impeller pump News
-
Update Landy-Sel released
Our pump selection program Landy-Sel has been updated. The LANDY pump range now includes the DCP type pump, a submersible open impeller ...
-
Landy-Sel update released
Our pump selection program Landy-Sel has been updated. The LANDY pump range now includes the DCP type pump, a submersible open impeller ...
-
Avoid the risk of Clogging, use Dragflow Chopper
Protect your pump from clogging. Use the new DRAGFLOW Chopper to increase the efficiency of the No Clog recessed impeller Pump (EL 60 RI). The Chopper has been specifically designed for use with our upcoming RI series, the Recessed Impeller, series of pumps which are a high - efficiency, non-clog design suitable for passing stringy or fibrous material create to effectively chop material before ...
-
Sewage Pump Range Expands with New 12-inch BA300KS
We are excited to announce the introduction of the new BA300KS portable sewage pump. The new pump package will be a great addition to the already popular KS screw channel impeller pumps. This 12 x 12 inches unit has been developed for work in large sewage systems in densely populated areas. With a pump flow of 4840 US gpm and a solids handling larger than 5 inches, you can say that this is a real ...
By BBA Pumps BV
-
65QV-SP Long Shaft Vertical Cantilevered Slurry Pumps to Argentina
Email: Sales7@tobeepump.com Web: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store Impeller DAHF3056QU1A05 with Throatbush DAHF3083A05 are combined into the 3D AHF Froth Slurry Pump. DAHF3056QU1A05 is a Impeller for 3D-AHF Horizontal Froth Pump is a heavy duty slurry pump designed to handle difficult tenacious froth. Designed to handle heavy froth, the AHF Horizontal Froth pump has ...
-
The pump body part is the core of the slurry pump
The pump body part is the core of the slurry pump Slurry pump pump body structure: The pump body section includes pump cover, impeller and shaft seal The pump body and bracket are bolted connection Depending on the requirements, the pump outlet position can be rotated at 45 °intervals by eight different angles. The slurry pump cover has a double shell structure and a single shell ...
-
Horizontal slurry pump pump body structure
The pump body part is the core of the Horizontal slurry pump pump. Slurry pump pump body structure: The pump body section includes pump cover, impeller and shaft seal The pump body and bracket are bolted connection Depending on the requirements, the pump outlet position can be rotated at 45 °intervals by eight different angles. The slurry pump cover has a double shell structure and a ...
-
New Self Priming Pumps from Cornell
Cornell Pump introduces two new pump options to the self-priming series. The STL and STH pumps expand the range of application options for self-primers with innovative design. The 8STL pump is designed to run at 1800 RPM so that it can be directly connected to an SAE engine without the need for any adaptation. The higher RPM operation makes the 8STL pump better suited to portable pumping ...
-
Gorman-Rupp Introduces The Infinity Line of Submersible Pumps
New Efficient, Dependable Solids-Handling Pumps The new Gorman-Rupp line of Infinity submersible solids-handling pumps are designed to provide you with the ultimate in pumping performance. Built to the same exacting standards you’ve come to expect from our industry-leading self-priming pumps, these pumps are designed for easy maintenance and constructed for long life. The Infinity line is ...
-
Tobee 12/10G-GH and 8/6E-G Gravel Pump Parts Impellers
Email: Sales7@tobeepump.com Web: www.tobeepump.com | www.slurrypumpsupply.com | www.tobee.store | www.tobee.ccOne of our European partners ordered some 12x10G-GH and 8x6E-G sand pump impellers GGH10137A05, EG86137A05. They are ready to play their part in order to make the pumps work better. Tobee® offers G/GH Tunneling Sand Pump Spare Parts, from 6/4D-G, 6/4E-G, 8/6E-G, 10/8S-G, 10/8S-GH, ...
-
A Horde of Cornell Pumps in Mongolia
A first-hand account of 14NHGH Redi-Prime® pumps installation, testing, and site training in Mongolia. Four Cornell 14NHGH Redi-Prime pumps replaced aging Soviet infrastructure in Ulaanbaatar Mongolia. Promoting tourism from SE Asia, Europe, and Australia, the Mongolian government has been keen on improving infrastructure. Prior to arrival of the 14NHGH pumps, the treatment plant had been ...
-
SP Slurry Pump going strong after three years in service
An Australian sand quarry began using a Cornell 6SP rubber-lined slurry pump in May of 2012, and it has run without a seal leak since! The sand quarry extracts approximately 50 tons per hour of materials that is fed through the Cornell 6SP as a slurry, which is then spun in a cyclone seperator to extract the usable sand. The detritus is separated from the sand and returned to the quarry area. ...
-
Watson-Marlow Bredel launches New 620 series pump
Watson-Marlow's new 620 series pump offers exceptional levels of performance, accuracy and output for the biotech, chemical and chemical and water and waste. It features a choice of drives, a choice of pumpheads, PIN process protection and minimal downtime. The new 620 series represents the next generation in medium sized peristaltic pumps. With the new 620 range, Watson-Marlow is ...
-
Cornell cutter pump ranked most innovative new product in industry
Clackamas-based Cornell Pump Company awarded 2012 Product Innovation of the Year, by Pumps & Systems Magazine, voice of the pump and rotating equipment industry. The fourth annual Product Innovation of the Year, judged by Pumps & Systems magazine, was hotly contested. Dozens of innovative products vied for the distinction of being Product of the Year, and Clackamas-based Cornell Pump ...
-
Recycling of cars made green and cleaner with Verderflex peristaltic pumps
Did you know that 95% of car materials can be used again/ recycled? At the end of its’ life, a car yields on average, 140 kilos of shredder waste: 26 kg of metals, 69 kg of plastics, 11 kg of minerals and 24 kg of fibres. In Tiel, Netherlands, a Post Shredder Treatment plant (PST) was built in 2011, for the recycling of cars. The PST plant is one of the two plants in Europe that are able ...
-
Submersible Sewage Sludge Pump with Cooling Jacket
4 sets Hydroman™ Submersible Sewage Sludge Pumps with Cooling Jacket have been ready for shipping to Latin America,this Submersible Sewage Sludge Pump used to temporarily remove the sludge that occurs in a waste water treatment plant and operated at 80.0 lps or 1268 gpm (288.0 m3/h) and 30 meters head, the specific model is Hydroman™ TJQ300-30-55 Submersible Sewage Sludge Pumps. ...
-
Submersible Sewage Sludge Pump with Cooling Jacket
4 sets Hydroman™ Submersible Sewage Sludge Pumps with Cooling Jacket have been ready for shipping to Latin America,this Submersible Sewage Sludge Pump used to temporarily remove the sludge that occurs in a waste water treatment plant and operated at 80.0 lps or 1268 gpm (288.0 m3/h) and 30 meters head, the specific model is Hydroman™ TJQ300-30-55 Submersible Sewage Sludge Pumps. ...
-
Ruhrpumpen launches their magnetic driven, heavy duty, single stage centrifugal process pump
Witten, Germany – Ruhrpumpen, an innovative and efficient company on pump technology, announces today the launch of the SCE-M, a magnetic Drive System and Axial Thrust Balancing pump for the petrochemical industry and refineries promising a 100% leakage free performance. This new pump SCE-M is an is an overhung, single stage, radially split, end suction, heavy duty centrifugal process pump ...
-
Mining dewatering use submersible slurry pump with side cutters(agitator system)
Submersible slurry pumps, also known as submerged suction pump and submersible dredging pump.The pump is designed and developed by Hebei Zidong Pump company. Our submersible slurry pump is originally used in tailing handling and high-strength working environment for coal slag delivery. The main components of submersible sand pumps, like impeller, are as the same structural prototype as horizontal ...
-
Less and More: Why You Should Pump Slurries with a Peristaltic Pump
LESS WATER Peristaltic Pumps Use Less Water Hose pumps can circulate slurry SGs of 1.6 to 1.8 or up to 80% solid content. The traditional centrifugal pump loses efficiency when the slurry SG reaches 1.3 or 30% solids. With this limitation, slurry pumps have significant process water demands : on a plant processing 70 tonnes of ore per hour, every time a hose pump replaces a process slurry pump, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you