Axial Pumps Equipment For Water Pumping Available In Solomon Islands
-
PremiumManufactured by Sebright Products, Inc.based in USA
Count on maximum stability when pressing waste and recyclables in a continuous operation.The horizontal baler type AVOS 1410 BRHF with 30 HP drive capacity and 110,000 lbs. of press force is the optimal machine where continuous performance in long-term operation is required, for example, in central warehouses and dispatch warehouses working in three shifts. The press is equipped with a ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN stand-alone CPT penetrometer set is a lightweight and economical rig with full Cone Penetration Testing (CPT) capabilities. It is suitable for both electrical and mechanical CPT ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
The diesel driven BA600G is an ultra high flow dewatering pump and suitable for pumping dirty water with solids up to 135 mm. The centrifugal pump is vacuum assisted and designed for pumping large volumes of water where the discharge head is of lesser importance. The sound attenuated canopy is equipped with all the necessary practical features such as exterior lighting, lifting points, forklift ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
The BA700G is the largest mobile diesel driven BBA pump and suitable for pumping dirty water with solids up to 145 mm. In addition to the performance curves, the development phase saw a great focus towards mobility. The canopy and drives are created with an optimal balance between the output, fuel consumption and the size of the complete unit. Despite its impressive capacity, this giant is still ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN lightweight CPT penetrometer set is an economical rig with full Cone Penetration Testing (CPT) capabilities. It is suitable for both electrical and mechanical CPT ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
The BA400G is a 16-inch diesel driven high flow pump for flood control and general use. The centrifugal pump is fitted with its own MP100 priming system and is therefore dry self-priming. A modern and variable speed diesel engine meets the highest emission standards for use worldwide. The state-of-the-art sound attenuated canopy is equipped with all possible safety features for carefree pumping. ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
The diesel driven BA500G is a 20-inch high flow dewatering pump and often the first choice from our large volume pumps series. This is because the BA500G produces a relatively high pressure, allowing the pump to discharge water over considerable distances and through extended drainage lines. This is especially suitable for dredging and land reclamation. In addition, the excellent NPSHr curve is ...
-
Manufactured by Gorman-Rupp Co.based in USA
JS Series submersible pumps are excellent for submerged wet well installations with guide rails. These pumps are designed specifically for solids handling and incorporate several engineering features that prevent jamming and clogging, the two most common problems in pumping fluids containing solids. These models feature a semi-axial flow impellers that have a large free passage that will handle ...
-
Manufactured by BSP International Foundations Limitedbased in UNITED KINGDOM
The BSP range of Hydro-packs have been developed after many years of experience in the piling industry and are specifically designed to maximise the performance of BSP piling ...
-
Manufactured by SONHO PUMP MFG. CO., LTD.based in TAIWAN
Axial mix pump application: aquaculture pumps, agricultural irrigation, fish and shrimp drainage, pumping stations, sewer drainage, industrial flood control and so ...
-
Manufactured by Trading House Hydrosila, JSCbased in UKRAINE
The hydraulic motors MFS series are a cost competitive solution for a variety of application conditions. Time-proven design, based on the Sauer 20 series, is reliable and durable in the ...
-
Manufactured by C.R.I. Pumps (Pvt) Limitedbased in INDIA
Vertical turbine pumps are single stage or multistage in construction and submerged impellers allow the pump to be started without need of priming. VT pumps are designed to operate without being affected by large fluctuations of the water level. These pumps are supplied with mixed flow or axial flow impeller for higher flow requirement. The transmission shaft in the column pipes are supported ...
-
Manufactured by Apex Fluid Engineering Ltd.based in UNITED KINGDOM
Single Stage Axially Split Case Pumps with double entry impeller, 150mm(2||) to 400mm(16||) discharge. Designed and developed specifically for the varying applications and continuous operation demands of industry. Also available in high pressure and compact variants ...
-
Manufactured by Hydraulics Spabased in ITALY
Category Piston pumps. Series PE. Range PE. Type PE 14 ...
-
Manufactured by ATM Recyclingsystems GmbHbased in AUSTRIA
The new semi-mobile scrap shear with baling and breaking function has been launched at the IFAT Entsorga 2010. Arnold Technology for Metal Recycling’s (ATM) slogan is the basis for new machine generations like the latest ArnoCut line. In order to process residual material into valuable secondary raw material, multi-functional plants with innovative processing and cleaning systems are ...
-
Manufactured by Hunan Tane Ocean Pump Co., Ltd.based in CHINA
The single-stage double-suction horizontal open design balances the axial force of the pump. The medium-open structure eliminates the need to disassemble the piping system during pump maintenance, and the various bearing structures are designed to meet the needs of different occasions. Executive standard API610 ...
-
Manufactured by Propeller Pumpsbased in INDIA
A horizontal axial flow pump is a type of axial flow pump in which the axis of rotation is oriented horizontally. This design is commonly used in applications that require a high flow rate and a low head, such as irrigation, flood control, and ...
-
Manufactured by Bosch Rexroth AGbased in GERMANY
All-purpose high pressure pump. Size 5 … 1000. Nominal pressure up to 400 bar. Maximum pressure up 450 bar. Open ...
-
Manufactured by Hunan Tane Ocean Pump Co., Ltd.based in CHINA
The single-stage double-suction horizontal open design balances the axial force of the pump. The medium-open structure eliminates the need to disassemble the piping system during pump maintenance, and the various bearing structures are designed to meet the needs of different occasions. Executive standard API610 standard. ...
-
Manufactured by Lukas Hydraulik GmbH A Unit of IDEX Corporationbased in GERMANY
The SC 758 eWXT is the LUKAS all-rounder: Particularly powerful with impressive spreading path, longer cutting edges and "Shark-Tooth Technology". Like all products in this series, the SC 758 eWXT is a liquid-protected rescue system. Operations in heavy rain, high water or even under water are no problem, because it is waterproof. The series includes the 5 Ah or 9 Ah rescue battery with the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you