Cavity Pumps Equipment For Water Pumping Near Asia & Middle East
-
Manufactured by Seepex Gmbhbased in GERMANY
SEEPEX wobble-stator pumps work reliably in many industries. They efficiently transfer liquids of thin to moderate viscosities, even with a high solids content. In contrast to conventional progressive cavity pumps they have a rotating unit with only one joint, which is why the stator ...
-
Manufactured by Watson-Marlow Fluid Technology Groupbased in UNITED KINGDOM
APEX hose pumps: Flows to 6,200 litre/hour, 8bar. Dosing, metering, transfer. Optimised for process uptime. Engineered for a more competitive ...
-
Manufactured by National Oilwell Varco (NOV)based in USA
The ongoing success of our progressing cavity pump has enabled us to develop a pump range, with enhanced design features, specifically aimed at the explosives industry. Working closely with a market leading explosives company, we can now offer a pump to safely and economically handle explosive emulsions and ...
-
Manufactured by Serfilco International Ltdbased in UNITED KINGDOM
SERFILCO Progressive Cavity pumps are engineered to transfer high viscosity materials from drums, tanks and IBC"s. Utilizing the principle of positive displacement, these pumps deliver a continuous flow with little product degradation. The series 700 (Industrial) and series 800 (Sanitary) pumps can transfer materials ranging in viscosity up to 100,000 cps/ ...
-
Manufactured by Hebei Procast Tech Co.,Ltdbased in CHINA
ZA, ZE Chemical Process Pump is designed in accordance with APl610 specification for single-stage, horizontal volute pump. Suitable for conveying clean or contain particles, low or high temperature, neutral or corrosive liquids. Mainly used in oil refineries, petrochemical industry, coal processing and cryogenic engineering, chemical industry, paper, pulp and paper industry, sugar industry and ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
F6013A05 Cover Plate is suction side casing in 8/6F-AH Slurry Pumps which pull together with frame plate around the liners via cover plate bolts. Slurry Pump Cover Plate is in suction end of split casing slurry pump. It's the outer shell of the radial subdivision, and combined with Frame plate together make up the complete pump body. Cover Plate is under pressure of pump cavity, and at the ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
F6013A05 Cover Plate is suction side casing in 8/6F-AH Slurry Pumps which pull together with frame plate around the liners via cover plate bolts. Slurry Pump Cover Plate is in suction end of split casing slurry pump. It's the outer shell of the radial subdivision, and combined with Frame plate together make up the complete pump body. Cover Plate is under pressure of pump cavity, and at the ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Email: Sales7@tobeepump.com Web: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store | www.tobee.cc TobeeĀ® Slurry Pump Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. Generally, the material of slurry pump cover plate less than 6/4 size is made from Gary Iron, greater than 6/4 size is ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Email: Sales7@tobeepump.com Web: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store | www.tobee.cc D3013-D21 Cover Plate is one of wear parts for 4/3D-AH slurry pumps. TobeeĀ® Slurry Pump Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. Generally, the material of slurry pump cover plate ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
F6013A05 Cover Plate is suction side casing in 8/6F-AH Slurry Pumps which pull together with frame plate around the liners via cover plate bolts. Slurry Pump Cover Plate is in suction end of split casing slurry pump. It's the outer shell of the radial subdivision, and combined with Frame plate together make up the complete pump body. Cover Plate is under pressure of pump cavity, and at the ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Tobee TL(R) FGD Limestone Slurry Pump is the new generation high efficiency energy saving pump product elaborately researched and developed by Tobee through absorbing the technical advantages from similar FGD pumps from domestic and abroad, with reference to the technical specifications of flue gas desulfurization project, aiming at the characteristic of FGD system of transporting medium through ...
-
Manufactured by Hebei Tobee Pump Co.,Limitedbased in CHINA
Email: Sales7@tobeepump.com Web: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store | www.tobee.cc C2032HSPRD21 Frame Plate is in drive end of 3/2C-AH Split Casing Slurry Pump. TobeeĀ® Slurry Pump Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. Generally, the material of slurry pump ...
-
Manufactured by Botou Saiken Pumps Co., Ltdbased in CHINA
RPB Rubber lobe pump, also called as sludge lobe pump or sludge rotor pump, can be made of cast iron or ductile iron or stainless steel , Tri-lobe, Helical, EPDM coated rotors , shaft Hardened Steel, suitable for wastewater, chemical, oil.etc ...
-
Manufactured by Jinan Chicoo Fluid Control Equipment Co., Ltdbased in CHINA
ZQ-01 series high vacuum differential pressure solenoid valve is a special solenoid valve installed on the vacuum pump. When in use, the valve and the pump are connected to the same power supply, and the opening and stopping of the pump directly control the opening and closing of the ...
-
PremiumManufactured by SIEBTECHNIK GMBHbased in GERMANY
The drilling rigs use drilling mud (high density drilling fluid) to pack to drill column. The drilling mud is a mix of chemicals but there are three basic types; water based, diesel based, and synthetic oil based. The H-900-OMC unit is almost always used on synthetic oil based drilling mud or diesel based mud. Synthetic oil based drilling mud is the most common type to be used in the offshore ...
-
Manufactured by Hebei GN Separation and Conveying Equipment Co.,Ltdbased in CHINA
GNG series Progressive cavity pump is also called single screw pump. The Progressive cavity pump consists of helical rotor turning inside a helical stator. When the rotor turns inside the stator, the honeycomb progresses spirally along the axis of the pump without changing either shape or volume. This action transfers the material from the pump intake to the pump discharge without degrading the ...
-
Manufactured by ZiBo ZhuoXin Pump Industry Co,.Ltdbased in CHINA
2SKC series liquid ring vacuum pumps(double stage liquid ring vacuum pump) are used for exhausting and compressing air and other noncorrosive, water-insoluble and solid particle-free gases so as to create vacuum and pressure in closed containers. A little liquid is allowed in the ...
-
Manufactured by Weifang Subtor Rotating Precision Machinery Co.,Ltd.based in CHINA
A downhole progressive cavity pump connects the stator and the rotor of the pump to the end of the tube and sucker rod. The ground drive equipment then rotates the rotor through use of the sucker rod, thereby lifting underground liquid to the surface. This cavity pump is often used lift crude oil under 8000mPa.s, making it useful for most thick oil wells, such as high sand wells, high gas wells, ...
-
Manufactured by Weifang Subtor Rotating Precision Machinery Co.,Ltd.based in CHINA
We can design and process rotors in different geometric shapes to meet specific customer requirements. The metal materials used can also be treated for surface hardening or vacuum heating, with the hardness of the metal after treatment reaching HRC60-65°. The surface can also be sprayed with a tungsten carbide or chromium carbide in specific industries to give the surface a hardness of ...
-
Manufactured by Weifang Subtor Rotating Precision Machinery Co.,Ltd.based in CHINA
A class progressive cavity pumps produced by Subtor feature a structural design with a bearing black, which can bear a higher axial load than traditional designs. The pump is designed to handle any transport mediums, including water, with a maximum solid content of 45%. The pumps are suitable for the following applications: 1. Food processing factories: transport jams, meat pastes, starches, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you