iron or ductile cast iron according to the working pressure, with split with split structure and blots connected,which ensuring security and easy replacement of the wet parts. Interchangeable anti-corrosive wet parts made of natural rubber or other customized elastomer materials. Various drive types: DC(direct connection), V-belt ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you