Cavity Pumps Equipment For Water Pumping Near Tonga
-
Manufactured by Aquate Limitedbased in NEW ZEALAND
Aquate Low Pressure Systems are ideal for rural areas where conventional gravity sewer systems are impractical or cost prohibitive. In contrast to traditional gravity sewer networks where deep pipes are installed along with a series of large pump stations, low pressure systems utilise small pump stations on each property to transfer household wastewater to a centralised treatment facility. ...
-
Manufactured by Dando Drilling International Ltd,based in UNITED KINGDOM
Occupying a small footprint, this compact yet powerful rotary drilling rig allows the user to carry out a wide range of drilling techniques to medium depths in areas of difficult terrain and limited space. It can be used for water well, mineral exploration and geotechnical applications. Available in 4 tonne or 6 tonne pullback versions, the fully customisable machine comes with a range of engines ...
-
Manufactured by Watson-Marlow Fluid Technology Groupbased in UNITED KINGDOM
APEX hose pumps: Flows to 6,200 litre/hour, 8bar. Dosing, metering, transfer. Optimised for process uptime. Engineered for a more competitive ...
-
Manufactured by Wangenbased in GERMANY
Low Life Cycle Costs. Excellent price/performance ratio. High pressure performance. Maintenance-friendly. Good price/performance ratio (standard product group). Optionally with base plate or mobile. Good dosing properties. Constant flow speed in the suction housing prevents desposits or sedimentation. Rigorous modular principle for high flexibility. Compact design. High suction lift ...
-
Manufactured by Wangenbased in GERMANY
Low Life Cycle Costs. High operational reliability. High priming capacity. High pressure performance. No foreign body deposits in the suction housing. Rigorous modular principle for high flexibility, low stocking of spare parts, short downtimes for maintenance and repairs. Almost pulsation-free conveyance. Easy fitting to slurry tankers or trolleys. Smooth running thanks to hollow rotors. ...
-
Manufactured by Wangenbased in GERMANY
Low Life Cycle Costs. Excellent price/performance ratio. Large viscosity range. High operational reliability. High dosing accuracy, also at low speed. High priming capacity. Long service life. Compact construction based on modular principle for high flexibility. Rigorous modular principle simplifies the handling of spare parts. Optionally with base plate. Low servicing costs. Compact design ...
-
Manufactured by Wangenbased in GERMANY
The WANGEN processing cavity pump of type GL-F is compactly built. It can be used to achieve high conveyance volumes and counter pressures. Attached to tank trailers, slurry tankers and umbilical hose systems, it is equally suited for mediums with different properties, such as fluid or slow-moving, mash-like, or loaded with ...
-
Manufactured by Wangenbased in GERMANY
Excellent price/performance ratio. Low Life Cycle Costs. Large viscosity range. Good pumping performance even against high pressure (max. 6 or 12 bar). High operational reliability. Consistant diameters at joint connections for constant flow rates. Rigorous modular principle for high flexibility, low stocking of spare parts, short downtimes for maintenance and repairs. Almost pulsation-free ...
-
Manufactured by Wangenbased in GERMANY
The changing of wear parts with very few actions, without removing the pump from the pipeline system thanks to Service in Place. The Xpress pump range has been specially developed for easy maintenance and to considerably shorten the servicing time and thus reduce costs. Reliable pumping of media, along with fast rotor/stator changes are ensured by the X-LIFT quick change system developed by ...
-
Manufactured by Varisco s.r.l.based in ITALY
Progressing cavity screw pumps for liquids of any kind of viscosity that contain abrasives and a high percentage of solids or fibres. They are used in industrial ...
-
Manufactured by Wangenbased in GERMANY
Low Life Cycle Costs. High operational reliability. High priming capacity. Long service life. Good pumping performance even against high pressure (max. 6 or 12 bar). Rigorous modular principle for high flexibility, low stocking of spare parts, short downtimes for maintenance and repairs. Almost pulsation-free conveyance. Easy fitting to slurry tankers or trolleys. Smooth running thanks to hollow ...
-
Manufactured by Pumpability Pty Limitedbased in AUSTRALIA
Floating stator construction is a little more forgiving in abrasive applications or dry-running. Suction at the front of the pump, discharge at the motor end, vertically up or to either side. Hand-holes included as standard. Integrated base feet adapt to many kinds of support surfaces. Nominal flows up to 2.5 m3/h. Pressures up to 10 bar. Body in robust cast iron construction. Rotors in chromed ...
-
Manufactured by Pumpability Pty Limitedbased in AUSTRALIA
New series with special patented joints for much reduced overall length. Hand-holes included as standard. Integrated base feet adapt to many kinds of support surfaces. Nominal flows up to 90 m3/h. Pressures up to 24 bar. Body in robust cast iron construction. Rotors in tempered or standard AISI420 stainless steel. Stators in NBR or Viton. Single mechanical ...
-
Manufactured by Pump Solutions Group (PSG)based in USA
ALMATEC's high-pressure diaphragm pumps made of plastic have been specially developed for charging filter presses with chemical wastes and special sludge. With a driving pressure of max. 7 bar (100 psig), pumps of the series AH build up a delivery pressure of 15 bar (218 psig) on account of the internal pressure boost. These genuine double-action pneumatic diaphragm pumps are available in three ...
-
Manufactured by ESD Waste2Water, Inc.based in USA
ESD’s Soil Vapor Extraction Systems include blower or vacuum pump, TEFC or XP motor, moisture separator with high level switch, inlet filter and a prewired, pretested, custom NEMA IV control panel. Vacuum gauges, flow indicators, temperature indicators and filtration can be specified per your application. All components are fully integrated and prewired on a marine grade aluminum skid with ...
-
Manufactured by ESD Waste2Water, Inc.based in USA
ESD’s Dual Phase Recovery Systems include high vacuum blower or pump, TEFC or XP motor, moisture separator with level controls, centrifugal or progressive cavity transfer pump, vacuumrelief valve, inlet filter and a pre wired, pre tested, custom NEMA IV control ...
-
Manufactured by Roto Pumps Ltdbased in INDIA
Dosing Pumps - The best choice for precise metering applications. These pumps are developed for low flow applications that demand high accuracies and repeatability with unique advantages of smooth and non-pulsating flow. These dosing pumps can handle clean and clear liquids. The pump is ideal for either intermittent or continuous dosing duties. These dosing pumps can handle minimum flow as low as ...
-
Manufactured by Roto Pumps Ltdbased in INDIA
Wide throat type inlet allows gravity flow of highly viscous (plastico – Viscous) material on to the augur-on-coupling rod which pushes the substance to the pumping element. Wide throat pumps with the twin paddle bridge breaker arrangement at the top are designed for handling extremely difficult media with very high solid content and non – flowing properties. Available in close ...
-
Manufactured by Roto Pumps Ltdbased in INDIA
These Heavy Duty Semi-Hygienic Pumps are designed for handling food and beverages pumps industry applications. All metallic parts in contact with the medium being handled are fabricated in smooth finish stainless steel. These food pumps are provided with metal bonded aseptic food grade stator resistant to oil & fats. These pumps are standard with closed universal joints enabling it to handle ...
-
PremiumManufactured by Lutz Pumpen GmbHbased in GERMANY
The industrial version of the progressive cavity pump HD-E-SR transfers the advantages of the drum pump to highly viscous media. With its easily detachable design and small outer diameter (max. 41 mm), it enables the filling of viscous liquids up to 30,000 mPas. The pump is easy to dismantle and clean and can be combined with electric or compressed air motors to facilitate the emptying of liquids ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you