Axial Pumps Equipment For Water Pumping Available In Yemen
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN lightweight CPT penetrometer set is an economical rig with full Cone Penetration Testing (CPT) capabilities. It is suitable for both electrical and mechanical CPT ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
The diesel driven BA600G is an ultra high flow dewatering pump and suitable for pumping dirty water with solids up to 135 mm. The centrifugal pump is vacuum assisted and designed for pumping large volumes of water where the discharge head is of lesser importance. The sound attenuated canopy is equipped with all the necessary practical features such as exterior lighting, lifting points, forklift ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
The BA400G is a 16-inch diesel driven high flow pump for flood control and general use. The centrifugal pump is fitted with its own MP100 priming system and is therefore dry self-priming. A modern and variable speed diesel engine meets the highest emission standards for use worldwide. The state-of-the-art sound attenuated canopy is equipped with all possible safety features for carefree pumping. ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
The BA700G is the largest mobile diesel driven BBA pump and suitable for pumping dirty water with solids up to 145 mm. In addition to the performance curves, the development phase saw a great focus towards mobility. The canopy and drives are created with an optimal balance between the output, fuel consumption and the size of the complete unit. Despite its impressive capacity, this giant is still ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
Count on maximum stability when pressing waste and recyclables in a continuous operation.The horizontal baler type AVOS 1410 BRHF with 30 HP drive capacity and 110,000 lbs. of press force is the optimal machine where continuous performance in long-term operation is required, for example, in central warehouses and dispatch warehouses working in three shifts. The press is equipped with a ...
-
PremiumManufactured by Gouda Geo-Equipment B.V.based in NETHERLANDS
The 200 kN stand-alone CPT penetrometer set is a lightweight and economical rig with full Cone Penetration Testing (CPT) capabilities. It is suitable for both electrical and mechanical CPT ...
-
PremiumManufactured by BBA Pumps BVbased in NETHERLANDS
The diesel driven BA500G is a 20-inch high flow dewatering pump and often the first choice from our large volume pumps series. This is because the BA500G produces a relatively high pressure, allowing the pump to discharge water over considerable distances and through extended drainage lines. This is especially suitable for dredging and land reclamation. In addition, the excellent NPSHr curve is ...
-
Manufactured by Dalian Yuankun Machinery Equipment Co., Ltdbased in CHINA
Axial split horizontal centrifugal pump-industrial water pumps-China Dalian Yuankun Machinery Equipment Co., Ltd founded in 1998, is a professional manufacturer specialized in OH series, BB series, VS series centrifugal pump products. It is an enterprise with "turnkey" project integrating design, R&D, production, assembly, installation and after-sales. The company covers an area of 46000㎡. The ...
-
Manufactured by Gorman-Rupp Co.based in USA
JS Series submersible pumps are excellent for submerged wet well installations with guide rails. These pumps are designed specifically for solids handling and incorporate several engineering features that prevent jamming and clogging, the two most common problems in pumping fluids containing solids. These models feature a semi-axial flow impellers that have a large free passage that will handle ...
-
Manufactured by BSP International Foundations Limitedbased in UNITED KINGDOM
The BSP range of Hydro-packs have been developed after many years of experience in the piling industry and are specifically designed to maximise the performance of BSP piling ...
-
Manufactured by SONHO PUMP MFG. CO., LTD.based in TAIWAN
Axial mix pump application: aquaculture pumps, agricultural irrigation, fish and shrimp drainage, pumping stations, sewer drainage, industrial flood control and so ...
-
Manufactured by Trading House Hydrosila, JSCbased in UKRAINE
The hydraulic motors MFS series are a cost competitive solution for a variety of application conditions. Time-proven design, based on the Sauer 20 series, is reliable and durable in the ...
-
Manufactured by Fabbrica Italiana Pompe Sommergibili S.r.l. (F.I.P.S.)based in ITALY
ZIRANTEC Split case pumps are single stage, double suction, single volute or double volute, and axially-split case centrifugal pump type. The suction and discharge nozzles are integrally casted in the lower half of the casing and on the same horizontal centre-line and its supporting feet integrally cast in the lower half casing. This construction enables to remove the rotating unit for inspection ...
-
Manufactured by C.R.I. Pumps (Pvt) Limitedbased in INDIA
Vertical turbine pumps are single stage or multistage in construction and submerged impellers allow the pump to be started without need of priming. VT pumps are designed to operate without being affected by large fluctuations of the water level. These pumps are supplied with mixed flow or axial flow impeller for higher flow requirement. The transmission shaft in the column pipes are supported ...
-
Manufactured by Apex Fluid Engineering Ltd.based in UNITED KINGDOM
Single Stage Axially Split Case Pumps with double entry impeller, 150mm(2||) to 400mm(16||) discharge. Designed and developed specifically for the varying applications and continuous operation demands of industry. Also available in high pressure and compact variants ...
-
Manufactured by Hydraulics Spabased in ITALY
Category Piston pumps. Series PE. Range PE. Type PE 14 ...
-
Manufactured by BE Pressure Supply Inc.based in CANADA
Compact electric pressure washer designed for projects around the house such as cleaning driveways, patios, vehicles, siding and more. Electric motor is rated at 1.3 HP and has a total start system that automatically shuts off the pressure washer when the trigger is released to prolong the life of the pump. Equipped with a GFCI plug that greatly reduces the risk of electric ...
-
Manufactured by Kadant PAAL Holding GmbHbased in GERMANY
Kadant PAAL’s range of PACOMAT channel baling presses, which is offered with either vertical or horizontal wire tying, is the ideal baler for most grades of paper, cardboard, cartons, foils, and many other materials. The PACOMAT range of balers is robust and fully automatic yet the PACOMAT is also an affordable and cost-effective baler ...
-
Manufactured by Shijiazhuang Shiza Pump Industry Co.,Ltdbased in CHINA
IS clean water pump is mainly composed of pump body, pump cover, impeller, shaft, seal ring, bushing and suspension bearing components. The housing of the IS centrifugal clean water pump (ie the pump body and the pump cover) constitutes the working chamber of the pump. The impeller, shaft and rolling bearing are the rotor of the pump. The suspension bearing component supports the rotor portion ...
-
Manufactured by Hidrostal Holding AGbased in SWITZERLAND
The Mixed Type Centrifugal Pump. Vertical Turbine Pumps are mixed flow type centrifugal pump designed to move water from an underground well or reservoir. They are typically used where the pumping water level is below the limits of the volute centrifugal pump. Hidrostal's High Head Vertical Turbine Pumps are an ideal choice for most water and wastewater applications. The vertical construction ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you