Water Velocity Monitoring Equipment For Water Monitoring Available In Missouri
-
PremiumManufactured by KISTERSbased in GERMANY
The OSS-PC1 miniature current meter is a ?eld-proven instrument for measuring the velocity of water in shallow open and closed channels. It is used for point measurements of ?ow velocities on the water surface or in vertical pro?les down to the riverbed at ?ow speeds of 0.025 m/s to 6 ...
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
Mobile measuring system for non-contact discharge measurement. With the mobile measuring device RP-30 (Radar Profiler) a surface velocity profile from rivers and channels is created and together with the data of the river cross-section and water level the discharge is determined. - A very helpful measuring device especially for the use in flood ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Mobile measurement system for discharge measurement in watercourses, such as rivers, streams and canals. The NivuFlow Stick is a mobile measurement system for discharge measurement in watercourses, such as rivers, streams and ...
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
Discharge measurement for wide rivers with inhomogeneous distribution of flow velocity. With the system of one master-radar sensor and several slave-radar sensors the velocity is measured at several spots throughout the whole water cross-section. Therefore a very high accuracy of the discharge measurement is guaranteed also for very wide water bodies. ...
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
WELL PROVEN RQ-30 DISCHARGE MEASUREMENT WITH DATA LOGGER AND DATA TRANSMISSION IN COMPACT Housing. The RQ-30 ADMS is an all-in-one discharge measurement System. It contains the non-contact flow velocity and water level sensors of the RQ- 30 and applies the same algorithms and model to calculate the discharge in the RQ-30 ...
-
Manufactured by Efcon Water B.V.based in NETHERLANDS
The Efcon ILS Inline Guillotine is an automatic fixed volume sampler for use on 100 % filled and pressurised effluent lines. The sampled process must be liquid, and free of air / hard solids. Designed for sampling of raw wastewater, the Efcon Inline Guillotine sampler works with a maximum process pressure of 2.5 Bar and optional up to 5 Bar. This sampling method complies to ISO 5667-2, 5667-10 ...
-
Manufactured by KROFTA Waters Technology Ltd. (KWT)based in HUNGARY
Zero velocity water distribution / recovery concept allows the perfect clarification of very high flows with minimum hydraulic turbulence in a tank with only 400 mm water ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
A revolutionary technology for eliminating odorous emissions and minimizing corrosion in vertical sewer ...
-
Manufactured by YSI Incorporated - a Xylem brandbased in USA
The Argonaut-XR offers exceptional value for near shore deployments in less than 40 m of water. Designed specifically for mounting on the bottom of a river, channel, or harbor, the XR features a special mode that automatically adjusts one of its measurement cells for changing water level. Its small size, rugged build, and flexible system architecture make the XR attractive for both real-time ...
-
Manufactured by Aquadatabased in TURKEY
The AKIM Universal Current Meter CM-32 is a measuring instrument to determine the flow velocity of water in open canals, rivers, streams, rivulets, pressure pipes, lakes, and the sea. For measuring flow velocities from 0,025 m/sec. to 12 m/sec. High accuracy Low starting speed of 0,025 m/sec. Application of absolutely and anti-corrosive materials. Made of stainless steel. Almost frictionless ...
-
Manufactured by Lanry Instrumentsbased in CHINA
The DOF6000 series flowmeter consists of Flow calculator and the Ultraflow QSD 6537 Sensor. The Ultraflow QSD 6537 Sensor is used to measure water velocity, depth, and conductivity of water flowing in rivers, streams, open channels and pipes. When used with a companion Lanry DOF6000 Calculator, flow rate and total flow can also be calculated. The flow calculator can calculate the ...
-
Manufactured by Forestry Suppliers, Inc.based in USA
A portable, reliable means of measuring open stream velocities in the range of 0.1 to 25 feet per second or 0.03 to 7.5 meters per second (selectable). Measurements can be read in feet or meters on your choice of two digital readout indicator models, both with better than 1% accuracy. Each meter includes a meter indicator, shoulder strap and snap ring, and PVC shipping/storage tube for the ...
-
Manufactured by Unidata Pty Ltdbased in AUSTRALIA
The Unidata 6527 Starflow QSD SDI-12 Instrument is used to measure water velocity, depth and temperature of water flowing in rivers, streams, open channels and large pipes. When used with a companion Unidata IP data logger, flow rate and total flow can also be calculated. 6527 Starflow QSD SDI-12 Instrument is robust, reliable and easy to use. It is completely sealed against water ingress, low ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Accurate: Teledyne RDI Broadband technology allows for small cells and/or short averaging sampling intervals, thus increasing your data accuracy. // Robust: Collect highly accurate velocities even in difficult environments such as slow flow or rapidly changing flow. // Versatile: ChannelMaster offers a range of 1-128 user-selectable cell sizes from 25 cm - 8 m and profiling ranges from 1 m - ...
-
Manufactured by FLOW-TRONIC S.A.based in BELGIUM
The EMV-500 is a water/wastewater electromagnetic velocity open channel flowmeter sensor which is available in two sizes: SIZE A is suited for pipes or channels from 150 mm to 500 mm diameter, SIZE B is suited for pipes or channels from 500 mm to 2.000 mm diameter. The sensor is encapsulated in an IP68 submersible ultra high molecular polyethylene body to be mounted with a special sensor mounting ...
-
Manufactured by Valeport Ltd.based in UNITED KINGDOM
This small solid-state sensor has been designed specifically for use in open channels where fouling by weed or sewage can be a problem. Valeport's experience in electromagnetic technology has ensured that the Model 801 is a high precision instrument which can be relied upon to give accurate readings (±0.5% of reading plus zero stability) over a wide flow range (±5 m/sec) in only 5cm ...
-
Manufactured by ZHOU ENSI LTDbased in CHINA
GE-104D portable doppler flow velocity meter could measure the liquid velocity in open channel or river, it could measure the depth of water too. It could supply Instantaneous flow rate and totalized flow value, 265M built-in internal memory with 4G SD card, The GE-104D dopper flow velocity meter could remote measure by GPRS wireless module(optional ...
-
Manufactured by NovaLynx Corporationbased in USA
The 280-400 Flow Probe is a highly accurate water velocity instrument for measuring flows in open channels and partially filled pipes. The water velocity probe consists of a protected water turbo prop positive displacement sensor coupled with an expandable probe handle ending in a digital readout display. The water flow meter incorporates true velocity averaging for the most accurate flow ...
-
Manufactured by YSI Incorporated - a Xylem brandbased in USA
The Global Water Flow Probe is a highly accurate water velocity instrument for measuring flows in open channels and partially filled pipes. The water velocity probe consists of a protected water turbo prop positive displacement sensor coupled with an expandable probe handle ending in a digital readout display. The water flow meter incorporates true velocity averaging for the most accurate flow ...
-
Manufactured by YSI Incorporated - a Xylem brandbased in USA
The Global Water Flow Probe is a highly accurate water velocity instrument for measuring flows in open channels and partially filled pipes. The water velocity probe consists of a protected water turbo prop positive displacement sensor coupled with an expandable probe handle ending in a digital readout display. The water flow meter incorporates true velocity averaging for the most accurate flow ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you